Merge branch 'consolidate-clksrc-i8253' of master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource

Conflicts:
	arch/ia64/kernel/cyclone.c
	arch/mips/kernel/i8253.c
	arch/x86/kernel/i8253.c

Reason: Resolve conflicts so further cleanups do not conflict further

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 files changed, 61 insertions, 472 deletions

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 7ca138a943a..b9a9805e482 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -19,7 +19,7 @@ config REALVIEW_EB_A9MP
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
-	select CPU_V6
+	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -36,7 +36,7 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select CPU_V6
+	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_HAS_BARRIERS if SMP
@@ -45,6 +45,7 @@ config MACH_REALVIEW_PB11MP
 	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
 	  support for PCI-E and Compact Flash.
 
+# ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index a01b76b7c95..541fa4c109e 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -8,6 +8,5 @@ obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
 obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 1c6602cf50e..75dbc8791d0 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -51,6 +51,7 @@
 #include <mach/irqs.h>
 #include <asm/hardware/timer-sp.h>
 
+#include <plat/clcd.h>
 #include <plat/sched_clock.h>
 
 #include "core.h"
@@ -359,18 +360,19 @@ static struct clk_lookup lookups[] = {
 	}
 };
 
-static int __init clk_init(void)
+void __init realview_init_early(void)
 {
+	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
+
 	if (machine_is_realview_pb1176())
-		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
 	else
-		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
-	return 0;
+	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
 }
-core_initcall(clk_init);
 
 /*
  * CLCD support.
@@ -385,157 +387,6 @@ core_initcall(clk_init);
 #define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
 #define SYS_CLCD_ID_VGA		(0x1f << 8)
 
-static struct clcd_panel vga = {
-	.mode		= {
-		.name		= "VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.bpp		= 16,
-};
-
-static struct clcd_panel xvga = {
-	.mode		= {
-		.name		= "XVGA",
-		.refresh	= 60,
-		.xres		= 1024,
-		.yres		= 768,
-		.pixclock	= 15748,
-		.left_margin	= 152,
-		.right_margin	= 48,
-		.upper_margin	= 23,
-		.lower_margin	= 3,
-		.hsync_len	= 104,
-		.vsync_len	= 4,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.bpp		= 16,
-};
-
-static struct clcd_panel sanyo_3_8_in = {
-	.mode		= {
-		.name		= "Sanyo QVGA",
-		.refresh	= 116,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= 100000,
-		.left_margin	= 6,
-		.right_margin	= 6,
-		.upper_margin	= 5,
-		.lower_margin	= 5,
-		.hsync_len	= 6,
-		.vsync_len	= 6,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.bpp		= 16,
-};
-
-static struct clcd_panel sanyo_2_5_in = {
-	.mode		= {
-		.name		= "Sanyo QVGA Portrait",
-		.refresh	= 116,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 100000,
-		.left_margin	= 20,
-		.right_margin	= 10,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.hsync_len	= 10,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.bpp		= 16,
-};
-
-static struct clcd_panel epson_2_2_in = {
-	.mode		= {
-		.name		= "Epson QCIF",
-		.refresh	= 390,
-		.xres		= 176,
-		.yres		= 220,
-		.pixclock	= 62500,
-		.left_margin	= 3,
-		.right_margin	= 2,
-		.upper_margin	= 1,
-		.lower_margin	= 0,
-		.hsync_len	= 3,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.bpp		= 16,
-};
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static struct clcd_panel *realview_clcd_panel(void)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	struct clcd_panel *vga_panel;
-	struct clcd_panel *panel;
-	u32 val;
-
-	if (machine_is_realview_eb())
-		vga_panel = &vga;
-	else
-		vga_panel = &xvga;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel = &sanyo_3_8_in;
-	else if (val == SYS_CLCD_ID_SANYO_2_5)
-		panel = &sanyo_2_5_in;
-	else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel = &epson_2_2_in;
-	else if (val == SYS_CLCD_ID_VGA)
-		panel = vga_panel;
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel = vga_panel;
-	}
-
-	return panel;
-}
-
 /*
  * Disable all display connectors on the interface module.
  */
@@ -565,56 +416,60 @@ static void realview_clcd_enable(struct clcd_fb *fb)
 	writel(val, sys_clcd);
 }
 
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
 static int realview_clcd_setup(struct clcd_fb *fb)
 {
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	const char *panel_name, *vga_panel_name;
 	unsigned long framesize;
-	dma_addr_t dma;
+	u32 val;
 
-	if (machine_is_realview_eb())
+	if (machine_is_realview_eb()) {
 		/* VGA, 16bpp */
 		framesize = 640 * 480 * 2;
-	else
+		vga_panel_name = "VGA";
+	} else {
 		/* XVGA, 16bpp */
 		framesize = 1024 * 768 * 2;
-
-	fb->panel		= realview_clcd_panel();
-
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-						    &dma, GFP_KERNEL | GFP_DMA);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
+		vga_panel_name = "XVGA";
 	}
 
