diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:22 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:22 -0800 |
| commit | 2ac9d7aaccbd598b5bd19ac40761b723bb675442 (patch) | |
| tree | 09132a44e33798aaa5e80f10bf025b510015cab3 /arch/arm/mach-pxa | |
| parent | 5ede3ceb7b2c2843e153a1803edbdc8c56655950 (diff) | |
| parent | dcf7ec5ee62a78123057a1e286c88ca739717409 (diff) | |
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Driver specific changes
Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: sa1100: clean up of the clock support
ARM: pxa: add dummy clock for sa1100-rtc
RTC: sa1100: support sa1100, pxa and mmp soc families
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: Clean out ost register
Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
ARM: EXYNOS: Modified files for SPI consolidation work
ARM: S5P64X0: Enable SDHCI support
ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
ARM: S5P64X0: Add HSMMC setup for host Controller
ARM: EXYNOS: Add USB OHCI support to ORIGEN board
USB: Add Samsung Exynos OHCI diver
ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
ARM: EXYNOS: Add USB OHCI device
net: macb: fix build break with !CONFIG_OF
i2c: tegra: Support DVC controller in device tree
i2c: tegra: Add __devinit/exit to probe/remove
net/at91_ether: use gpio_is_valid for phy IRQ line
ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
...
Diffstat (limited to 'arch/arm/mach-pxa')
73 files changed, 377 insertions, 503 deletions
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 4cb069fd9af..ccdac4b6a46 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info) { int ret; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_FALLING, "AM200", info->par); if (ret) diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index fa8bad235d9..76c4b949403 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info) int ret; struct broadsheetfb_par *par = info->par; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_RISING, "AM300", par); if (ret) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a34de9a0d5e..c35456f02ac 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -180,7 +180,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), + .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ), }; diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index c2f0be040d2..c91727d1fe0 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING } }; @@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void) static struct plat_serial8250_port ti16c752_platform_data[] = { [0] = { .mapbase = 0x14000000, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [1] = { .mapbase = 0x14000040, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [2] = { .mapbase = 0x14000080, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [3] = { .mapbase = 0x140000c0, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 13518a70539..431ef56700c 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -33,7 +33,7 @@ /* GPIO IRQ usage */ #define GPIO83_MMC_IRQ (83) -#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ) +#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ) /* MMC power enable */ #define GPIO105_MMC_POWER (105) @@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = gpio_to_irq(95), + .irq = PXA_GPIO_TO_IRQ(95), .chip_select = 0, .controller_data = &cm_x270_libertas_chip, .platform_data = &cm_x270_libertas_pdata, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index ec170a552c2..8fa4ad27edf 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -58,8 +58,8 @@ extern void cmx270_init(void); #define CMX255_GPIO_IT8152_IRQ (0) #define CMX270_GPIO_IT8152_IRQ (22) -#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ) -#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) +#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ) +#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ) #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource cmx255_dm9000_resource[] = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7236974da0b..4b981b82d2a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -64,7 +64,7 @@ #define GPIO82_MMC_IRQ (82) #define GPIO85_MMC_WP (85) -#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) +#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 6a685165c9f..29d5d541f60 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -218,8 +218,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), - .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; @@ -249,7 +249,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { }; static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { - .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ), }; static struct platform_device colibri_pxa270_ucb1400_device = { diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index c01059a61f3..0846d210cb0 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 5028f2300d5..6ad3359063a 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9d4dc5970b9..66600f05e43 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = { .chip_select = 0, .platform_data = &corgi_ads7846_info, .controller_data= &corgi_ads7846_chip, - .irq = gpio_to_irq(CORGI_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 29034778bfd..39e265cfc86 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -40,7 +41,9 @@ static struct gpio charger_gpios[] = { { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, + { CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" }, }; static void corgi_charger_init(void) @@ -90,7 +93,12 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) { int is_resume = 0; - dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, " + "GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n", + PEDR, gpio_get_value(CORGI_GPIO_AC_IN), + gpio_get_value(CORGI_GPIO_CHRG_FULL), + gpio_get_value(CORGI_GPIO_KEY_INT), + gpio_get_value(CORGI_GPIO_WAKEUP)); if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { @@ -124,14 +132,21 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) static unsigned