Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

1 files changed, 44 insertions, 20 deletions

diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 17fbb0e889b..7fb726d5f8b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb1176.h>
@@ -170,29 +170,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 //	&dmac_device,
@@ -290,6 +290,28 @@ static struct sys_timer realview_pb1176_timer = {
 	.init		= realview_pb1176_timer_init,
 };
 
+static void realview_pb1176_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_RESETCTL_OFFSET;
+	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_LOCK_OFFSET;
+	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+}
+
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+				  struct tag *tags, char **from,
+				  struct meminfo *meminfo)
+{
+	/*
+	 * RealView PB1176 only has 128MB of RAM mapped at 0.
+	 */
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_128M;
+	meminfo->nr_banks = 1;
+}
+
 static void __init realview_pb1176_init(void)
 {
 	int i;
@@ -313,6 +335,7 @@ static void __init realview_pb1176_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pb1176_reset;
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
@@ -320,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	.phys_io	= REALVIEW_PB1176_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,