-	fb->fb.fix.smem_start	= dma;
-	fb->fb.fix.smem_len	= framesize;
-
-	return 0;
-}
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel_name = "Sanyo TM38QV67A02A";
+	else if (val == SYS_CLCD_ID_SANYO_2_5)
+		panel_name = "Sanyo QVGA Portrait";
+	else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel_name = "Epson L2F50113T00";
+	else if (val == SYS_CLCD_ID_VGA)
+		panel_name = vga_panel_name;
+	else {
+		pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
+		panel_name = vga_panel_name;
+	}
 
-static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
-}
+	fb->panel = versatile_clcd_get_panel(panel_name);
+	if (!fb->panel)
+		return -EINVAL;
 
-static void realview_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
+	return versatile_clcd_setup_dma(fb, framesize);
 }
 
 struct clcd_board clcd_plat_data = {
 	.name		= "RealView",
+	.caps		= CLCD_CAP_ALL,
 	.check		= clcdfb_check,
 	.decode		= clcdfb_decode,
 	.disable	= realview_clcd_disable,
 	.enable		= realview_clcd_enable,
 	.setup		= realview_clcd_setup,
-	.mmap		= realview_clcd_mmap,
-	.remove		= realview_clcd_remove,
+	.mmap		= versatile_clcd_mmap_dma,
+	.remove		= versatile_clcd_remove_dma,
 };
 
 #ifdef CONFIG_LEDS
@@ -656,12 +511,6 @@ void realview_leds_event(led_event_t ledevt)
 #endif	/* CONFIG_LEDS */
 
 /*
- * The sched_clock counter
- */
-#define REFCOUNTER		(__io_address(REALVIEW_SYS_BASE) + \
-				 REALVIEW_SYS_24MHz_OFFSET)
-
-/*
  * Where is the timer (VA)?
  */
 void __iomem *timer0_va_base;
@@ -676,8 +525,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-	versatile_sched_clock_init(REFCOUNTER, 24000000);
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 693239ddc39..5c83d1e87a0 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -42,7 +42,6 @@ static struct amba_device name##_device = {			\
 	},							\
 	.dma_mask	= ~0,					\
 	.irq		= base##_IRQ,				\
-	/* .dma		= base##_DMA,*/				\
 }
 
 struct machine_desc;
@@ -63,6 +62,7 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
+extern void realview_init_early(void);
 extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
 			   char **from, struct meminfo *meminfo);
 extern void (*realview_reset)(char);
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
deleted file mode 100644
index b34be4554d4..00000000000
--- a/arch/arm/mach-realview/headsmp.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * Realview specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(realview_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-
-	.align
-1:	.long	.
-	.long	pen_release
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 5dafc157b27..e05fc2c4c08 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -24,9 +24,9 @@
  * Physical DRAM offset.
  */
 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PHYS_OFFSET		UL(0x70000000)
+#define PLAT_PHYS_OFFSET		UL(0x70000000)
 #else
-#define PHYS_OFFSET		UL(0x00000000)
+#define PLAT_PHYS_OFFSET		UL(0x00000000)
 #endif
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
deleted file mode 100644
index 60b4e111f45..00000000000
--- a/arch/arm/mach-realview/localtimer.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	evt->irq = IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-}
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 6959d13d908..23919229e12 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -10,44 +10,21 @@
  */
 #include <linux/init.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 
-#include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/smp_scu.h>
 #include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
 #include <mach/board-pbx.h>
-#include <asm/smp_scu.h>
 
 #include "core.h"
 
-extern void realview_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void __cpuinit write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
+extern void versatile_secondary_startup(void);
 
 static void __iomem *scu_base_addr(void)
 {
@@ -62,75 +39,6 @@ static void __iomem *scu_base_addr(void)
 		return (void __iomem *)0;
 }
 
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	write_pen_release(cpu);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	smp_cross_call(cpumask_of(cpu), 1);
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
 /*
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
@@ -174,6 +82,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+	__raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)),
 		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 6ef5c5e528b..10e75faba4c 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * These devices are connected via the core APB bridge
  */
 #define GPIO2_IRQ	{ IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO2_DMA	{ 0, 0 }
 #define GPIO3_IRQ	{ IRQ_EB_GPIO3, NO_IRQ }
-#define GPIO3_DMA	{ 0, 0 }
 
