Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h

79 files changed, 1921 insertions, 1101 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index c98d81ff250..2fc9f94cdd2 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -50,6 +50,10 @@ config MACH_SAAR
 	select PXA3xx
 	select CPU_PXA930
 
+config MACH_SAARB
+	bool "PXA955 Handheld Platform (aka SAARB)"
+	select CPU_PXA955
+
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
 config ARCH_PXA_IDP
@@ -233,10 +237,6 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
-config MACH_COLIBRI_PXA270_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
-	depends on MACH_COLIBRI
-
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
@@ -254,6 +254,10 @@ config MACH_COLIBRI320
 	select PXA3xx
 	select CPU_PXA320
 
+config MACH_COLIBRI_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
 config MACH_VPAC270
 	bool "Voipac PXA270"
 	select PXA27x
@@ -653,11 +657,17 @@ config CPU_PXA935
 	help
 	  PXA935 (codename Tavor-P65)
 
-config CPU_PXA950
+config PXA95x
 	bool
-	select CPU_PXA930
+	select CPU_PJ4
+	help
+	  Select code specific to PXA95x variants
+
+config CPU_PXA955
+	bool
+	select PXA95x
 	help
-	  PXA950 (codename Tavor-PV2)
+	  PXA950 (codename MG1)
 
 config PXA_SHARP_C7xx
 	bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e2f89c2c6f4..cc39d17b2e0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -16,9 +16,10 @@ endif
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -34,6 +35,7 @@ obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
+obj-$(CONFIG_MACH_SAARB)	+= saarb.o
 
 # 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
@@ -60,7 +62,7 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
 obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 21e18890193..ccb2d0cebcc 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -567,27 +567,29 @@ static inline void balloon3_i2c_init(void) {}
  * NAND
  ******************************************************************************/
 #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static uint16_t balloon3_ctl =
-	BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-	BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-	BALLOON3_NAND_CONTROL_FLWP;
-
 static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtd->priv;
+	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_CLE)
-			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
 		else
-			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
 
 		if (ctrl & NAND_ALE)
-			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
 		else
-			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
-
-		__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
+
+		if (balloon3_ctl_clr)
+			__raw_writel(balloon3_ctl_clr,
+				BALLOON3_NAND_CONTROL_REG);
+		if (balloon3_ctl_set)
+			__raw_writel(balloon3_ctl_set,
+				BALLOON3_NAND_CONTROL_REG |
+				BALLOON3_FPGA_SETnCLR);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -599,28 +601,33 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
 	if (chip < 0 || chip > 3)
 		return;
 
-	balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
-			BALLOON3_NAND_CONTROL_FLCE1 |
-			BALLOON3_NAND_CONTROL_FLCE2 |
-			BALLOON3_NAND_CONTROL_FLCE3;
+	/* Assert all nCE lines */
+	__raw_writew(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+		BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
 
 	/* Deassert correct nCE line */
-	balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+		BALLOON3_NAND_CONTROL_REG);
+}
 
-	__raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
 }
 
 static int balloon3_nand_probe(struct platform_device *pdev)
 {
-	void __iomem *temp_map;
 	uint16_t ver;
 	int ret;
 
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+		BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
 
 	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver > 0x0201)
-		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+	if (ver < 0x4f08)
+		pr_warn("The FPGA code, version 0x%04x, is too old. "
 			"NAND support might be broken in this version!", ver);
 
 	/* Power up the NAND chips */
@@ -635,7 +642,11 @@ static int balloon3_nand_probe(struct platform_device *pdev)
 	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
 
 	/* Deassert all nCE lines and write protect line */
-	__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+	__raw_writel(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+		BALLOON3_NAND_CONTROL_FLWP,
+		BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
 	return 0;
 
 err2:
@@ -677,7 +688,7 @@ struct platform_nand_data balloon3_nand_pdata = {
 	},
 	.ctrl = {
 		.hwcontrol	= 0,
-		.dev_ready	= 0,
+		.dev_ready	= balloon3_nand_dev_ready,
 		.select_chip	= balloon3_nand_select_chip,
 		.cmd_ctrl	= balloon3_nand_cmd_ctl,
 		.probe		= balloon3_nand_probe,
@@ -802,7 +813,7 @@ static struct map_desc balloon3_io_desc[] __initdata = {
 
 static void __init balloon3_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4bd7a3cda48..4284513f396 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -149,7 +149,7 @@ static void __init capc7117_init(void)
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = capc7117_init
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
new file mode 100644
index 00000000000..1ce09044849
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <mach/pxa2xx-regs.h>
+
+#include "clock.h"
+
+void clk_pxa2xx_cken_enable(struct clk *clk)
+{
+	CKEN |= 1 << clk->cken;
+}
+
+void clk_pxa2xx_cken_disable(struct clk *clk)
+{
+	CKEN &= ~(1 << clk->cken);
+}
+
+const struct clkops clk_pxa2xx_cken_ops = {
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t saved_cken;
+
+static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+	saved_cken = CKEN;
+	return 0;
+}
+
+static int pxa2xx_clock_resume(struct sys_device *d)
+{
+	CKEN = saved_cken;
+	return 0;
+}
+#else
+#define pxa2xx_clock_suspend	NULL
+#define pxa2xx_clock_resume	NULL
+#endif
+
+struct sysdev_class pxa2xx_clock_sysclass = {
+	.name		= "pxa2xx-clock",
+	.suspend	= pxa2xx_clock_suspend,
+	.resume		= pxa2xx_clock_resume,
+};
+
+static int __init pxa2xx_clock_init(void)
+{
+	if (cpu_is_pxa2xx())
+		return sysdev_class_register(&pxa2xx_clock_sysclass);
+	return 0;
+}
+postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
new file mode 100644
index 00000000000..1b08a34ab23
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa3xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK	13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK		60000000
+
+#define ACCR_D0CS	(1 << 26)
+#define ACCR_PCCE	(1 << 11)
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+	unsigned long acsr, xclkcfg;
+	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	acsr = ACSR;
+
+	xl  = acsr & 0x1f;
+	xn  = (acsr >> 8) & 0x7;
+	hss = (acsr >> 14) & 0x3;
+
+	XL = xl * BASE_CLK;
+	XN = xn * XL;
+
+	ro = acsr & ACCR_D0CS;
+
+	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	if (info) {
+		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+			(ro) ? "" : "in");
+		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+			XL / 1000000, (XL % 1000000) / 10000, xl);
+		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+			XN / 1000000, (XN % 1000000) / 10000, xn,
+			(t) ? "" : "in");
+		pr_info("HSIO bus clock: %d.%02dMHz\n",
+			HSS / 1000000, (HSS % 1000000) / 10000);
+	}
+
+	return CLK / 1000;
+}
+
+/*
+ * Return the current AC97 clock frequency.
+ */
+static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
+{
+	unsigned long rate = 312000000;
+	unsigned long ac97_div;
+
+	ac97_div = AC97_DIV;
+
+	/* This may loose precision for some rates but won't for the
+	 * standard 24.576MHz.
+	 */
+	rate /= (ac97_div >> 12) & 0x7fff;
+	rate *= (ac97_div & 0xfff);
+
+	return rate;
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+	unsigned long acsr;
+	unsigned int hss, hsio_clk;
+
+	acsr = ACSR;
+
+	hss = (acsr >> 14) & 0x3;
+	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	return hsio_clk;
+}
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
+
+static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
+{
+	unsigned long acsr = ACSR;
+	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+	unsigned int smcfs = (acsr >> 23) & 0x7;
+
+	return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
+			df_clkdiv[(memclkcfg >> 16) & 0x3];
+}
+
+void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	if (clk->cken < 32)
+		CKENA |= mask;
+	else
+		CKENB |= mask;
+}
+
+void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	if (clk->cken < 32)
+		CKENA &= ~mask;
+	else
+		CKENB &= ~mask;
+}
+
+const struct clkops clk_pxa3xx_cken_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+};
+
+const struct clkops clk_pxa3xx_hsio_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_hsio_getrate,
+};
+
+const struct clkops clk_pxa3xx_ac97_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_ac97_getrate,
+};
+
+const struct clkops clk_pxa3xx_smemc_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_smemc_getrate,
+};
+
+static void clk_pout_enable(struct clk *clk)
+{
+	OSCC |= OSCC_PEN;
+}
+
+static void clk_pout_disable(struct clk *clk)
+{
+	OSCC &= ~OSCC_PEN;
+}
+
+const struct clkops clk_pxa3xx_pout_ops = {
+	.enable		= clk_pout_enable,
+	.disable	= clk_pout_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t cken[2];
+static uint32_t accr;
+
+static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+	cken[0] = CKENA;
+	cken[1] = CKENB;
+	accr = ACCR;
+	return 0;
+}
+
+static int pxa3xx_clock_resume(struct sys_device *d)
+{
+	ACCR = accr;
+	CKENA = cken[0];
+	CKENB = cken[1];
+	return 0;
+}
+#else
+#define pxa3xx_clock_suspend	NULL
+#define pxa3xx_clock_resume	NULL
+#endif
+
+struct sysdev_class pxa3xx_clock_sysclass = {
+	.name		= "pxa3xx-clock",
+	.suspend	= pxa3xx_clock_suspend,
+	.resume		= pxa3xx_clock_resume,
+};
+
+static int __init pxa3xx_clock_init(void)
+{
+	if (cpu_is_pxa3xx() || cpu_is_pxa95x())
+		return sysdev_class_register(&pxa3xx_clock_sysclass);
+	return 0;
+}
+postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 4e4a84be96b..d5152220ce9 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -3,21 +3,11 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/clkdev.h>
 
