[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

17 files changed, 1295 insertions, 0 deletions

diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
new file mode 100644
index 00000000000..8d699fd324d
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_EB_H
+#define __ASM_ARCH_BOARD_EB_H
+
+#include <mach/platform.h>
+
+/*
+ * RealView EB + ARM11MPCore peripheral addresses
+ */
+#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE		0x40000000
+#define REALVIEW_EB_FLASH_SIZE		SZ_64M
+#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
+#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x10100700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
+#endif
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_EB_PROC_MASK		0xFF000000
+#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
+#define REALVIEW_EB_PROC_ARM9		0x02000000
+#define REALVIEW_EB_PROC_ARM11		0x04000000
+#define REALVIEW_EB_PROC_ARM11MP	0x06000000
+
+#define check_eb_proc(proc_type)						\
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
+	 == proc_type)
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
+#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
+#else
+#define core_tile_eb11mp()	0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
new file mode 100644
index 00000000000..858eea7b1ad
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE		0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
new file mode 100644
index 00000000000..ecd80e58631
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 00000000000..7196bcadff0
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 00000000000..f1a5a1a1095
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-realview/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 00000000000..340a5c27694
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 00000000000..79a93b3dfca
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/mach-realview/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 00000000000..aa069424d31
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-realview/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 00000000000..02a918529db
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define IRQ_GIC_START		32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 00000000000..0e673483a14
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 00000000000..4034b54950c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_PROCID_OFFSET           0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
new file mode 100644
index 00000000000..d55802d645a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/scu.h
@@ -0,0 +1,13 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+/*
+ * SCU registers
+ */
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
new file mode 100644
index 00000000000..515819efd04
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -0,0 +1,30 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(cpumask_t callmap)
+{
+	gic_raise_softirq(callmap, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 00000000000..4d3c8f3f805
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ *  arch/arm/mach-realview/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 00000000000..4eeb069373c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-realview/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 00000000000..79f50f218e7
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_realview_eb())
+		return REALVIEW_EB_UART0_BASE;
+	else if (machine_is_realview_pb11mp())
+		return REALVIEW_PB11MP_UART0_BASE;
+	else if (machine_is_realview_pb1176())
+		return REALVIEW_PB1176_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 00000000000..48cbcc873db
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)