[ARM] S3C24XX: Add physmap device for all Simtec NOR equiped boards.

Move to using the physmap platform device code to attached NOR
flash on Simtec boards so that the old bast-flash driver can be
safely removed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 86 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
new file mode 100644
index 00000000000..f44e21b9c3b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-cpld.h>
+
+
+static void simtec_nor_vpp(struct map_info *map, int vpp)
+{
+	unsigned int val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = __raw_readb(BAST_VA_CTRL3);
+
+	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+	if (vpp)
+		val |= BAST_CPLD_CTRL3_ROMWEN;
+	else
+		val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+	__raw_writeb(val, BAST_VA_CTRL3);
+	local_irq_restore(flags);
+}
+
+struct physmap_flash_data simtec_nor_pdata = {
+	.width		= 2,
+	.set_vpp	= simtec_nor_vpp,
+	.nr_parts	= 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+	[0] = {
+		.start = S3C2410_CS1 + 0x4000000,
+		.end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device simtec_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
+	.resource	= simtec_nor_resource,
+	.dev		= {
+		.platform_data = &simtec_nor_pdata,
+	},
+};
+
+void __init nor_simtec_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&simtec_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+	else
+		simtec_nor_vpp(NULL, 1);
+}