-#include <mach/pxa2xx-regs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-#include "generic.h"
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clocks_lock);
@@ -63,18 +53,19 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-
-void clk_cken_enable(struct clk *clk)
+void clk_dummy_enable(struct clk *clk)
 {
-	CKEN |= 1 << clk->cken;
 }
 
-void clk_cken_disable(struct clk *clk)
+void clk_dummy_disable(struct clk *clk)
 {
-	CKEN &= ~(1 << clk->cken);
 }
 
-const struct clkops clk_cken_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
+const struct clkops clk_dummy_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+};
+
+struct clk clk_dummy = {
+	.ops		= &clk_dummy_ops,
 };
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 12cc0e87e6c..f9f349a21b5 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,4 +1,5 @@
 #include <linux/clkdev.h>
+#include <linux/sysdev.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
@@ -14,6 +15,12 @@ struct clk {
 	unsigned int		enabled;
 };
 
+void clk_dummy_enable(struct clk *);
+void clk_dummy_disable(struct clk *);
+
+extern const struct clkops clk_dummy_ops;
+extern struct clk clk_dummy;
+
 #define INIT_CLKREG(_clk,_devname,_conname)		\
 	{						\
 		.clk		= _clk,			\
@@ -21,14 +28,6 @@ struct clk {
 		.con_id		= _conname,		\
 	}
 
-#define DEFINE_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
 #define DEFINE_CK(_name, _cken, _ops)			\
 struct clk clk_##_name = {				\
 		.ops	= _ops,				\
@@ -42,28 +41,38 @@ struct clk clk_##_name = {				\
 		.delay	= _delay,			\
 	}
 
-extern const struct clkops clk_cken_ops;
-
-void clk_cken_enable(struct clk *clk);
-void clk_cken_disable(struct clk *clk);
-
-#ifdef CONFIG_PXA3xx
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
+#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
+		.ops	= &clk_pxa2xx_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define DEFINE_PXA3_CK(_name, _cken, _ops)		\
+extern const struct clkops clk_pxa2xx_cken_ops;
+
+void clk_pxa2xx_cken_enable(struct clk *clk);
+void clk_pxa2xx_cken_disable(struct clk *clk);
+
+extern struct sysdev_class pxa2xx_clock_sysclass;
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
-		.ops	= _ops,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
 	}
 
 extern const struct clkops clk_pxa3xx_cken_ops;
+extern const struct clkops clk_pxa3xx_hsio_ops;
+extern const struct clkops clk_pxa3xx_ac97_ops;
+extern const struct clkops clk_pxa3xx_pout_ops;
+extern const struct clkops clk_pxa3xx_smemc_ops;
+
 extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
-#endif
 
+extern struct sysdev_class pxa3xx_clock_sysclass;
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d34b99febeb..b734d846816 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,6 +24,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
+#include <mach/smemc.h>
 
 #include <asm/hardware/it8152.h>
 
@@ -392,9 +393,9 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 	cmx2xx_pci_suspend();
 
 	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
+	sleep_save_msc[0] = __raw_readl(MSC0);
+	sleep_save_msc[1] = __raw_readl(MSC1);
+	sleep_save_msc[2] = __raw_readl(MSC2);
 
 	/* setup power saving mode registers */
 	PCFR = 0x0;
@@ -416,9 +417,9 @@ static int cmx2xx_resume(struct sys_device *dev)
 	cmx2xx_pci_resume();
 
 	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
+	__raw_writel(sleep_save_msc[0], MSC0);
+	__raw_writel(sleep_save_msc[1], MSC1);
+	__raw_writel(sleep_save_msc[2], MSC2);
 
 	return 0;
 }
@@ -498,7 +499,12 @@ static struct map_desc cmx2xx_io_desc[] __initdata = {
 
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	if (cpu_is_pxa25x())
+		pxa25x_map_io();
+
+	if (cpu_is_pxa27x())
+		pxa27x_map_io();
+
 	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
 
 	it8152_base_address = CMX2XX_IT8152_VIRT;
@@ -506,7 +512,11 @@ static void __init cmx2xx_map_io(void)
 #else
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	if (cpu_is_pxa25x())
+		pxa25x_map_io();
+
+	if (cpu_is_pxa27x())
+		pxa27x_map_io();
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 922b1075b9d..7984268508b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -857,7 +857,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 
 MACHINE_START(CM_X300, "CM-X300 module")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 0f3b632c3b1..6b2c800a113 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -1,7 +1,7 @@
 /*
- *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *  linux/arch/arm/mach-pxa/colibri-evalboard.c
  *
- *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Support for Toradex Colibri Evaluation Carrier Board
  *  Daniel Mack <daniel@caiaq.de>
  *  Marek Vasut <marek.vasut@gmail.com>
  *
@@ -19,6 +19,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
+#include <linux/i2c.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
@@ -26,86 +27,95 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 
+#include <plat/i2c.h>
+
 #include "generic.h"
 #include "devices.h"
 
 /******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-};
-
-/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+static struct pxamci_platform_data colibri_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
 	.gpio_card_ro		= -1,
 	.detect_delay_ms	= 200,
 };
 
-static void __init colibri_pxa270_mmc_init(void)
+static void __init colibri_mmc_init(void)
 {
-	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+	if (machine_is_colibri())	/* PXA270 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO0_COLIBRI_PXA270_SD_DETECT;
+	if (machine_is_colibri300())	/* PXA300 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO39_COLIBRI_PXA300_SD_DETECT;
+	else				/* PXA320 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+	pxa_set_mci_info(&colibri_mci_platform_data);
 }
 #else
-static inline void colibri_pxa270_mmc_init(void) {}
+static inline void colibri_mmc_init(void) {}
 #endif
 
 /******************************************************************************
  * USB Host
  ******************************************************************************/
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
+static int colibri_ohci_init(struct device *dev)
 {
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 	return 0;
 }
 
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+static struct pxaohci_platform_data colibri_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+	.flags		= ENABLE_PORT1 |
 			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_pxa270_ohci_init,
+	.init		= colibri_ohci_init,
 };
 
-static void __init colibri_pxa270_uhc_init(void)
+static void __init colibri_uhc_init(void)
 {
-	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+	/* Colibri PXA270 has two usb ports, TBA for 320 */
+	if (machine_is_colibri())
+		colibri_ohci_info.flags	|= ENABLE_PORT2;
+
+	pxa_set_ohci_info(&colibri_ohci_info);
 }
 #else
-static inline void colibri_pxa270_uhc_init(void) {}
+static inline void colibri_uhc_init(void) {}
 #endif
 
-void __init colibri_pxa270_evalboard_init(void)
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("m41t00", 0x68),
+	},
+};
+
+static void __init colibri_rtc_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
 {
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	colibri_pxa270_mmc_init();
-	colibri_pxa270_uhc_init();
+	colibri_mmc_init();
+	colibri_uhc_init();
+	colibri_rtc_init();
 }
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 37f0f3ed7c6..07b62a096f1 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -46,52 +46,6 @@
 #define GPIO113_INCOME_TS_IRQ   (113)
 
 /******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-
-/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
@@ -257,7 +211,6 @@ static inline void income_pwm_init(void) {}
 
 void __init colibri_pxa270_income_boardinit(void)
 {
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index bc045100ec1..6fc5d328ba7 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -33,6 +33,103 @@
 #include "generic.h"
 
 /******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	/* PCMCIA */
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO53_GPIO,	/* RESET */
+	GPIO83_GPIO,	/* BVD1 */
+	GPIO82_GPIO,	/* BVD2 */
+	GPIO1_GPIO,	/* READY */
+	GPIO84_GPIO,	/* DETECT */
+	GPIO107_GPIO,	/* PPEN */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
  * Pin configuration
  ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
@@ -184,10 +281,13 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_tsc_init();
 
 	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_PXA270_EVALBOARD:
-		colibri_pxa270_evalboard_init();
+	case COLIBRI_EVALBOARD:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(
+			colibri_pxa270_evalboard_pin_config));
+		colibri_evalboard_init();
 		break;
 	case COLIBRI_PXA270_INCOME:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
 		colibri_pxa270_income_boardinit();
 		break;
 	default:
@@ -209,7 +309,7 @@ static void __init colibri_pxa270_income_init(void)
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -217,7 +317,7 @@ MACHINE_END
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.boot_params	= 0xa0000100,
 	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a70b256591e..fddb16d07eb 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -31,9 +31,38 @@
 #include "generic.h"
 #include "devices.h"
 
