Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

1 files changed, 24 insertions, 11 deletions

diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232b686..5352b4e5a7d 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -47,6 +47,7 @@
 #include <mach/pxafb.h>
 #include <plat/i2c.h>
 #include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
 }
 
 /* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
 {
 	if (state)
 		viper_icr_set_bit(VIPER_ICR_CF_RST);
 	else
 		viper_icr_clear_bit(VIPER_ICR_CF_RST);
 }
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+	.cd_gpio	= VIPER_CF_CD_GPIO,
+	.rdy_gpio	= VIPER_CF_RDY_GPIO,
+	.pwr_gpio	= VIPER_CF_POWER_GPIO,
+	.reset		= viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+	.name		= "viper-pcmcia",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &viper_pcmcia_info,
+	},
+};
 
 /*
  * The CPLD version register was not present on VIPER boards prior to
@@ -301,15 +316,6 @@ static void __init viper_init_irq(void)
 	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
 				viper_irq_handler);
 	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
-	/*
-	 * 8250 doesn't support IRQ_TYPE being passed as part
-	 * of the plat_serial8250_port structure...
-	 */
-	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
 }
 
 /* Flat Panel */
@@ -539,6 +545,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -548,6 +555,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -692,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
 	&viper_mtd_devices[0],
 	&viper_mtd_devices[1],
 	&viper_backlight_device,
+	&viper_pcmcia_device,
 };
 
 static mfp_cfg_t viper_pin_config[] __initdata = {
@@ -908,6 +917,10 @@ static void __init viper_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* Wake-up serial console */
 	viper_init_serial_gpio();