 #define AACI_IRQ	{ IRQ_EB_AACI, NO_IRQ }
-#define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define MMCI0_DMA	{ 0x84, 0 }
 #define KMI0_IRQ	{ IRQ_EB_KMI0, NO_IRQ }
-#define KMI0_DMA	{ 0, 0 }
 #define KMI1_IRQ	{ IRQ_EB_KMI1, NO_IRQ }
-#define KMI1_DMA	{ 0, 0 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
 #define EB_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define EB_SMC_DMA	{ 0, 0 }
 #define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA	{ 0, 0 }
 #define EB_CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
-#define EB_CLCD_DMA	{ 0, 0 }
 #define DMAC_IRQ	{ IRQ_EB_DMA, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
 
 /*
  * These devices are connected via the core APB bridge
  */
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA	{ 0, 0 }
 #define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
-#define EB_WATCHDOG_DMA	{ 0, 0 }
 #define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
-#define EB_GPIO0_DMA	{ 0, 0 }
 #define GPIO1_IRQ	{ IRQ_EB_GPIO1, NO_IRQ }
-#define GPIO1_DMA	{ 0, 0 }
 #define EB_RTC_IRQ	{ IRQ_EB_RTC, NO_IRQ }
-#define EB_RTC_DMA	{ 0, 0 }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
 #define SCI_IRQ		{ IRQ_EB_SCI, NO_IRQ }
-#define SCI_DMA		{ 7, 6 }
 #define EB_UART0_IRQ	{ IRQ_EB_UART0, NO_IRQ }
-#define EB_UART0_DMA	{ 15, 14 }
 #define EB_UART1_IRQ	{ IRQ_EB_UART1, NO_IRQ }
-#define EB_UART1_DMA	{ 13, 12 }
 #define EB_UART2_IRQ	{ IRQ_EB_UART2, NO_IRQ }
-#define EB_UART2_DMA	{ 11, 10 }
 #define EB_UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
-#define EB_UART3_DMA	{ 0x86, 0x87 }
 #define EB_SSP_IRQ	{ IRQ_EB_SSP, NO_IRQ }
-#define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
@@ -369,7 +348,7 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
 			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
@@ -484,9 +463,10 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
+	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,
 	.init_machine	= realview_eb_init,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cbdc97a5685..eab6070f66d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PB1176 AMBA devices
  */
 #define GPIO2_IRQ	{ IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO2_DMA	{ 0, 0 }
 #define GPIO3_IRQ	{ IRQ_PB1176_GPIO3, NO_IRQ }
-#define GPIO3_DMA	{ 0, 0 }
 #define AACI_IRQ	{ IRQ_PB1176_AACI, NO_IRQ }
-#define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define MMCI0_DMA	{ 0x84, 0 }
 #define KMI0_IRQ	{ IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI0_DMA	{ 0, 0 }
 #define KMI1_IRQ	{ IRQ_PB1176_KMI1, NO_IRQ }
-#define KMI1_DMA	{ 0, 0 }
 #define PB1176_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define PB1176_SMC_DMA	{ 0, 0 }
 #define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA	{ 0, 0 }
 #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
-#define PB1176_CLCD_DMA	{ 0, 0 }
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA	{ 0, 0 }
 #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_WATCHDOG_DMA	{ 0, 0 }
 #define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0, NO_IRQ }
-#define PB1176_GPIO0_DMA	{ 0, 0 }
 #define GPIO1_IRQ	{ IRQ_PB1176_GPIO1, NO_IRQ }
-#define GPIO1_DMA	{ 0, 0 }
 #define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC, NO_IRQ }
-#define PB1176_RTC_DMA	{ 0, 0 }
 #define SCI_IRQ		{ IRQ_PB1176_SCI, NO_IRQ }
-#define SCI_DMA		{ 7, 6 }
 #define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART0_DMA	{ 15, 14 }
 #define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART1_DMA	{ 13, 12 }
 #define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART2_DMA	{ 11, 10 }
 #define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART3_DMA	{ 0x86, 0x87 }
 #define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_UART4_DMA	{ 0, 0 }
 #define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
-#define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
@@ -379,9 +358,10 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
+	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,
 	.init_machine	= realview_pb1176_init,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 8e8ab7d29a6..b2985fc7cd4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  */
 