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO39_GPIO,	/* SD detect */
+
+	/* UHC */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+
+	/* I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
 #if defined(CONFIG_AX88796)
 #define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-
 /*
  * Asix AX88796 Ethernet
  */
@@ -80,35 +109,6 @@ static void __init colibri_pxa300_init_eth(void)
 static inline void __init colibri_pxa300_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
-	.port_mode	= PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa300_init_ohci(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
-	pxa_set_ohci_info(&colibri_pxa300_ohci_info);
-}
-#else
-static inline void colibri_pxa300_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-};
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
 	GPIO54_LCD_LDD_0,
@@ -171,24 +171,21 @@ static inline void colibri_pxa310_init_ac97(void) {}
 
 void __init colibri_pxa300_init(void)
 {
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
 	colibri_pxa300_init_eth();
-	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
-	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
-				mfp_to_gpio(MFP_PIN_GPIO13));
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ca5f29e2e9c..ff9ff5f4fc4 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,9 +35,72 @@
 #include "generic.h"
 #include "devices.h"
 
+#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO28_GPIO,	/* SD detect */
+
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+
+	/* UHC */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* PCMCIA */
+	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
+	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
+	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
+	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
+	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
+	GPIO27_GPIO,		/* RDnWR ; input/tristate */
+	GPIO50_GPIO,		/* PREG ; input/tristate */
+	GPIO2_RDY,
+	GPIO5_NPIOR,
+	GPIO6_NPIOW,
+	GPIO7_NPIOS16,
+	GPIO8_NPWAIT,
+	GPIO29_GPIO,		/* PRDY (READY GPIO) */
+	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
+	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
+	GPIO77_GPIO,		/* PRST (RESET GPIO) */
+	GPIO53_GPIO,		/* PBVD1 */
+	GPIO79_GPIO,		/* PBVD2 */
+	GPIO54_GPIO,		/* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
 #if defined(CONFIG_AX88796)
 #define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-
 /*
  * Asix AX88796 Ethernet
  */
@@ -84,26 +147,6 @@ static void __init colibri_pxa320_init_eth(void)
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
-	.port_mode	= PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa320_init_ohci(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
-	pxa_set_ohci_info(&colibri_pxa320_ohci_info);
-}
-#else
-static inline void colibri_pxa320_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
 #if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
@@ -140,15 +183,6 @@ static void __init colibri_pxa320_init_udc(void)
 static inline void colibri_pxa320_init_udc(void) {}
 #endif
 
-static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3
-};
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
 	GPIO6_2_LCD_LDD_0,
@@ -205,59 +239,24 @@ static inline void __init colibri_pxa320_init_ac97(void)
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
-/*
- * The following configuration is verified to work with the Toradex Orchid
- * carrier board
- */
-static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-};
-
-static void __init colibri_pxa320_init_uart(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
-}
-
 void __init colibri_pxa320_init(void)
 {
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
 	colibri_pxa320_init_eth();
-	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
-	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
-				mfp_to_gpio(MFP_PIN_GPIO28));
-	colibri_pxa320_init_uart();
 	colibri_pxa320_init_udc();
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 199afa2ae30..96b2d9fbfef 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -64,55 +64,6 @@ void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
 }
 #endif
 
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int mmc_detect_pin;
-
-static int colibri_pxa3xx_mci_init(struct device *dev,
-				   irq_handler_t colibri_mmc_detect_int,
-				   void *data)
-{
-	int ret;
-
-	ret = gpio_request(mmc_detect_pin, "mmc card detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(mmc_detect_pin);
-	ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (ret) {
-		gpio_free(mmc_detect_pin);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
-{
-	free_irq(mmc_detect_pin, data);
-	gpio_free(gpio_to_irq(mmc_detect_pin));
-}
-
-static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init			= colibri_pxa3xx_mci_init,
-	.exit			= colibri_pxa3xx_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
-{
-	pxa3xx_mfp_config(pins, len);
-	mmc_detect_pin = detect_pin;
-	pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
-}
-#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static int lcd_bl_pin;
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 821229acabe..9f3e5af0a0d 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -721,7 +721,7 @@ static void __init fixup_corgi(struct machine_desc *desc,
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -731,7 +731,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_SHEPHERD
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -741,7 +741,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_HUSKY
 MACHINE_START(HUSKY, "SHARP Husky")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 58093d9e07b..6a7aeab42f6 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -38,8 +38,10 @@
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/io.h>
 
 #include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
@@ -242,7 +244,7 @@ static void pxa27x_guess_max_freq(void)
 
 static void init_sdram_rows(void)
 {
-	uint32_t mdcnfg = MDCNFG;
+	uint32_t mdcnfg = __raw_readl(MDCNFG);
 	unsigned int drac2 = 0, drac0 = 0;
 
 	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 * we need to preset the smaller DRI before the change.	 If we're
 	 * speeding up we need to set the larger DRI value after the change.
 	 */
-	preset_mdrefr = postset_mdrefr = MDREFR;
-	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
 		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
 		preset_mdrefr |= mdrefr_dri(new_freq_mem);
 	}
@@ -370,7 +372,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 3:		nop							\n\
 	  "
 		     : "=&r" (unused)
-		     : "r" (&MDREFR), "r" (cclkcfg),
+		     : "r" (MDREFR), "r" (cclkcfg),
 		       "r" (preset_mdrefr), "r" (postset_mdrefr)
 		     : "r4", "r5");
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 57cacaff194..a305424a967 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -27,6 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -255,9 +256,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init csb726_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/*	MSC2 = 0x06697ff4; *//* none/SM501 */
-	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
@@ -273,7 +274,7 @@ static void __init csb726_init(void)
 
 MACHINE_START(CSB726, "Cogent CSB726")
 	.boot_params	= 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index aaa1166df96..022c2fa4af0 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -342,27 +342,6 @@ struct platform_device pxa27x_device_i2c_power = {
 };
 #endif
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-#endif
-
 static struct resource pxai2s_resources[] = {
 	{
 		.start	= 0x40400000,
@@ -633,30 +612,35 @@ struct platform_device pxa25x_device_assp = {
 #endif /* CONFIG_PXA25x */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-static struct resource pxa27x_resource_keypad[] = {
+static struct resource pxa27x_resource_camera[] = {
 	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
+		.start	= 0x50000000,
+		.end	= 0x50000fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
+		.start	= IRQ_CAMERA,
+		.end	= IRQ_CAMERA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+	.name		= "pxa27x-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask      		= &pxa27x_dma_mask_camera,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
+	.resource	= pxa27x_resource_camera,
 };
 
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
 {
-	pxa_register_device(&pxa27x_device_keypad, info);
+	pxa_register_device(&pxa27x_device_camera, info);
 }
 
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -689,6 +673,33 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 {
 	pxa_register_device(&pxa27x_device_ohci, info);
 }
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa27x_resource_keypad[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150004c,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_keypad = {
+	.name		= "pxa27x-keypad",
+	.id		= -1,
+	.resource	= pxa27x_resource_keypad,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_keypad, info);
+}
 
 static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
 
@@ -833,79 +844,9 @@ struct platform_device pxa27x_device_pwm1 = {
 	.resource	= pxa27x_resource_pwm1,
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
 };
-
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
 
 #ifdef CONFIG_PXA3xx
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	/* PXA3xx SSP is basically equivalent to PXA27x */
-	.name		= "pxa27x-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-
 static struct resource pxa3xx_resources_mci2[] = {
 	[0] = {
 		.start	= 0x42000000,
@@ -984,6 +925,54 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa3xx_resources_i2c_power[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa3xx-pwri2c",
+	.id		= 1,
+	.resource	= pxa3xx_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
 static struct resource pxa3xx_resources_nand[] = {
 	[0] = {
 		.start	= 0x43100000,
@@ -1027,33 +1016,45 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
 
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+	[0] = {
+		.start	= 0x41a00000,
+		.end	= 0x41a0003f,
 		.flags	= IORESOURCE_MEM,
 	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
+	[1] = {
+		.start	= IRQ_SSP4,
+		.end	= IRQ_SSP4,
 		.flags	= IORESOURCE_IRQ,
 	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
+struct platform_device pxa3xx_device_ssp4 = {
+	/* PXA3xx SSP is basically equivalent to PXA27x */
+	.name		= "pxa27x-ssp",
+	.id		= 3,
 	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &pxa3xx_ssp4_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.resource	= pxa3xx_resource_ssp4,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
 };
-
-#endif /* CONFIG_PXA3xx */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index ed0dbfdb22e..4cefd1d18af 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1300,7 +1300,7 @@ static void __init em_x270_init(void)
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
@@ -1308,7 +1308,7 @@ MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b25690ccadc..edca0a04329 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -181,7 +181,7 @@ static void __init e330_init(void)
 MACHINE_START(E330, "Toshiba e330")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -230,7 +230,7 @@ static void __init e350_init(void)
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -352,7 +352,7 @@ static void __init e400_init(void)
 MACHINE_START(E400, "Toshiba e400")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -540,7 +540,7 @@ static void __init e740_init(void)
 MACHINE_START(E740, "Toshiba e740")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -731,7 +731,7 @@ static void __init e750_init(void)
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -926,7 +926,7 @@ static void __init e800_init(void)
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 142c711f4cd..87cec0abe5b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -798,7 +798,7 @@ static void __init a780_init(void)
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -863,7 +863,7 @@ static void __init e680_init(void)
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -928,7 +928,7 @@ static void __init a1200_init(void)
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1118,7 +1118,7 @@ static void __init a910_init(void)
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1183,7 +1183,7 @@ static void __init e6_init(void)
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1222,7 +1222,7 @@ static void __init e2_init(void)
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6451e9c3a93..d6e15f71fc0 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,8 @@
 
