ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/

This patch moves S3C2410 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile
- removed unused option, MACH_N35
- fixed duplcated option name, S3C2410_DMA to S3C24XX_DMA which is
  in plat-s3c24xx/

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 0 insertions, 154 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index ce620993bec..68d89cb96af 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,42 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C24XX
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
 # cpu frequency scaling support
 
 config S3C2410_CPUFREQ
@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
 	help
 	  Select the PLL table for the S3C2410
 
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select CPU_S3C2410
-	select MACH_SMDK
-	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select CPU_S3C2410
-	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C2410_SETUP_TS
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-        tristate "Control the state of H1940 bluetooth chip"
-        depends on ARCH_H1940
-        select RFKILL
-        help
-          This is a simple driver that is able to control
-          the state of built in bluetooth chip on h1940.
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-config MACH_N30
-	bool "Acer N30 family"
-	select CPU_S3C2410
-	select MACH_N35
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
-	bool
-	help
-	  Internal node in order to enable support for Acer N35 if Acer N30 is
-	  selected.
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select PM_SIMTEC if PM
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
-	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the TinCanTools Hammer Board
-           <http://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select PM_SIMTEC if PM
-	select S3C24XX_DCLK
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
-	bool "QT2410"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	   Say Y here if you are using the Armzone QT2410
-
-endmenu