long corgi_charger_wakeup(void) { - return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); + unsigned long ret; + + ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN)) + | (!gpio_get_value(CORGI_GPIO_KEY_INT) + << GPIO_bit(CORGI_GPIO_KEY_INT)) + | (!gpio_get_value(CORGI_GPIO_WAKEUP) + << GPIO_bit(CORGI_GPIO_WAKEUP)); + return ret; } unsigned long corgipm_read_devdata(int type) { switch(type) { case SHARPSL_STATUS_ACIN: - return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + return !gpio_get_value(CORGI_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 2e0425404de..18fd177073f 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,9 +415,29 @@ static struct resource pxa_rtc_resources[] = { }, }; +static struct resource sa1100_rtc_resources[] = { + [0] = { + .start = 0x40900000, + .end = 0x409000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, + .num_resources = ARRAY_SIZE(sa1100_rtc_resources), + .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { @@ -1051,6 +1071,36 @@ struct platform_device pxa3xx_device_ssp4 = { }; #endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +struct resource pxa_resource_gpio[] = { + { + .start = 0x40e00000, + .end = 0x40e0ffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_GPIO0, + .end = IRQ_GPIO0, + .name = "gpio0", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO1, + .end = IRQ_GPIO1, + .name = "gpio1", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO_2_x, + .end = IRQ_GPIO_2_x, + .name = "gpio_mux", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 2fd5a8b3575..1475db10725 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp; extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; +extern struct platform_device pxa_device_gpio; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index bd396ba67af..d80c0ba9a09 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -70,7 +70,7 @@ /* common GPIOs */ #define GPIO11_NAND_CS (11) #define GPIO41_ETHIRQ (41) -#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ) #define GPIO115_WLAN_PWEN (115) #define GPIO19_WLAN_STRAP (19) #define GPIO9_USB_VBUS_EN (9) @@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = IRQ_GPIO(116), + .irq = PXA_GPIO_TO_IRQ(116), .chip_select = 0, .controller_data = &em_x270_libertas_chip, .platform_data = &em_x270_libertas_pdata, @@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = { static struct i2c_board_info em_x270_i2c_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = PXA_GPIO_TO_IRQ(0), .platform_data = &em_x270_da9030_info, }; diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 69473db9775..f79a610c62f 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -119,8 +119,8 @@ struct resource eseries_tmio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), - .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index ce16bdae96d..fb9b62dcf4c 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -252,8 +252,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), - .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), .flags = IORESOURCE_IRQ, }, /* SD part */ @@ -263,8 +263,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [3] = { - .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { .modalias = "ads7846", .bus_num = 2, .max_speed_hz = 2600000, /* 100 kHz sample rate */ - .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ), .platform_data = &tsc2046_info, .controller_data = &tsc2046_chip, }, @@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = { .name = "ac", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD9_nAC_IN), - .end = gpio_to_irq(GPIOD9_nAC_IN), + .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), + .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), }, [1] = { .name = "usb", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD14_nUSBC_DETECT), - .end = gpio_to_irq(GPIOD14_nUSBC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), }, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index e239b82c99d..67400192ed3 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info1, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, { .modalias = "mcp2515", @@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info2, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, { .modalias = "mcp2515", @@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info3, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, { .modalias = "mcp2515", @@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info4, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } }; diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index fbabd84e110..8af1840e12c 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -75,8 +75,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(4), - .end = IRQ_GPIO(4), + .start = PXA_GPIO_TO_IRQ(4), + .end = PXA_GPIO_TO_IRQ(4), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 6d7eab3d086..f02fa1e6ba8 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -172,9 +172,9 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) -#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) -#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) +#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ) +#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ) +#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD) #define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 5dfd1195a5a..f3c3493b468 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -66,18 +66,18 @@ /* * Corgi Interrupts */ -#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) -#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) -#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) -#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) -#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) -#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ -#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ +#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0) +#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3) +#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4) +#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10) +#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11) +#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */ +#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */ /* @@ -98,7 +98,7 @@ CORGI_SCP_MIC_BIAS ) #define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) -#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0) #define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */ #define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */ diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 747ab1a71f2..2628e7b7211 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -19,8 +19,8 @@ #define CSB726_FLASH_SIZE (64 * 1024 * 1024) #define CSB726_FLASH_uMON (8 * 1024 * 1024) -#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN) -#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501) +#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN) +#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501) #endif diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h deleted file mode 100644 index 41b4c93a96c..00000000000 --- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Written by Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __MACH_PXA_GPIO_PXA_H -#define __MACH_PXA_GPIO_PXA_H - -#include <mach/irqs.h> -#include <mach/hardware.h> - -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - -#include <plat/gpio-pxa.h> -#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 004cade7bb1..0248e433bc9 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -25,24 +25,8 @@ #define __ASM_ARCH_PXA_GPIO_H #include <asm-generic/gpio.h> -/* The defines for the driver are needed for the accelerated accessors */ -#include "gpio-pxa.h" -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#include <mach/irqs.h> +#include <mach/hardware.h> -static inline int irq_to_gpio(unsigned int irq) -{ - int gpio; - - if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) - return irq - IRQ_GPIO0; - - gpio = irq - PXA_GPIO_IRQ_BASE; - if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) - return gpio; - - return -1; -} - -#include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 9b898680b20..dba14b6503a 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -24,7 +24,7 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_USB_GPIOx 41 /* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) +#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) #define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) #define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) @@ -35,7 +35,7 @@ has detected a cable insertion; driven low otherwise. */ */ #define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ #define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) +#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) /* * SMC Ethernet definitions @@ -49,10 +49,10 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_ETH0 36 #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) #define GPIO_GUMSTIX_ETH1 27 #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) +#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) /* CF reset line */ @@ -63,18 +63,18 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO4_nSTSCHG GPIO4_nBVD1 #define GPIO11_nCD 11 #define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) +#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) /* CF slot 1 */ #define GPIO18_nBVD1 18 #define GPIO18_nSTSCHG GPIO18_nBVD1 #define GPIO36_nCD 36 #define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) +#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) /* CF GPIO line modes */ #define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 37408449ec2..8bc02913517 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -15,7 +15,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO +#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) #define HX4700_NR_IRQS (IRQ_BOARD_START + 70) diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 5eff96fcc94..22a96f87232 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -131,28 +131,26 @@ #define PCC_VS2 (1 << 1) #define PCC_VS1 (1 << 0) -#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) - /* A listing of interrupts used by external hardware devices */ -#define TOUCH_PANEL_IRQ IRQ_GPIO(5) -#define IDE_IRQ IRQ_GPIO(21) +#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5) +#define IDE_IRQ PXA_GPIO_TO_IRQ(21) #define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define ETHERNET_IRQ IRQ_GPIO(4) +#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4) #define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) +#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7) #define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) +#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8) #define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S0_RDYINT IRQ_GPIO(19) -#define PCMCIA_S1_RDYINT IRQ_GPIO(22) +#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19) +#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22) /* diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 7cc5a781e99..32975adf3ca 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -88,10 +88,8 @@ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) -#define PXA_GPIO_IRQ_NUM (192) - -#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) -#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) +#define PXA_NR_BUILTIN_GPIO (192) +#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) /* * The following interrupts are for board specific purposes. Since @@ -100,7 +98,7 @@ * By default, no board IRQ is reserved. It should be finished in * custom board since sparse IRQ is already enabled. */ -#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) +#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO) #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index b6238cbd8ae..8066be54e9f 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,13 +1,11 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio-pxa.h> - #define LITTLETON_ETH_PHYS 0x30000000 #define LITTLETON_GPIO_LCD_CS (17) -#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO) +#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x)) #define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 7cbfc5d3f9d..ba6a6e1d29e 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -78,7 +78,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index ae536e86d8e..2c447133657 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -68,10 +68,10 @@ /* 20, 53 and 86 are usb related too */ /* INTERRUPTS */ -#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) -#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) -#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) -#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) +#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 6baf7469d4e..0bd4f036c72 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -48,10 +48,10 @@ #define GPIO_NR_PALMT5_BT_RESET 83 /* INTERRUPTS */ -#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) -#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) -#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) -#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) +#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3f9dd3fd463..c383a21680b 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -52,8 +52,8 @@ #define GPIO_NR_PALMTC_IR_DISABLE 45 /* IRQs */ -#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N) -#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY) +#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N) +#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY) /* UCB1400 GPIOs */ #define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00) diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 7074a6ed46c..f2e53038025 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -62,10 +62,10 @@ #define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 /* INTERRUPTS */ -#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) -#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) -#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) -#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) +#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 4bac588478a..6bf28de228b 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -34,7 +34,7 @@ /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 -#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO) #define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define ADR_PCM027_RTC 0x51 /* I2C address */ @@ -43,21 +43,21 @@ /* Ethernet chip (SMSC91C111) */ #define PCM027_ETH_IRQ_GPIO 52 -#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO) #define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM027_ETH_PHYS PXA_CS5_PHYS #define PCM027_ETH_SIZE (1*1024*1024) /* CAN controller SJA1000 (unsupported yet) */ #define PCM027_CAN_IRQ_GPIO 114 -#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO) #define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_CAN_PHYS 0x22000000 #define PCM027_CAN_SIZE 0x100 /* SPI GPIO expander (unsupported yet) */ #define PCM027_EGPIO_IRQ_GPIO 27 -#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO) #define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_EGPIO_CS 24 /* diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 8a4383b776d..d72791695b2 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -28,14 +28,14 @@ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ #define PCM990_CTRL_INT_IRQ_GPIO 9 -#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO) #define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 -#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO) #define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* visible CPLD (U7) registers */ @@ -132,7 +132,7 @@ * IDE */ #define PCM990_IDE_IRQ_GPIO 13 -#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO) #define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_BASE 0xee000000 @@ -188,11 +188,11 @@ * Compact Flash */ #define PCM990_CF_IRQ_GPIO 11 -#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO) #define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_CD_GPIO 12 -#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO) #define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ @@ -258,14 +258,14 @@ * Wolfson AC97 Touch */ #define PCM990_AC97_IRQ_GPIO 10 -#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO) #define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* * MMC phyCORE */ #define PCM990_MMC0_IRQ_GPIO 9 -#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO) #define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING /* diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 83d1cfd00fc..f32ff75dcca 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -47,18 +47,18 @@ #define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ -#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) -#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) -#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) -#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) -#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) -#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) +#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0) +#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4) +#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16) +#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11) +#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10) +#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8) +#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13) /* SCOOP GPIOs */ #define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 @@ -71,7 +71,7 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) -#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0) #define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2) #define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7) diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 