 #include <mach/reset.h>
 #include <mach/gpio.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
 
@@ -35,9 +37,10 @@ void clear_reset_status(unsigned int mask)
 {
 	if (cpu_is_pxa2xx())
 		pxa2xx_clear_reset_status(mask);
-
-	if (cpu_is_pxa3xx())
-		pxa3xx_clear_reset_status(mask);
+	else {
+		/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+		ARSR = mask;
+	}
 }
 
 unsigned long get_clock_tick_rate(void)
@@ -71,47 +74,17 @@ unsigned int get_clk_frequency_khz(int info)
 EXPORT_SYMBOL(get_clk_frequency_khz);
 
 /*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int get_memclk_frequency_10khz(void)
-{
-	if (cpu_is_pxa25x())
-		return pxa25x_get_memclk_frequency_10khz();
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_memclk_frequency_10khz();
-	return 0;
-}
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-
-/*
  * Intel PXA2xx internal register mapping.
  *
- * Note 1: not all PXA2xx variants implement all those addresses.
- *
- * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- *         and cache flush area.
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ *       and cache flush area.
  */
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
   	{	/* Devs */
 		.virtual	=  0xf2000000,
 		.pfn		= __phys_to_pfn(0x40000000),
 		.length		= 0x02000000,
 		.type		= MT_DEVICE
-	}, {	/* Mem Ctl */
-		.virtual	=  0xf6000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}, {	/* Camera */
-		.virtual	=  0xfa000000,
-		.pfn		= __phys_to_pfn(0x50000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* IMem ctl */
-		.virtual	=  0xfe000000,
-		.pfn		= __phys_to_pfn(0x58000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}, {	/* UNCACHED_PHYS_0 */
 		.virtual	= 0xff000000,
 		.pfn		= __phys_to_pfn(0x00000000),
@@ -122,6 +95,5 @@ static struct map_desc standard_io_desc[] __initdata = {
 
 void __init pxa_map_io(void)
 {
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-	get_clk_frequency_khz(1);
+	iotable_init(ARRAY_AND_SIZE(common_io_desc));
 }
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 4b1ad2769ed..6205dc9a2b9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,7 +20,12 @@ extern void __init pxa26x_init_irq(void);
 #endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
 extern void __init pxa_map_io(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa27x_map_io(void);
+extern void __init pxa3xx_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
 
@@ -32,18 +37,14 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 #ifdef CONFIG_PXA25x
 extern unsigned pxa25x_get_clk_frequency_khz(int);
-extern unsigned pxa25x_get_memclk_frequency_10khz(void);
 #else
 #define pxa25x_get_clk_frequency_khz(x)		(0)
-#define pxa25x_get_memclk_frequency_10khz()	(0)
 #endif
 
 #ifdef CONFIG_PXA27x
 extern unsigned pxa27x_get_clk_frequency_khz(int);
-extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #else
 #define pxa27x_get_clk_frequency_khz(x)		(0)
-#define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
 #if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
@@ -54,10 +55,8 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
-static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1e2a9a13aec..6fd319ea528 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -225,7 +225,7 @@ static void __init gumstix_init(void)
 
 MACHINE_START(GUMSTIX, "Gumstix")
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 7057a1f46db..657db469de1 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -32,6 +32,7 @@
 #include <mach/pxa25x.h>
 #include <mach/h5000.h>
 #include <mach/udc.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -172,11 +173,11 @@ static unsigned long h5000_pin_config[] __initdata = {
 
 static void fix_msc(void)
 {
-	MSC0 = 0x129c24f2;
-	MSC1 = 0x7ff424fa;
-	MSC2 = 0x7ff47ff4;
+	__raw_writel(0x129c24f2, MSC0);
+	__raw_writel(0x7ff424fa, MSC1);
+	__raw_writel(0x7ff47ff4, MSC2);
 
-	MDREFR |= 0x02080000;
+	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
 }
 
 /*
@@ -202,7 +203,7 @@ static void __init h5000_init(void)
 
 MACHINE_START(H5400, "HP iPAQ H5000")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 01b7f07ebad..e8603eba54b 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -160,7 +160,7 @@ static void __init himalaya_init(void)
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 76d93a25bab..cacb21b7014 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -871,7 +871,7 @@ static void __init hx4700_init(void)
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
 	.boot_params  = 0xa0000100,
-	.map_io       = pxa_map_io,
+	.map_io       = pxa27x_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d51ee3d25e7..ac6ee12e400 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -192,7 +192,7 @@ static void __init icontrol_init(void)
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= icontrol_init
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index e773dceeabc..dd40e4a9291 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -187,7 +187,7 @@ static struct map_desc idp_io_desc[] __initdata = {
 
 static void __init idp_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
new file mode 100644
index 00000000000..f4c03659168
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS		0x00000000
+#define PXA_CS1_PHYS		0x04000000
+#define PXA_CS2_PHYS		0x08000000
+#define PXA_CS3_PHYS		0x0C000000
+#define PXA_CS4_PHYS		0x10000000
+#define PXA_CS5_PHYS		0x14000000
+
+#define PXA300_CS0_PHYS		0x00000000	/* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS		0x30000000	/* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS		0x10000000
+#define PXA3xx_CS3_PHYS		0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS		0x40000000
+#define PERIPH_VIRT		0xf2000000
+#define PERIPH_SIZE		0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS	0x48000000
+#define PXA3XX_SMEMC_PHYS	0x4a000000
+#define SMEMC_VIRT		0xf6000000
+#define SMEMC_SIZE		0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS		0x48100000
+#define DMEMC_VIRT		0xf6100000
+#define DMEMC_SIZE		0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS		0x58000000
+#define IMEMC_VIRT		0xfe000000
+#define IMEMC_SIZE		0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 561562b4360..7074e76146c 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,6 +26,8 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH	0x01000000
 
+#define	BALLOON3_FPGA_SETnCLR		(0x1000)
+
 /* FPGA / CPLD registers for CF socket */
 #define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
 #define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
@@ -35,7 +37,7 @@ enum balloon3_features {
 #define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
 #define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
 #define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
 #define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
 
 /* fpga/cpld interrupt control register */
@@ -174,7 +176,7 @@ enum balloon3_features {
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 4)
+#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
 
 extern int balloon3_has(enum balloon3_features feature);
 
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 58dada11054..388a96f1ef9 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
  */
 
 enum {
-	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_EVALBOARD = 0,
 	COLIBRI_PXA270_INCOME,
 };
 
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
 #else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
 #endif
 
 #if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
@@ -59,5 +59,11 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 #define GPIO0_COLIBRI_PXA270_SD_DETECT	0
 #define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO39_COLIBRI_PXA300_SD_DETECT	39
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
+
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 814f1458a06..6957ba56025 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
+#include <mach/addr-map.h>
+
 /*
  * Workarounds for at least 2 errata so far require this.
  * The mapping is set in mach-pxa/generic.c.
@@ -193,14 +195,15 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
-#ifdef CONFIG_CPU_PXA950
-#define __cpu_is_pxa950(id)                             \
-	({                                              \
+#ifdef CONFIG_CPU_PXA955
+#define __cpu_is_pxa955(id)				\
+	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x697;				\
-	 })
+		_id == 0x581 || _id == 0xc08		\
+			|| _id == 0xb76;		\
+	})
 #else
-#define __cpu_is_pxa950(id)	(0)
+#define __cpu_is_pxa955(id)	(0)
 #endif
 
 #define cpu_is_pxa210()					\
@@ -253,16 +256,15 @@
 		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa950()					\
+#define cpu_is_pxa955()					\
 	({						\
-		__cpu_is_pxa950(read_cpuid_id());	\
-	 })
+		__cpu_is_pxa955(read_cpuid_id());	\
+	})
 
 
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
  */
 #if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
@@ -277,8 +279,10 @@
 #ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id == 0x3;				\
+		__cpu_is_pxa300(id)			\
+			|| __cpu_is_pxa310(id)		\
+			|| __cpu_is_pxa320(id)		\
+			|| __cpu_is_pxa93x(id);		\
 	 })
 #else
 #define __cpu_is_pxa3xx(id)	(0)
@@ -287,13 +291,22 @@
 #if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683 || _id == 0x693;		\
+		__cpu_is_pxa930(id)			\
+			|| __cpu_is_pxa935(id);		\
 	 })
 #else
 #define __cpu_is_pxa93x(id)	(0)
 #endif
 
+#ifdef CONFIG_PXA95x
+#define __cpu_is_pxa95x(id)				\
+	({						\
+		__cpu_is_pxa955(id);			\
+	})
+#else
+#define __cpu_is_pxa95x(id)	(0)
+#endif
+
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -308,6 +321,12 @@
 	({						\
 		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
+
+#define cpu_is_pxa95x()					\
+	({						\
+		__cpu_is_pxa95x(read_cpuid_id());	\
+	})
+
 /*
  * return current memory and LCD clock frequency in units of 10kHz
  */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index d372caa75dc..a4285fc0087 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -21,16 +21,14 @@
 
