ARM: config: sort select statements alphanumerically

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 60 insertions, 60 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8e6288de69b..11aa7399dc0 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 	select USE_OF
 	help
 	  Include support for Marvell PXA3xx based platforms using
@@ -44,13 +44,13 @@ config ARCH_LUBBOCK
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_ZYLONITE
 	bool
-	select PXA3xx
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -65,19 +65,19 @@ config MACH_ZYLONITE320
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -87,29 +87,29 @@ config ARCH_PXA_IDP
 
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
+	select ARCOM_PCMCIA
 	select HAVE_PWM
+	select I2C_GPIO
+	select ISA
+	select PXA25x
 	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
-	select PXA27x
+	select ARCOM_PCMCIA
 	select ISA
+	select PXA27x
 	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Cogent
 	  CSB726 System On Module.
@@ -121,11 +121,11 @@ config CSB726_CSB701
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
-	select PXA27x
 	select IWMMXT
-	select PXA25x
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H if PCI
+	select PXA25x
+	select PXA27x
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -137,10 +137,10 @@ config MACH_EXEDA
 
 config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_CAPC7117
 	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
@@ -168,22 +168,22 @@ endchoice
 
 config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
-	select PXA25x
 	select MTD
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
 	select MTD_CFI
+	select MTD_CFI_INTELEXT
 	select MTD_CHAR
+	select MTD_PHYSMAP
+	select PXA25x
 	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
@@ -195,14 +195,14 @@ config TRIZEPS_PXA
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 choice
 	prompt "Select base board for Trizeps module"
@@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
 	depends on MACH_PCM027
+	select HAVE_PWM
 
 choice
 	prompt "display on pcm990"
@@ -266,19 +266,19 @@ config MACH_COLIBRI
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
-	select PXA3xx
 	select CPU_PXA320
+	select PXA3xx
 
 config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
@@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD
 
 config MACH_VPAC270
 	bool "Voipac PXA270"
-	select PXA27x
 	select HAVE_PATA_PLATFORM
+	select PXA27x
 	help
 	  PXA270 based Single Board Computer.
 
@@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -309,16 +309,16 @@ config MACH_HIMALAYA
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
 	select GPIO_SYSFS
+	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a
 	  MIO A701. Currently there is only basic support
@@ -326,9 +326,9 @@ config MACH_MIOA701
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -393,9 +393,9 @@ config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -404,9 +404,9 @@ config MACH_PALMTX
 	bool "Palm T|X"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -415,9 +415,9 @@ config MACH_PALMZ72
 	bool "Palm Zire 72"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -426,9 +426,9 @@ config MACH_PALMLD
 	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -441,10 +441,10 @@ config MACH_CENTRO
 	bool "Palm Centro 685 (GSM)"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
@@ -453,37 +453,37 @@ config MACH_TREO680
 	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
 config MACH_RAUMFELD_RC
 	bool "Raumfeld Controller"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 
 config MACH_RAUMFELD_CONNECTOR
 	bool "Raumfeld Connector"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config MACH_RAUMFELD_SPEAKER
 	bool "Raumfeld Speaker"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
 	select SHARP_PARAM
+	select SHARP_SCOOP
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
@@ -526,11 +526,11 @@ config MACH_HUSKY
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
 	select I2C
 	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
@@ -575,8 +575,8 @@ config MACH_ICONTROL
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
 	select FB_W100
+	select PXA25x
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -628,8 +628,8 @@ config MACH_E800
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 endif
 endmenu
 
@@ -720,9 +720,9 @@ config SHARPSL_PM
 config SHARPSL_PM_MAX1111
 	bool
 	select HWMON
+	select SENSORS_MAX1111
 	select SPI
 	select SPI_MASTER
-	select SENSORS_MAX1111
 
 config PXA_HAVE_ISA_IRQS
 	bool