685749a51c4..0bfe6507c95 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -108,7 +108,7 @@ #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 -#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO) +#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) #define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) #define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) @@ -140,7 +140,7 @@ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) -#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) #define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1) #define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) @@ -152,7 +152,7 @@ #define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) /* Akita IO Expander GPIOs */ -#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) #define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) #define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) @@ -164,23 +164,23 @@ /* Spitz IRQ Definitions */ -#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) -#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) -#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) -#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) +#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT) +#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN) +#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT) +#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN) +#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT) +#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC) +#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY) +#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA) +#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB) +#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER) +#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT) +#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO) +#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ) +#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD) +#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ) +#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT) +#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT) /* * Shared data structures diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 1272c4b56ce..2bb0e862598 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -24,7 +24,7 @@ /* * SCOOP2 internal GPIOs */ -#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO +#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) @@ -42,7 +42,7 @@ /* * SCOOP2 jacket GPIOs */ -#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) @@ -59,7 +59,7 @@ /* * TC6393XB GPIOs */ -#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12) #define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) #define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) @@ -141,30 +141,30 @@ /* * Interrupts */ -#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) -#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) -#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) -#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) -#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) -#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) -#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) -#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) -#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) -#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) -#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) -#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) -#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) -#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) -#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) -#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) -#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) -#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) -#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) -#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) - -#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) +#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW) #define TOSA_KEY_SYNC KEY_102ND /* ??? */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index 903e1a2e664..d2ca01053f6 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -43,30 +43,30 @@ /* Ethernet Controller Davicom DM9000 */ #define GPIO_DM9000 101 -#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) +#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000) /* UCB1400 audio / TS-controller */ #define GPIO_UCB1400 1 -#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) +#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400) /* PCMCIA socket Compact Flash */ #define GPIO_PCD 11 /* PCMCIA Card Detect */ -#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) +#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD) #define GPIO_PRDY 13 /* READY / nINT */ -#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) +#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY) /* MMC socket */ #define GPIO_MMC_DET 12 -#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) +#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET) /* DOC NAND chip */ #define GPIO_DOC_LOCK 94 #define GPIO_DOC_IRQ 93 -#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ) +#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ) /* SPI interface */ #define GPIO_SPI 53 -#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI) +#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI) /* LEDS using tx2 / rx2 */ #define GPIO_SYS_BUSY_LED 46 @@ -74,7 +74,7 @@ /* Off-module PIC on ConXS board */ #define GPIO_PIC 0 -#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) +#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC) #ifdef CONFIG_MACH_TRIZEPS_CONXS /* for CONXS base board define these registers */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 532c5d3a97d..5dae15ea671 