 #define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
 #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI,PXA27x) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI,PXA27x) */
 #define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt (PXA27x) */
+#define IRQ_ACIPC0	PXA_IRQ(5)	/* AP-CP Communication (PXA930) */
 #define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#endif
-
 #define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
 #define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
 #define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
@@ -38,7 +36,8 @@
 #define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
 #define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
 #define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt (PXA27x) */
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request (PXA3xx) */
 #define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
 #define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
 #define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
@@ -47,6 +46,7 @@
 #define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
 #define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
 #define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define IRQ_ACIPC2	PXA_IRQ(19)	/* AP-CP Communication (PXA930) */
 #define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
 #define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
 #define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
@@ -60,19 +60,17 @@
 #define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
 #define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
 #define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
 #define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller (PXA3xx) */
+#define IRQ_ACIPC1	PXA_IRQ(40)	/* AP-CP Communication (PXA930) */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball (PXA930) */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
 #define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
@@ -80,30 +78,14 @@
 #define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
 #define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-#endif
 
-#ifdef CONFIG_CPU_PXA935
 #define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
 #define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
-
-#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
-#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
-#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
-
+#define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
+#define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
+#define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
+#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
 #define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
-#define IRQ_ACIPC0	PXA_IRQ(5)
-#define IRQ_ACIPC1	PXA_IRQ(40)
-#define IRQ_ACIPC2	PXA_IRQ(19)
-#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
-#endif
-
-#ifdef CONFIG_CPU_PXA950
-#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
-#endif
 
 #define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
 #define PXA_GPIO_IRQ_NUM	(192)
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 4fcddd9cab7..ee6ced1cea7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -17,72 +17,6 @@
 #include <mach/hardware.h>
 
 /*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-/*
- * Memory controller
- */
-
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-/*
  * Power Manager
  */
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e91d63cfe81..e4fb4668c26 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -16,15 +16,6 @@
 #include <mach/hardware.h>
 
 /*
- * Static Chip Selects
- */
-
-#define PXA300_CS0_PHYS		(0x00000000)	/* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS		(0x30000000)	/* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS		(0x10000000)
-#define PXA3xx_CS3_PHYS		(0x14000000)
-
-/*
  * Oscillator Configuration Register (OSCC)
  */
 #define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index 68464ce1c1e..662288eb6f9 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -27,8 +27,4 @@
 #define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
 #define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
 
-#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
-				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
-				: (0x128 + ((x - 64) << 2)))))
-
 #endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 00000000000..654adc90c9a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE	0x48000000
+#define PXA3XX_SMEMC_BASE	0x4a000000
+#define SMEMC_VIRT		0xf6000000
+
+#define MDCNFG		(SMEMC_VIRT + 0x00)  /* SDRAM Configuration Register 0 */
+#define MDREFR		(SMEMC_VIRT + 0x04)  /* SDRAM Refresh Control Register */
+#define MSC0		(SMEMC_VIRT + 0x08)  /* Static Memory Control Register 0 */
+#define MSC1		(SMEMC_VIRT + 0x0C)  /* Static Memory Control Register 1 */
+#define MSC2		(SMEMC_VIRT + 0x10)  /* Static Memory Control Register 2 */
+#define MECR		(SMEMC_VIRT + 0x14)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		(SMEMC_VIRT + 0x18)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		(SMEMC_VIRT + 0x1C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		(SMEMC_VIRT + 0x24)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		(SMEMC_VIRT + 0x28)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		(SMEMC_VIRT + 0x2C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		(SMEMC_VIRT + 0x30)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		(SMEMC_VIRT + 0x34)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		(SMEMC_VIRT + 0x38)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		(SMEMC_VIRT + 0x3C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		(SMEMC_VIRT + 0x40)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	(SMEMC_VIRT + 0x44)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG	(SMEMC_VIRT + 0x68)  /* Clock Configuration */
+#define CSADRCFG0	(SMEMC_VIRT + 0x80)  /* Address Configuration Register for CS0 */
+#define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
+#define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
+#define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	(SMEMC_VIRT + 0x28 + ((s)<<2))  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	(SMEMC_VIRT + 0x30 + ((s)<<2))  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		(SMEMC_VIRT + 0x38 + ((s)<<2))  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 1beb40f692f..54e91c9e71c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -16,20 +16,31 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <mach/irqs.h>
 #include <mach/gpio.h>
-#include <mach/regs-intc.h>
 
 #include "generic.h"
 
-#define MAX_INTERNAL_IRQS	128
+#define IRQ_BASE		(void __iomem *)io_p2v(0x40d00000)
+
+#define ICIP			(0x000)
+#define ICMR			(0x004)
+#define ICLR			(0x008)
+#define ICFR			(0x00c)
+#define ICPR			(0x010)
+#define ICCR			(0x014)
+#define ICHP			(0x018)
+#define IPR(i)			(((i) < 32) ? (0x01c + ((i) << 2)) :		\
+				((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) :	\
+				      (0x144 + (((i) - 64) << 2)))
+#define IPR_VALID		(1 << 31)
+#define IRQ_BIT(n)		(((n) - PXA_IRQ(0)) & 0x1f)
 
-#define IRQ_BIT(n)	(((n) - PXA_IRQ(0)) & 0x1f)
-#define _ICMR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
-#define _ICLR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
+#define MAX_INTERNAL_IRQS	128
 
 /*
  * This is for peripheral IRQs internal to the PXA chip.
@@ -37,14 +48,27 @@
 
 static int pxa_internal_irq_nr;
 
+static inline int cpu_has_ipr(void)
+{
+	return !cpu_is_pxa25x();
+}
+
 static void pxa_mask_irq(unsigned int irq)
 {
-	_ICMR(irq) &= ~(1 << IRQ_BIT(irq));
+	void __iomem *base = get_irq_chip_data(irq);
+	uint32_t icmr = __raw_readl(base + ICMR);
+
+	icmr &= ~(1 << IRQ_BIT(irq));
+	__raw_writel(icmr, base + ICMR);
 }
 
 static void pxa_unmask_irq(unsigned int irq)
 {
-	_ICMR(irq) |= 1 << IRQ_BIT(irq);
+	void __iomem *base = get_irq_chip_data(irq);
+	uint32_t icmr = __raw_readl(base + ICMR);
+
+	icmr |= 1 << IRQ_BIT(irq);
+	__raw_writel(icmr, base + ICMR);
 }
 
 static struct irq_chip pxa_internal_irq_chip = {
@@ -86,12 +110,16 @@ static void pxa_ack_low_gpio(unsigned int irq)
 
 static void pxa_mask_low_gpio(unsigned int irq)
 {
-	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	desc->chip->mask(irq);
 }
 
 static void pxa_unmask_low_gpio(unsigned int irq)
 {
-	ICMR |= 1 << (irq - PXA_IRQ(0));
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	desc->chip->unmask(irq);
 }
 
 static struct irq_chip pxa_low_gpio_chip = {
@@ -120,33 +148,45 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
 	pxa_low_gpio_chip.set_wake = fn;
 }
 
+static inline void __iomem *irq_base(int i)
+{
+	static unsigned long phys_base[] = {
+		0x40d00000,
+		0x40d0009c,
+		0x40d00130,
+	};
+
+	return (void __iomem *)io_p2v(phys_base[i >> 5]);
+}
+
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq, i;
+	int irq, i, n;
 
 	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
 
 	pxa_internal_irq_nr = irq_nr;
 
-	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
-		_ICMR(irq) = 0;	/* disable all IRQs */
-		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
-	}
-
-	/* initialize interrupt priority */
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
-		for (i = 0; i < irq_nr; i++)
-			IPR(i) = i | (1 << 31);
+	for (n = 0; n < irq_nr; n += 32) {
+		void __iomem *base = irq_base(n);
+
+		__raw_writel(0, base + ICMR);	/* disable all IRQs */
+		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
+		for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
+			/* initialize interrupt priority */
+			if (cpu_has_ipr())
+				__raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+
+			irq = PXA_IRQ(i);
+			set_irq_chip(irq, &pxa_internal_irq_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
 	}
 
 	/* only unmasked interrupts kick us out of idle */
-	ICCR = 1;
-
-	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
-		set_irq_chip(irq, &pxa_internal_irq_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
+	__raw_writel(1, irq_base(0) + ICCR);
 
 	pxa_internal_irq_chip.set_wake = fn;
 	pxa_init_low_gpio_irq(fn);
@@ -158,16 +198,18 @@ static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
-	int i, irq = PXA_IRQ(0);
+	int i;
 
-	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
-		saved_icmr[i] = _ICMR(irq);
-		_ICMR(irq) = 0;
+	for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+		void __iomem *base = irq_base(i);
+
+		saved_icmr[i] = __raw_readl(base + ICMR);
+		__raw_writel(0, base + ICMR);
 	}
 
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+	if (cpu_has_ipr()) {
 		for (i = 0; i < pxa_internal_irq_nr; i++)
-			saved_ipr[i] = IPR(i);
+			saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
 	}
 
 	return 0;
@@ -175,19 +217,20 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 
 static int pxa_irq_resume(struct sys_device *dev)
 {
-	int i, irq = PXA_IRQ(0);
+	int i;
 
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			IPR(i) = saved_ipr[i];
-	}
+	for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+		void __iomem *base = irq_base(i);
 
-	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
-		_ICMR(irq) = saved_icmr[i];
-		_ICLR(irq) = 0;
+		__raw_writel(saved_icmr[i], base + ICMR);
+		__raw_writel(0, base + ICLR);
 	}
 
