Merge branch 'next/dt' into next/multiplatform

* next/dt: (182 commits)
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: dt: tegra: whistler: configure power off
  ARM: mxs: m28evk: Disable OCOTP OUI loading
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx23-olinuxino: Add USB host support
  ARM: dts: imx6q-sabrelite: add usbmisc device
  ARM: dts: mx23: Add USB resources
  ARM: dts: mxs: Add ethernetX to macX aliases
  ARM: msm: Remove non-DT targets from 8960
  ARM: msm: Add DT support for 8960
  ARM: msm: Move io mapping prototypes to common.h
  ARM: msm: Rename board-msm8x60 to signify its DT only status
  ARM: msm: Make 8660 a DT only target
  ARM: msm: Move 8660 to DT timer
  ARM: msm: Add DT support to msm_timer
  ...

1 files changed, 0 insertions, 106 deletions

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb43cb..ff007d15e0e 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
@@ -226,115 +225,10 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 	.cd_invert	= true,
 };
 
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
-	.ops	= &oscvco_clk_ops,
-	.params	= &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:uart0",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:uart1",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:uart2",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 is on the dev chip in PB1176 */
-		.dev_id		= "dev:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART4 only exists in PB1176 */
-		.dev_id		= "fpga:uart4",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:kmi0",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:kmi1",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:mmc0",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD is in the PB1176 and EB DevChip */
-		.dev_id		= "dev:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* PB:CLCD */
-		.dev_id		= "issp:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:ssp0",
-		.clk		= &ref24_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
 void __init realview_init_early(void)
 {
 	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
 
-	if (machine_is_realview_pb1176())
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
 	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
 }