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -22,7 +22,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -92,44 +91,6 @@ static struct irq_chip pxa_internal_irq_chip = { .irq_unmask = pxa_unmask_irq, }; -/* - * GPIO IRQs for GPIO 0 and 1 - */ -static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - IRQ_GPIO0; - - if (__gpio_is_occupied(gpio)) { - pr_err("%s failed: GPIO is configured\n", __func__); - return -EINVAL; - } - - if (type & IRQ_TYPE_EDGE_RISING) - GRER0 |= GPIO_bit(gpio); - else - GRER0 &= ~GPIO_bit(gpio); - - if (type & IRQ_TYPE_EDGE_FALLING) - GFER0 |= GPIO_bit(gpio); - else - GFER0 &= ~GPIO_bit(gpio); - - return 0; -} - -static void pxa_ack_low_gpio(struct irq_data *d) -{ - GEDR0 = (1 << (d->irq - IRQ_GPIO0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .irq_ack = pxa_ack_low_gpio, - .irq_mask = pxa_mask_irq, - .irq_unmask = pxa_unmask_irq, - .irq_set_type = pxa_set_low_gpio_type, -}; - asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) { uint32_t icip, icmr, mask; @@ -160,26 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -static void __init pxa_init_low_gpio_irq(set_wake_t fn) -{ - int irq; - - /* clear edge detection on GPIO 0 and 1 */ - GFER0 &= ~0x3; - GRER0 &= ~0x3; - GEDR0 = 0x3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - irq_set_chip_and_handler(irq, &pxa_low_gpio_chip, - handle_edge_irq); - irq_set_chip_data(irq, irq_base(0)); - set_irq_flags(irq, IRQF_VALID); - } - - pxa_low_gpio_chip.irq_set_wake = fn; -} - -void __init pxa_init_irq(int irq_nr, set_wake_t fn) +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) { int irq, i, n; @@ -209,7 +151,6 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; - pxa_init_low_gpio_irq(fn); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index c337c7eed51..1fb86edb857 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -124,8 +124,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, } }; @@ -396,7 +396,7 @@ static struct i2c_board_info littleton_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &littleton_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)), }, [1] = { .type = "max7320", diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6119c015f39..cee9ce2fc0b 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -152,8 +152,8 @@ static void __init lpd270_init_irq(void) handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 4b7a5287165..6ebd276aebe 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -170,8 +170,8 @@ static void __init lubbock_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 4e6774fff42..3d6baf91396 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -184,8 +184,8 @@ static struct resource egpio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), - .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = { }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index ca14555d5e1..1aebaf71946 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -178,8 +178,8 @@ static void __init mainstone_init_irq(void) MST_INTMSKENA = 0; MST_INTSETCLR = 0; - irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 43a5f6861ca..f14775536b8 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +21,6 @@ #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -29,6 +29,10 @@ #define GAFR_L(x) __GAFR(0, x) #define GAFR_U(x) __GAFR(1, x) +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) +#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) + #define PWER_WE35 (1 << 24) struct gpio_desc { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dce71b4a3a5..e80a3db735c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -537,15 +537,15 @@ static struct pda_power_pdata power_pdata = { static struct resource power_resources[] = { [0] = { .name = "ac", - .start = gpio_to_irq(GPIO96_AC_DETECT), - .end = gpio_to_irq(GPIO96_AC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, [1] = { .name = "usb", - .start = gpio_to_irq(GPIO13_nUSB_DETECT), - .end = gpio_to_irq(GPIO13_nUSB_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 90928d6e1a5..83570a79e7d 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -417,8 +417,8 @@ static struct resource dm9k_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE } }; diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d38c6548b3..abab4e2b122 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -378,7 +378,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include <linux/i2c/pca953x.h> static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO, + .gpio_base = PXA_NR_BUILTIN_GPIO, }; static int gpio_bus_switch = -EINVAL; @@ -406,9 +406,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (gpio_bus_switch < 0) { - ret = gpio_request(NR_BUILTIN_GPIO, "camera"); + ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO; + gpio_bus_switch = PXA_NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b260ce872d2..69036e42ca3 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -166,8 +166,8 @@ static struct resource locomo_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(10), - .end = IRQ_GPIO(10), + .start = PXA_GPIO_TO_IRQ(10), + .end = PXA_GPIO_TO_IRQ(10), .flags = IORESOURCE_IRQ, }, }; @@ -212,7 +212,7 @@ static struct spi_board_info poodle_spi_devices[] = { .bus_num = 1, .platform_data = &poodle_ads7846_info, .controller_data= &poodle_ads7846_chip, - .irq = gpio_to_irq(POODLE_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT), }, }; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f05f9486b0c..adf058fa97e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -17,6 +17,7 @@ * need be. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -208,6 +209,8 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -287,7 +290,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) @@ -312,14 +315,12 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake); } #ifdef CONFIG_CPU_PXA26x void __init pxa26x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake); } #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index bc5a98ebaa7..180bd8675d4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -229,6 +230,8 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM @@ -355,7 +358,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) @@ -386,7 +389,6 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake); } static struct map_desc pxa27x_io_desc[] __initdata = { @@ -422,6 +424,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 40bb16501d8..0388eda7878 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,6 +89,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 8d614ecd8e9..d487e1ff4c9 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,6 +83,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 0737c59b88a..f107c71c758 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -56,6 +55,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); +static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0); static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops); @@ -67,6 +67,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), @@ -88,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -365,7 +367,8 @@ static struct irq_chip pxa_ext_wakeup_chip = { .irq_set_type = pxa_set_ext_wakeup_type, }; -static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) +static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *, + unsigned int)) { int irq; @@ -388,7 +391,6 @@ void __init pxa3xx_init_irq(void) pxa_init_irq(56, pxa3xx_set_wake); pxa_init_ext_wakeup_irq(pxa3xx_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } static struct map_desc pxa3xx_io_desc[] __initdata = { @@ -417,6 +419,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 51371b39d2a..fccc644702e 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -20,7 +20,6 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> @@ -212,11 +211,13 @@ static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); +static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), @@ -230,12 +231,12 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), + INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), }; void __init pxa95x_init_irq(void) { pxa_init_irq(96, NULL); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } /* @@ -248,6 +249,7 @@ void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &sa1100_device_rtc, &pxa_device_rtc, &pxa27x_device_ssp1, diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 4962b167662..22818c7694a 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO_ETH_IRQ), - .end = gpio_to_irq(GPIO_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -672,7 +672,7 @@ static struct lis3lv02d_platform_data lis3_pdata = { .chip_select = 1, \ .controller_data = (void *) GPIO_ACCEL_CS, \ .platform_data = &lis3_pdata, \ - .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ + .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ } #define SPI_DAC7512 \ @@ -956,7 +956,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = { static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = gpio_to_irq(GPIO_TOUCH_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 878707056e6..0fe354efb93 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &saar_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index b6dbaca460c..febc809ed5a 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -92,7 +92,7 @@ static struct i2c_board_info saarb_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &saarb_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 785880f67b6..8d5168d253a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -907,24 +907,24 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev) gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock); /* Register interrupt handlers */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin)); } - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock)); } if (sharpsl_pm.machinfo->gpio_fatal) { - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal)); } } if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull)); } } @@ -953,14 +953,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev) led_trigger_unregister_simple(sharpsl_charge_led_trigger); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->gpio_fatal) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->batfull_irq) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); gpio_free(sharpsl_pm.machinfo->gpio_batlock); gpio_free(sharpsl_pm.machinfo->gpio_batfull); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index a7f81a3fd13..abf355d0c92 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -552,7 +552,7 @@ static struct spi_board_info spitz_spi_devices[] = { .chip_select = 0, .platform_data = &spitz_ads7846_info, .controller_data = &spitz_ads7846_chip, - .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 094279aefe9..34cbdac5152 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -41,6 +42,7 @@ static int spitz_last_ac_status; static struct gpio spitz_charger_gpios[] = { { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, @@ -169,14 +171,19 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { - return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); + unsigned long ret; + ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + << GPIO_bit(SPITZ_GPIO_KEY_INT)) + | (!gpio_get_value(SPITZ_GPIO_SYNC) + << GPIO_bit(SPITZ_GPIO_SYNC)); + return ret; } unsigned long spitzpm_read_devdata(int type) { switch (type) { case SHARPSL_STATUS_ACIN: - return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + return !gpio_get_value(SPITZ_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 80d7f23ad0f..d8a2467de92 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -376,7 +376,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .controller_data = &staccel_chip_info, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { .modalias = "cc2420", .max_speed_hz = 6500000, @@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &imote2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -560,18 +560,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { /* IMB400 