-	ICCR = 1;
+	if (!cpu_is_pxa25x())
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+
+	__raw_writel(1, IRQ_BASE + ICCR);
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 41aa89e3577..719c260597e 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -438,7 +438,7 @@ static void __init littleton_init(void)
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 623af0232a5..8ab62a67780 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -463,7 +464,7 @@ static void __init lpd270_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
 	/*
@@ -495,7 +496,7 @@ static struct map_desc lpd270_io_desc[] __initdata = {
 
 static void __init lpd270_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
 	/* for use I SRAM as framebuffer.  */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1499493cd07..d3375486c8c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -50,6 +50,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pm.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -525,7 +526,7 @@ static void __init lubbock_init(void)
 	pxa_set_ac97_info(NULL);
 
 	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(BOOT_DEF & 1) ? 2 : 4;
+		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	/* Compensate for the nROMBT switch which swaps the flash banks */
 	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
 	       flashboot?"Flash":"ROM", flashboot);
@@ -549,7 +550,7 @@ static struct map_desc lubbock_io_desc[] __initdata = {
 
 static void __init lubbock_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 
 	PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 90663760307..41198f0dc3a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -765,7 +765,7 @@ static void __init magician_init(void)
 
 MACHINE_START(MAGICIAN, "HTC Magician")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa27x_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a980a5c93e4..740c03590e3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -51,6 +51,7 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 #include <plat/pxa27x_keypad.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -565,7 +566,7 @@ static void __init mainstone_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
 	/* Compensate for SW7 which swaps the flash banks */
@@ -614,7 +615,7 @@ static struct map_desc mainstone_io_desc[] __initdata = {
 
 static void __init mainstone_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
 
  	/*	for use I SRAM as framebuffer.	*/
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f5fb915e131..faafea3542f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -819,7 +819,7 @@ static void mioa701_machine_exit(void)
 
 MACHINE_START(MIOA701, "MIO A701")
 	.boot_params	= 0xa0000100,
-	.map_io		= &pxa_map_io,
+	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 116167aaba6..59cce78aebd 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -94,7 +94,7 @@ static void __init mp900c_init(void)
 MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.boot_params	= 0xa0220100,
 	.timer		= &pxa_timer,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= mp900c_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ce092c521e6..a6f898cbfac 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -313,7 +313,7 @@ static struct map_desc palmld_io_desc[] __initdata = {
 
 static void __init palmld_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 862da812cd1..df4d7d009fb 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -203,7 +203,7 @@ static void __init palmt5_init(void)
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 2131d586091..a09a2374697 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -25,6 +25,7 @@
 #include <linux/power_supply.h>
 #include <linux/gpio_keys.h>
 #include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -116,6 +117,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
@@ -124,9 +126,18 @@ static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.detect_delay_ms	= 200,
 };
 
+static void __init palmtc_mmc_init(void)
+{
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtc_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
 };
@@ -144,9 +155,18 @@ static struct platform_device palmtc_pxa_keys = {
 	},
 };
 
+static void __init palmtc_keys_init(void)
+{
+	platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 static int palmtc_backlight_init(struct device *dev)
 {
 	int ret;
@@ -196,17 +216,35 @@ static struct platform_device palmtc_backlight = {
 	},
 };
 
+static void __init palmtc_pwm_init(void)
+{
+	platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init palmtc_irda_init(void)
+{
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
 /******************************************************************************
  * Keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 static const uint32_t palmtc_matrix_keys[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 1, KEY_X),
@@ -290,27 +328,103 @@ static struct platform_device palmtc_keyboard = {
 		.platform_data = &palmtc_keypad_platform_data,
 	},
 };
+static void __init palmtc_mkp_init(void)
+{
+	platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
 
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
 };
 
+static struct platform_device palmtc_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_udc_info,
+	},
+};
+
+static void __init palmtc_udc_init(void)
+{
+	platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
 /******************************************************************************
  * Touchscreen / Battery / GPIO-extender
  ******************************************************************************/
-static struct platform_device palmtc_ucb1400_core = {
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
 	.name	= "ucb1400_core",
 	.id	= -1,
 };
 
+static void __init palmtc_ts_init(void)
+{
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+	.name			= "palmtc:green:user",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_LED_POWER,
+	.active_low		= 1,
+}, {
+	.name			= "palmtc:vibra:vibra",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
+	.active_low		= 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+	.leds		= palmtc_gpio_leds,
+	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_gpio_led_info,
+	}
+};
+
+static void __init palmtc_leds_init(void)
+{
+	platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct resource palmtc_flash_resource = {
 	.start	= PXA_CS0_PHYS,
 	.end	= PXA_CS0_PHYS + SZ_16M - 1,
@@ -356,24 +470,33 @@ static struct platform_device palmtc_flash = {
 	},
 };
 
+static void __init palmtc_nor_init(void)
+{
+	platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info palmtc_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
+	{
+		.pixclock	= 115384,
+		.xres		= 320,
+		.yres		= 320,
+		.bpp		= 16,
+
+		.left_margin	= 27,
+		.right_margin	= 7,
+		.upper_margin	= 7,
+		.lower_margin	= 8,
+
+		.hsync_len	= 6,
+		.vsync_len	= 1,
+	},
 };
 
 static struct pxafb_mach_info palmtc_lcd_screen = {
@@ -382,17 +505,17 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static void __init palmtc_lcd_init(void)
+{
+	set_pxa_fb_info(&palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmtc_backlight,
-	&palmtc_ucb1400_core,
-	&palmtc_keyboard,
-	&palmtc_pxa_keys,
-	&palmtc_flash,
-};
-
 static void __init palmtc_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
@@ -402,18 +525,21 @@ static void __init palmtc_init(void)
 	pxa_set_stuart_info(NULL);
 	pxa_set_hwuart_info(NULL);
 
-	set_pxa_fb_info(&palmtc_lcd_screen);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-	pxa_set_udc_info(&palmtc_udc_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palmtc_mmc_init();
+	palmtc_keys_init();
+	palmtc_pwm_init();
+	palmtc_irda_init();
+	palmtc_mkp_init();
+	palmtc_udc_init();
+	palmtc_ts_init();
+	palmtc_nor_init();
+	palmtc_lcd_init();
+	palmtc_leds_init();
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.boot_params 	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmtc_init
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a9dae7bc35d..3f25014a136 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -374,7 +374,7 @@ static void __init palmte2_init(void)
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmte2_init
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 00e2d7ba84e..8aadad55fbe 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -442,7 +442,7 @@ static void __init centro_init(void)
 
 MACHINE_START(TREO680, "Palm Treo 680")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -451,7 +451,7 @@ MACHINE_END
 
 MACHINE_START(CENTRO, "Palm Centro 685")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e5c9932b758..595f002066c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -334,7 +334,7 @@ static struct map_desc palmtx_io_desc[] __initdata = {
 
 static void __init palmtx_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index af6203fbca9..7bf4017326e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -280,7 +280,7 @@ static void __init palmz72_init(void)
 
 MACHINE_START(PALMZ72, "Palm Zire72")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmz72_init
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index c77e8f30a43..8547c9abc40 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -244,7 +244,7 @@ static void __init pcm027_init(void)
 
 static void __init pcm027_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 
 	/* initialize sleep mode regs (wake-up sources, etc) */
 	PGSR0 = 0x01308000;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 93a191c889d..8451790cb48 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -466,7 +466,7 @@ static void __init fixup_poodle(struct machine_desc *desc,
 
 MACHINE_START(POODLE, "SHARP Poodle")
 	.fixup		= fixup_poodle,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index de53f2e4aa3..3f5241c8489 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,6 +23,7 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
@@ -30,6 +31,7 @@
 #include <mach/reset.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -90,23 +92,21 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
 	return (turbo & 1) ? (N/1000) : (M/1000);
 }
 
-/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int pxa25x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
 {
-	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
+	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
 }
 
-static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
-{
-	return pxa25x_get_memclk_frequency_10khz() * 10000;
-}
+static const struct clkops clk_pxa25x_mem_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+	.getrate	= clk_pxa25x_mem_getrate,
+};
 
 static const struct clkops clk_pxa25x_lcd_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
-	.getrate	= clk_pxa25x_lcd_getrate,
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
+	.getrate	= clk_pxa25x_mem_getrate,
 };
 
 static unsigned long gpio12_config_32k[] = {
@@ -160,31 +160,30 @@ static const struct clkops clk_pxa25x_gpio11_ops = {
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
  */
-static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
-	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
 
 /*
  * PXA 2xx clock declarations.
  */
+static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
 static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
 static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
 static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
 
 static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
@@ -205,8 +204,12 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
+	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
 };
 
+static struct clk_lookup pxa25x_hwuart_clkreg =
+	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
+
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -219,20 +222,17 @@ static struct clk_lookup pxa25x_clkregs[] = {
  */
 enum {
 	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_CKEN,
 	SLEEP_SAVE_COUNT
 };
 
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(CKEN);
 	SAVE(PSTR);
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
 
@@ -320,6 +320,22 @@ void __init pxa26x_init_irq(void)
 }
 #endif
 
+static struct map_desc pxa25x_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init pxa25x_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+	pxa25x_get_clk_frequency_khz(1);
+}
+
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
 	&pxa_device_pmu,
@@ -339,7 +355,9 @@ static struct sys_device pxa25x_sysdev[] = {
 		.cls	= &pxa2xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa2xx_clock_sysclass,
+	}
 };
 
 static int __init pxa25x_init(void)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d1fbf29d561..b2130b7a7b5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -17,7 +17,9 @@
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
@@ -27,6 +29,8 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
+#include <mach/smemc.h>
+
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -107,10 +111,9 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
 }
 
