Merge branch 'for-rmk' of git://git.marvell.com/orion into devel

9 files changed, 41 insertions, 24 deletions

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 92ba16e1b6f..7db966dc29c 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO,				/* pcap interrupt */
-	GPIO4_GPIO,				/* WDI_AP */
-	GPIO55_GPIO,				/* SYS_RESTART */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO12_GPIO,
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO48_GPIO,				/* RESET */
 	GPIO28_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO57_GPIO,				/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
-	GPIO82_GPIO,				/* RESET */
-	GPIO99_GPIO,				/* TC_MM_EN */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
 
 	/* sound */
 	GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
 	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO15_GPIO,
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* EOC */
-	GPIO10_GPIO,
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
 	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO37_GPIO,				/* RESET */
 	GPIO57_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO96_GPIO,				/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO116_GPIO,				/* RESET */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
 	GPIO41_GPIO,				/* BP_FLASH */
 
 	/* sound */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 31e6a7b6ad8..b6c10556fbc 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
 /**
  * init_gpio_reset() - register GPIO as reset generator
  * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
  */
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
 
 #endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 7ffb91d64c3..cf6b720c055 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
@@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_pgsr[i] = PGSR(i);
 
 		GPDR(i * 32) = gpdr_lpm[i];
 	}
@@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
 		GPDR(i * 32) = saved_gpdr[i];
+		PGSR(i) = saved_pgsr[i];
 	}
 	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
@@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
 	if (cpu_is_pxa27x())
 		pxa27x_mfp_init();
 
+	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+	PSSR = PSSR_RDH;
+
 	/* initialize gafr_run[], pgsr_lpm[] from existing values */
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 24a967e1e14..2e65f05d366 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO108_GPIO,	/* ir disable */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 30662363907..05bf979b78a 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e2d44b1a8a9..e99a893c58a 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index df29d45fb4e..01e9d643394 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
 {
 	int rc;
 
@@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
 	}
 
 	if (output)
-		rc = gpio_direction_output(gpio, 0);
+		rc = gpio_direction_output(gpio, level);
 	else
 		rc = gpio_direction_input(gpio);
 	if (rc) {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c18e34acafc..5a45fe340a1 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
+static void spitz_ohci_exit(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.exit		= spitz_ohci_exit,
 	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
@@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index afac5b6d3d7..a0bd46ef5d3 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -897,7 +897,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;