Merge branch 'master' into for-2.6.35

Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 73 insertions, 10 deletions

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 684710f8814..41f299d983e 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,6 +26,7 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -46,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/mci.h>
 #include <plat/s3c2410.h>
 #include <plat/udc.h>
 
@@ -86,10 +88,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
+		gpio_set_value(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
+		gpio_set_value(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -172,8 +174,10 @@ static struct gpio_keys_button n35_buttons[] = {
 	{
 		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
+		.type		= EV_PWR,
 		.desc		= "Power",
 		.active_low	= 0,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= S3C2410_GPG(9),
@@ -264,6 +268,14 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.def_trigger	= "",
 };
 
+/* This is the blue LED on the device. Originaly used to indicate GPS activity
+ * by flashing. */
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+	.name		= "blue_led",
+	.gpio		= S3C2410_GPD(8),
+	.def_trigger	= "",
+};
+
 /* This LED is driven by the battery microcontroller, and is blinking
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
@@ -275,6 +287,13 @@ static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.def_trigger	= "",
 };
 
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+	.name		= "warning_led",
+	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.gpio		= S3C2410_GPD(9),
+	.def_trigger	= "",
+};
+
 static struct platform_device n30_blue_led = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
@@ -283,6 +302,14 @@ static struct platform_device n30_blue_led = {
 	},
 };
 
+static struct platform_device n35_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n35_blue_led_pdata,
+	},
+};
+
 static struct platform_device n30_warning_led = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
@@ -291,6 +318,14 @@ static struct platform_device n30_warning_led = {
 	},
 };
 
+static struct platform_device n35_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n35_warning_led_pdata,
+	},
+};
+
 static struct s3c2410fb_display n30_display __initdata = {
 	.type		= S3C2410_LCDCON1_TFT,
 	.width		= 240,
@@ -317,13 +352,36 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 	.lpcsel		= 0x06,
 };
 
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		gpio_set_value(S3C2410_GPG(4), 1);
+		break;
+	case MMC_POWER_OFF:
+	default:
+		gpio_set_value(S3C2410_GPG(4), 0);
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+	.gpio_detect	= S3C2410_GPF(1),
+	.gpio_wprotect  = S3C2410_GPG(10),
+	.ocr_avail	= MMC_VDD_32_33,
+	.set_power	= n30_sdi_set_power,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_ohci,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n30_button_device,
 	&n30_blue_led,
 	&n30_warning_led,
@@ -334,8 +392,12 @@ static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n35_button_device,
+	&n35_blue_led,
+	&n35_warning_led,
 };
 
 static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
@@ -490,17 +552,15 @@ static void __init n30_map_io(void)
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 }
 
-static void __init n30_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
 {
+	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
 	s3c24xx_fb_set_platdata(&n30_fb_info);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c24xx_mci_set_platdata(&n30_mci_cfg);
 	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
@@ -532,10 +592,13 @@ static void __init n30_init(void)
 		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND1);
+				      S3C2410_MISCCR_USBSUSPND0);
 
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
+
+	WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
+	gpio_direction_output(S3C2410_GPB(3), 0);
 }
 
 MACHINE_START(N30, "Acer-N30")
@@ -547,7 +610,7 @@ MACHINE_START(N30, "Acer-N30")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
 
@@ -559,6 +622,6 @@ MACHINE_START(N35, "Acer-N35")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END