 /*
- * Return the current mem clock frequency in units of 10kHz as
- * reflected by CCCR[A], B, and L
+ * Return the current mem clock frequency as reflected by CCCR[A], B, and L
  */
-unsigned int pxa27x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M;
@@ -129,9 +132,15 @@ unsigned int pxa27x_get_memclk_frequency_10khz(void)
 	L = l * BASE_CLK;
 	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
 
-	return (M / 10000);
+	return M;
 }
 
+static const struct clkops clk_pxa27x_mem_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+	.getrate	= clk_pxa27x_mem_getrate,
+};
+
 /*
  * Return the current LCD clock frequency in units of 10kHz as
  */
@@ -157,36 +166,38 @@ static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
 }
 
 static const struct clkops clk_pxa27x_lcd_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
 	.getrate	= clk_pxa27x_lcd_getrate,
 };
 
+static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
+
 static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
 static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
 
 static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
@@ -215,6 +226,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -246,7 +258,6 @@ int __init pxa27x_set_pwrmode(unsigned int mode)
  */
 enum {
 	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_CKEN,
 	SLEEP_SAVE_MDREFR,
 	SLEEP_SAVE_PCFR,
 	SLEEP_SAVE_COUNT
@@ -254,21 +265,19 @@ enum {
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(MDREFR);
+	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
 
-	SAVE(CKEN);
 	SAVE(PSTR);
 }
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	RESTORE(MDREFR);
+	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
-	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
 
@@ -370,6 +379,27 @@ void __init pxa27x_init_irq(void)
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
 }
 
+static struct map_desc pxa27x_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}, {	/* IMem ctl */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0x58000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init pxa27x_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+	pxa27x_get_clk_frequency_khz(1);
+}
+
 /*
  * device registration specific to PXA27x.
  */
@@ -405,7 +435,9 @@ static struct sys_device pxa27x_sysdev[] = {
 		.cls	= &pxa2xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa2xx_clock_sysclass,
+	}
 };
 
 static int __init pxa27x_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index d1c747cdacf..e14818f5d95 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
@@ -30,193 +31,16 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/regs-intc.h>
+#include <mach/smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK		60000000
-
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_PCCE	(1 << 11)
-
 #define PECR_IE(n)	((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
-	unsigned long acsr, xclkcfg;
-	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
-	/* Read XCLKCFG register turbo bit */
-	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
-	t = xclkcfg & 0x1;
-
-	acsr = ACSR;
-
-	xl  = acsr & 0x1f;
-	xn  = (acsr >> 8) & 0x7;
-	hss = (acsr >> 14) & 0x3;
-
-	XL = xl * BASE_CLK;
-	XN = xn * XL;
-
-	ro = acsr & ACCR_D0CS;
-
-	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
-	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	if (info) {
-		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
-			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
-			(ro) ? "" : "in");
-		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
-			XL / 1000000, (XL % 1000000) / 10000, xl);
-		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
-			XN / 1000000, (XN % 1000000) / 10000, xn,
-			(t) ? "" : "in");
-		pr_info("HSIO bus clock: %d.%02dMHz\n",
-			HSS / 1000000, (HSS % 1000000) / 10000);
-	}
-
-	return CLK / 1000;
-}
-
-void pxa3xx_clear_reset_status(unsigned int mask)
-{
-	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
-	ARSR = mask;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
-	unsigned long rate = 312000000;
-	unsigned long ac97_div;
-
-	ac97_div = AC97_DIV;
-
-	/* This may loose precision for some rates but won't for the
-	 * standard 24.576MHz.
-	 */
-	rate /= (ac97_div >> 12) & 0x7fff;
-	rate *= (ac97_div & 0xfff);
-
-	return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
-	unsigned long acsr;
-	unsigned int hss, hsio_clk;
-
-	acsr = ACSR;
-
-	hss = (acsr >> 14) & 0x3;
-	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	return hsio_clk;
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA |= mask;
-	else
-		CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA &= ~mask;
-	else
-		CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-};
-
-static const struct clkops clk_pxa3xx_hsio_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_hsio_getrate,
-};
-
-static const struct clkops clk_pxa3xx_ac97_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_ac97_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
-	OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
-	OSCC &= ~OSCC_PEN;
-}
-
-static const struct clkops clk_pout_ops = {
-	.enable		= clk_pout_enable,
-	.disable	= clk_pout_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk)
-{
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-static struct clk clk_pxa3xx_pout = {
-	.ops		= &clk_pout_ops,
-	.rate		= 13000000,
-	.delay		= 70,
-};
-
-static struct clk clk_dummy = {
-	.ops		= &clk_dummy_ops,
-};
-
-static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -234,6 +58,12 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 
+static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
+static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
@@ -258,6 +88,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -268,30 +99,6 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 static void __iomem *sram;
 static unsigned long wakeup_src;
 
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-enum {	SLEEP_SAVE_CKENA,
-	SLEEP_SAVE_CKENB,
-	SLEEP_SAVE_ACCR,
-
-	SLEEP_SAVE_COUNT,
-};
-
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
-	SAVE(CKENA);
-	SAVE(CKENB);
-	SAVE(ACCR);
-}
-
-static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
-{
-	RESTORE(ACCR);
-	RESTORE(CKENA);
-	RESTORE(CKENB);
-}
-
 /*
  * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
  * memory controller has to be reinitialised, so we place some code
@@ -390,9 +197,6 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.save		= pxa3xx_cpu_pm_save,
-	.restore	= pxa3xx_cpu_pm_restore,
 	.valid		= pxa3xx_cpu_pm_valid,
 	.enter		= pxa3xx_cpu_pm_enter,
 };
@@ -580,6 +384,22 @@ void __init pxa3xx_init_irq(void)
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init pxa3xx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+	pxa3xx_get_clk_frequency_khz(1);
+}
+
 /*
  * device registration specific to PXA3xx.
  */
@@ -615,7 +435,9 @@ static struct sys_device pxa3xx_sysdev[] = {
 		.cls	= &pxa3xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa3xx_clock_sysclass,
+	}
 };
 
 static int __init pxa3xx_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7d29dd3af79..8aeacf90878 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
+	if (cpu_is_pxa93x()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
new file mode 100644
index 00000000000..437980f7271
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa95x.c
+ *
+ * code specific to PXA95x aka MGx
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/pxa930.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/regs-intc.h>
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+
+static struct clk_lookup pxa95x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
+	/* Power I2C clock is always on */
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
+	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+};
+
+void __init pxa95x_init_irq(void)
+{
+	pxa_init_irq(96, NULL);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
+}
+
+/*
+ * device registration specific to PXA93x.
+ */
+
+void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct platform_device *devices[] __initdata = {
+	&sa1100_device_rtc,
+	&pxa_device_rtc,
+	&pxa27x_device_ssp1,
+	&pxa27x_device_ssp2,
+	&pxa27x_device_ssp3,
+	&pxa3xx_device_ssp4,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
+};
+
+static struct sys_device pxa95x_sysdev[] = {
+	{
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.cls	= &pxa_gpio_sysclass,
+	}, {
+		.cls	= &pxa3xx_clock_sysclass,
+	}
+};
+
+static int __init pxa95x_init(void)
+{
+	int ret = 0, i;
+
+	if (cpu_is_pxa95x()) {
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa95x_mfp_addr_map);
+
+		reset_status = ARSR;
+
+		/*
+		 * clear RDH bit every time after reset
+		 *
+		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
+		 * preserve them here in case they will be referenced later
+		 */
+		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
+
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
+			return ret;
+
+		for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
+			ret = sysdev_register(&pxa95x_sysdev[i]);
+			if (ret)
+				pr_err("failed to register sysdev[%d]\n", i);
+		}
+
+		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	}
+
+	return ret;
+}
+
+postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 4121d03ea2c..8361151be05 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -588,6 +588,9 @@ static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
 	.num_modes	= 1,
 	.video_mem_size = 0x400000,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+#ifdef CONFIG_PXA3XX_GCU
+	.acceleration_enabled = 1,
+#endif
 };
 
 static void __init raumfeld_lcd_init(void)
@@ -616,6 +619,8 @@ static void __init raumfeld_lcd_init(void)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+
+	platform_device_register(&pxa3xx_device_gcu);
 }
 