 #define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO2_DMA		{ 0, 0 }
 #define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3, NO_IRQ }
-#define GPIO3_DMA		{ 0, 0 }
 #define AACI_IRQ		{ IRQ_TC11MP_AACI, NO_IRQ }
-#define AACI_DMA		{ 0x80, 0x81 }
 #define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define MMCI0_DMA		{ 0x84, 0 }
 #define KMI0_IRQ		{ IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI0_DMA		{ 0, 0 }
 #define KMI1_IRQ		{ IRQ_TC11MP_KMI1, NO_IRQ }
-#define KMI1_DMA		{ 0, 0 }
 #define PB11MP_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PB11MP_SMC_DMA		{ 0, 0 }
 #define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA		{ 0, 0 }
 #define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD, NO_IRQ }
-#define PB11MP_CLCD_DMA		{ 0, 0 }
 #define DMAC_IRQ		{ IRQ_PB11MP_DMAC, NO_IRQ }
-#define DMAC_DMA		{ 0, 0 }
 #define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA		{ 0, 0 }
 #define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_WATCHDOG_DMA	{ 0, 0 }
 #define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0, NO_IRQ }
-#define PB11MP_GPIO0_DMA	{ 0, 0 }
 #define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1, NO_IRQ }
-#define GPIO1_DMA		{ 0, 0 }
 #define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC, NO_IRQ }
-#define PB11MP_RTC_DMA		{ 0, 0 }
 #define SCI_IRQ			{ IRQ_PB11MP_SCI, NO_IRQ }
-#define SCI_DMA			{ 7, 6 }
 #define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART0_DMA	{ 15, 14 }
 #define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART1_DMA	{ 13, 12 }
 #define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART2_DMA	{ 11, 10 }
 #define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_UART3_DMA	{ 0x86, 0x87 }
 #define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP, NO_IRQ }
-#define PB11MP_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
@@ -381,9 +360,10 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
+	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,
 	.init_machine	= realview_pb11mp_init,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 841118e3e11..fb686655876 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  */
 
 #define GPIO2_IRQ		{ IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO2_DMA		{ 0, 0 }
 #define GPIO3_IRQ		{ IRQ_PBA8_GPIO3, NO_IRQ }
-#define GPIO3_DMA		{ 0, 0 }
 #define AACI_IRQ		{ IRQ_PBA8_AACI, NO_IRQ }
-#define AACI_DMA		{ 0x80, 0x81 }
 #define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define MMCI0_DMA		{ 0x84, 0 }
 #define KMI0_IRQ		{ IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI0_DMA		{ 0, 0 }
 #define KMI1_IRQ		{ IRQ_PBA8_KMI1, NO_IRQ }
-#define KMI1_DMA		{ 0, 0 }
 #define PBA8_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBA8_SMC_DMA		{ 0, 0 }
 #define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA		{ 0, 0 }
 #define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD, NO_IRQ }
-#define PBA8_CLCD_DMA		{ 0, 0 }
 #define DMAC_IRQ		{ IRQ_PBA8_DMAC, NO_IRQ }
-#define DMAC_DMA		{ 0, 0 }
 #define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA		{ 0, 0 }
 #define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_WATCHDOG_DMA	{ 0, 0 }
 #define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0, NO_IRQ }
-#define PBA8_GPIO0_DMA		{ 0, 0 }
 #define GPIO1_IRQ		{ IRQ_PBA8_GPIO1, NO_IRQ }
-#define GPIO1_DMA		{ 0, 0 }
 #define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC, NO_IRQ }
-#define PBA8_RTC_DMA		{ 0, 0 }
 #define SCI_IRQ			{ IRQ_PBA8_SCI, NO_IRQ }
-#define SCI_DMA			{ 7, 6 }
 #define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART0_DMA		{ 15, 14 }
 #define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART1_DMA		{ 13, 12 }
 #define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART2_DMA		{ 11, 10 }
 #define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_UART3_DMA		{ 0x86, 0x87 }
 #define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP, NO_IRQ }
-#define PBA8_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
@@ -331,9 +310,10 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
+	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pba8_timer,
 	.init_machine	= realview_pba8_init,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 02b755b009d..92ace2cf2b2 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  */
 
 #define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO2_DMA		{ 0, 0 }
 #define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
-#define GPIO3_DMA		{ 0, 0 }
 #define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
-#define AACI_DMA		{ 0x80, 0x81 }
 #define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define MMCI0_DMA		{ 0x84, 0 }
 #define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
-#define KMI0_DMA		{ 0, 0 }
 #define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
-#define KMI1_DMA		{ 0, 0 }
 #define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBX_SMC_DMA		{ 0, 0 }
 #define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA		{ 0, 0 }
 #define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
-#define PBX_CLCD_DMA		{ 0, 0 }
 #define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
-#define DMAC_DMA		{ 0, 0 }
 #define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA		{ 0, 0 }
 #define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_WATCHDOG_DMA	{ 0, 0 }
 #define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
-#define PBX_GPIO0_DMA		{ 0, 0 }
 #define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
-#define GPIO1_DMA		{ 0, 0 }
 #define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
-#define PBX_RTC_DMA		{ 0, 0 }
 #define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
-#define SCI_DMA			{ 7, 6 }
 #define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART0_DMA		{ 15, 14 }
 #define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART1_DMA		{ 13, 12 }
 #define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART2_DMA		{ 11, 10 }
 #define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
-#define PBX_UART3_DMA		{ 0x86, 0x87 }
 #define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
-#define PBX_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
@@ -414,9 +393,10 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
+	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,
 	.init_machine	= realview_pbx_init,