Multimedia board */ .type = "wm8940", .addr = 0x1A, @@ -661,8 +661,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(40), - .end = IRQ_GPIO(40), + .start = PXA_GPIO_TO_IRQ(40), + .end = PXA_GPIO_TO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -707,7 +707,7 @@ static int stargate2_mci_init(struct device *dev, } gpio_direction_input(SG2_GPIO_nSD_DETECT); - err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), + err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), stargate2_detect_int, IRQ_TYPE_EDGE_BOTH, "MMC card detect", @@ -738,7 +738,7 @@ static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) static void stargate2_mci_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data); + free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data); gpio_free(SG2_SD_POWER_ENABLE); gpio_free(SG2_GPIO_nSD_DETECT); } @@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &stargate2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -938,18 +938,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, }; diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 4fa36a3e383..9fb38e80e07 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 8a22879f0bb..f7d9305cfd7 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &evb3_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index dfe40f8705a..7ce5c436cc4 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = { static struct resource tosa_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(TOSA_GPIO_AC_IN), - .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), + .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index afe2b749552..023d6ca789d 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(VIPER_ETH_GPIO), - .end = gpio_to_irq(VIPER_ETH_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, [2] = { @@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* External UARTs */ { .mapbase = VIPER_UARTA_PHYS, - .irq = gpio_to_irq(VIPER_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .mapbase = VIPER_UARTB_PHYS, - .irq = gpio_to_irq(VIPER_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(VIPER_USB_GPIO), - .end = gpio_to_irq(VIPER_USB_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index fed5fb08871..1f5cfa96f6d 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -395,8 +395,8 @@ static struct resource vpac270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), - .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -433,7 +433,7 @@ static pxa2xx_audio_ops_t vpac270_ac97_pdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ), }; static struct platform_device vpac270_ucb1400_device = { @@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = { .flags = IORESOURCE_DMA }, [3] = { /* IDE IRQ pin */ - .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), - .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), .flags = IORESOURCE_IRQ } }; diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index d75f66ab8c3..b6476848b56 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .modalias = "libertas_spi", .platform_data = &z2_lbs_pdata, .controller_data = &z2_lbs_chip_info, - .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ), .max_speed_hz = 13000000, .bus_num = 1, .chip_select = 0, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 9db35a7fcfc..a4dd1c34705 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -233,7 +233,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */ { /* COM1 */ .mapbase = 0x10000000, - .irq = gpio_to_irq(ZEUS_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -242,7 +242,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM2 */ .mapbase = 0x10800000, - .irq = gpio_to_irq(ZEUS_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -251,7 +251,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM3 */ .mapbase = 0x11000000, - .irq = gpio_to_irq(ZEUS_UARTC_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -260,7 +260,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM4 */ .mapbase = 0x11800000, - .irq = gpio_to_irq(ZEUS_UARTD_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -321,8 +321,8 @@ static struct resource zeus_dm9k0_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(ZEUS_ETH0_GPIO), - .end = gpio_to_irq(ZEUS_ETH0_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -339,8 +339,8 @@ static struct resource zeus_dm9k1_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(ZEUS_ETH1_GPIO), - .end = gpio_to_irq(ZEUS_ETH1_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -423,7 +423,7 @@ static struct spi_board_info zeus_spi_board_info[] = { [0] = { .modalias = "mcp2515", .platform_data = &zeus_mcp2515_pdata, - .irq = gpio_to_irq(ZEUS_CAN_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), .max_speed_hz = 1*1000*1000, .bus_num = 3, .mode = SPI_MODE_0, @@ -753,7 +753,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = { { I2C_BOARD_INFO("pca9535", 0x20), .platform_data = &zeus_pca953x_pdata[2], - .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO), }, { I2C_BOARD_INFO("lm75a", 0x48) }, { I2C_BOARD_INFO("24c01", 0x50) }, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 7678b1bf790..98eec80623e 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -408,8 +408,8 @@ static void __init zylonite_init(void) * Note: We depend that the bootloader set * the correct value to MSC register for SMC91x. */ - smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); - smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq); + smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq); platform_device_register(&smc91x_device); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 93c64d8d7de..86e59c043de 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -231,12 +231,12 @@ static struct i2c_board_info zylonite_i2c_board_info[] = { .type = "pca9539", .addr = 0x74, .platform_data = &gpio_exp[0], - .irq = IRQ_GPIO(18), + .irq = PXA_GPIO_TO_IRQ(18), }, { .type = "pca9539", .addr = 0x75, .platform_data = &gpio_exp[1], - .irq = IRQ_GPIO(19), + .irq = PXA_GPIO_TO_IRQ(19), }, }; |