 /**
@@ -1085,7 +1090,7 @@ static void __init raumfeld_speaker_init(void)
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1095,7 +1100,7 @@ MACHINE_END
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1105,7 +1110,7 @@ MACHINE_END
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ffa50e633ee..c1ca8cb467f 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -597,7 +597,7 @@ static void __init saar_init(void)
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
new file mode 100644
index 00000000000..e497922f761
--- /dev/null
+++ b/arch/arm/mach-pxa/saarb.c
@@ -0,0 +1,114 @@
+/*
+ *  linux/arch/arm/mach-pxa/saarb.c
+ *
+ *  Support for the Marvell Handheld Platform (aka SAARB)
+ *
+ *  Copyright (C) 2007-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa930.h>
+#include <mach/gpio.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+
+#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
+
+static struct pm860x_touch_pdata saarb_touch = {
+	.gpadc_prebias	= 1,
+	.slot_cycle	= 1,
+	.tsi_prebias	= 6,
+	.pen_prebias	= 16,
+	.pen_prechg	= 2,
+	.res_x		= 300,
+};
+
+static struct pm860x_backlight_pdata saarb_backlight[] = {
+	{
+		.id	= PM8606_ID_BACKLIGHT,
+		.iset	= PM8606_WLED_CURRENT(24),
+		.flags	= PM8606_BACKLIGHT1,
+	},
+	{},
+};
+
+static struct pm860x_led_pdata saarb_led[] = {
+	{
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_BLUE,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_BLUE,
+	},
+};
+
+static struct pm860x_platform_data saarb_pm8607_info = {
+	.touch		= &saarb_touch,
+	.backlight	= &saarb_backlight[0],
+	.led		= &saarb_led[0],
+	.companion_addr	= 0x10,
+	.irq_mode	= 0,
+	.irq_base	= IRQ_BOARD_START,
+
+	.i2c_port	= GI2C_PORT,
+};
+
+static struct i2c_board_info saarb_i2c_info[] = {
+	{
+		.type		= "88PM860x",
+		.addr		= 0x34,
+		.platform_data	= &saarb_pm8607_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init saarb_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
+}
+
+MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.nr_irqs	= SAARB_NR_IRQS,
+	.init_irq       = pxa95x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saarb_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index ae008110db4..c551da86baf 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
-
+#include <mach/smemc.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index d6f6904132a..232b7316ec0 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -9,50 +9,37 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
-
-#define SMEMC_PHYS_BASE	(0x4A000000)
-#define SMEMC_PHYS_SIZE	(0x90)
-
-#define MSC0		(0x08)	/* Static Memory Controller Register 0 */
-#define MSC1		(0x0C)	/* Static Memory Controller Register 1 */
-#define SXCNFG		(0x1C)	/* Synchronous Static Memory Control Register */
-#define MEMCLKCFG	(0x68)	/* Clock Configuration */
-#define CSADRCFG0	(0x80)	/* Address Configuration Register for CS0 */
-#define CSADRCFG1	(0x84)	/* Address Configuration Register for CS1 */
-#define CSADRCFG2	(0x88)	/* Address Configuration Register for CS2 */
-#define CSADRCFG3	(0x8C)	/* Address Configuration Register for CS3 */
+#include <mach/smemc.h>
 
 #ifdef CONFIG_PM
-static void __iomem *smemc_mmio_base;
-
 static unsigned long msc[2];
 static unsigned long sxcnfg, memclkcfg;
 static unsigned long csadrcfg[4];
 
 static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
 {
-	msc[0] = __raw_readl(smemc_mmio_base + MSC0);
-	msc[1] = __raw_readl(smemc_mmio_base + MSC1);
-	sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
-	memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
-	csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
-	csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
-	csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
-	csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+	msc[0] = __raw_readl(MSC0);
+	msc[1] = __raw_readl(MSC1);
+	sxcnfg = __raw_readl(SXCNFG);
+	memclkcfg = __raw_readl(MEMCLKCFG);
+	csadrcfg[0] = __raw_readl(CSADRCFG0);
+	csadrcfg[1] = __raw_readl(CSADRCFG1);
+	csadrcfg[2] = __raw_readl(CSADRCFG2);
+	csadrcfg[3] = __raw_readl(CSADRCFG3);
 
 	return 0;
 }
 
 static int pxa3xx_smemc_resume(struct sys_device *dev)
 {
-	__raw_writel(msc[0], smemc_mmio_base + MSC0);
-	__raw_writel(msc[1], smemc_mmio_base + MSC1);
-	__raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
-	__raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
-	__raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
-	__raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
-	__raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
-	__raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+	__raw_writel(msc[0], MSC0);
+	__raw_writel(msc[1], MSC1);
+	__raw_writel(sxcnfg, SXCNFG);
+	__raw_writel(memclkcfg, MEMCLKCFG);
+	__raw_writel(csadrcfg[0], CSADRCFG0);
+	__raw_writel(csadrcfg[1], CSADRCFG1);
+	__raw_writel(csadrcfg[2], CSADRCFG2);
+	__raw_writel(csadrcfg[3], CSADRCFG3);
 
 	return 0;
 }
@@ -73,10 +60,6 @@ static int __init smemc_init(void)
 	int ret = 0;
 
 	if (cpu_is_pxa3xx()) {
-		smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
-		if (smemc_mmio_base == NULL)
-			return -ENODEV;
-
 		ret = sysdev_class_register(&smemc_sysclass);
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f736119f1eb..0499a69e767 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -44,6 +45,7 @@
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
+#include <mach/smemc.h>
 
 #include <plat/i2c.h>
 
@@ -929,9 +931,10 @@ static void spitz_poweroff(void)
 
 static void spitz_restart(char mode, const char *cmd)
 {
+	uint32_t msc0 = __raw_readl(MSC0);
 	/* Bootloader magic for a reboot */
-	if ((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if ((msc0 & 0xffff0000) == 0x7ff00000)
+		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
 
 	spitz_poweroff();
 }
@@ -980,7 +983,7 @@ static void __init spitz_fixup(struct machine_desc *desc,
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -990,7 +993,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -1000,7 +1003,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 738adc1773f..3498a142394 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -48,6 +48,7 @@
 #include <mach/udc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x-udc.h>
+#include <mach/smemc.h>
 
 #include <linux/spi/spi.h>
 #include <linux/mfd/da903x.h>
@@ -976,7 +977,7 @@ static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
 	   prior to connecting the MFP stuff up. */
-	MECR &= ~MECR_NOS;
+	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
@@ -998,7 +999,7 @@ static void __init stargate2_init(void)
 
 #ifdef CONFIG_MACH_INTELMOTE2
 MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
@@ -1008,7 +1009,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa_map_io,
+	.map_io = pxa27x_map_io,
 	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 2ea7545273a..9cecf8366db 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -490,7 +490,7 @@ static void __init tavorevb_init(void)
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index dc3011697bb..70191a9450e 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -127,7 +127,7 @@ static void __init evb3_init(void)
 
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.boot_params	= 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 0ee1df49606..57d61ee9b22 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -46,6 +46,7 @@
 #include <mach/tosa_bt.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/audio.h>
+#include <mach/smemc.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -893,9 +894,11 @@ static void tosa_poweroff(void)
 
 static void tosa_restart(char mode, const char *cmd)
 {
+	uint32_t msc0 = __raw_readl(MSC0);
+
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if((msc0 & 0xffff0000) == 0x7ff00000)
+		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
 
 	tosa_poweroff();
 }
@@ -953,7 +956,7 @@ static void __init fixup_tosa(struct machine_desc *desc,
 
 MACHINE_START(TOSA, "SHARP Tosa")
 	.fixup          = fixup_tosa,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa25x_map_io,
 	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 565d062f51d..43fc9ca1459 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,6 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -539,10 +540,10 @@ static void __init trizeps4_init(void)
 
 static void __init trizeps4_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
 		/* if flash is 16 bit wide its a Trizeps4 WL */
 		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 		trizeps4_flash_data[0].width = 2;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 438fc9a5ed5..de69b203afa 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -983,7 +983,7 @@ static struct map_desc viper_io_desc[] __initdata = {
 
 static void __init viper_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 
 	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
 
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f45ac096177..b9b579715ff 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@ static void __init vpac270_init(void)
 
 MACHINE_START(VPAC270, "Voipac PXA270")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= vpac270_init
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3260ce73d32..51c0281c6e0 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -172,9 +173,9 @@ static void __init xcep_init(void)
 
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
 	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
 
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 	pxa_set_i2c_info(&xcep_i2c_platform_data);
@@ -183,7 +184,7 @@ static void __init xcep_init(void)
 MACHINE_START(XCEP, "Iskratel XCEP")
 	.boot_params	= 0xa0000100,
 	.init_machine	= xcep_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fefde9848d8..527c2a1ed31 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -704,7 +704,7 @@ static void __init z2_init(void)
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index dea46a2d089..c87f2b35ee0 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -47,6 +47,7 @@
 #include <mach/audio.h>
 #include <mach/arcom-pcmcia.h>
 #include <mach/zeus.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -823,13 +824,16 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 static void __init zeus_init(void)
 {
 	u16 dm9000_msc = DM9K_MSC_VALUE;
+	u32 msc0, msc1;
 
 	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
 
 	/* Fix timings for dm9000s (CS1/CS2)*/
-	MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
-	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+	msc0 = __raw_readl(MSC0) & 0x0000ffff | (dm9000_msc << 16);
+	msc1 = __raw_readl(MSC1) & 0xffff0000 | dm9000_msc;
+	__raw_writel(msc0, MSC0);
+	__raw_writel(msc1, MSC1);
 
 	pm_power_off = zeus_power_off;
 	zeus_setup_apm();
@@ -883,7 +887,7 @@ static struct map_desc zeus_io_desc[] __initdata = {
 
 static void __init zeus_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 
 	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 702f7a68e87..a4c784aab76 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -423,7 +423,7 @@ static void __init zylonite_init(void)
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,