Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	arch/x86/kernel/io_apic.c

28 files changed, 151 insertions, 498 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 99fdc736698..63a30d1dd42 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -7,6 +7,7 @@
 config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
@@ -32,11 +33,6 @@ config S3C2410_GPIO
 	help
 	  GPIO code for S3C2410 and similar processors
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
 config SIMTEC_NOR
 	bool
 	help
@@ -84,6 +80,7 @@ config ARCH_BAST
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
+	select S3C24XX_DCLK
 	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -121,6 +118,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select PM_SIMTEC if PM
+	select S3C24XX_DCLK
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 00f31f8c4e7..fca02f82711 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
deleted file mode 100644
index 4e07943c1e2..00000000000
--- a/arch/arm/mach-s3c2410/clock.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/s3c2410.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	},
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 7d914a470b6..552b4c778fd 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,7 +17,6 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
@@ -25,12 +24,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 	[DMACH_XD0] = {
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 891b53cd69b..13358ce2128 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -16,11 +16,6 @@
 #include <linux/sysdev.h>
 #include <mach/hardware.h>
 
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS		0x40000000
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
 /* We use `virtual` dma channels to hide the fact we have only a limited
@@ -254,7 +249,7 @@ typedef unsigned long dma_device_t;
  * request a dma channel exclusivley
 */
 
-extern int s3c2410_dma_request(dmach_t channel,
+extern int s3c2410_dma_request(unsigned int channel,
 			       struct s3c2410_dma_client *, void *dev);
 
 
@@ -263,14 +258,14 @@ extern int s3c2410_dma_request(dmach_t channel,
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
  * set the channel's flags to a given state
 */
 
-extern int s3c2410_dma_setflags(dmach_t channel,
+extern int s3c2410_dma_setflags(unsigned int channel,
 				unsigned int flags);
 
 /* s3c2410_dma_free
@@ -278,7 +273,7 @@ extern int s3c2410_dma_setflags(dmach_t channel,
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -287,7 +282,7 @@ extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
  * drained before the buffer is given to the DMA system.
 */
 
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			       dma_addr_t data, int size);
 
 /* s3c2410_dma_config
@@ -295,7 +290,7 @@ extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
  * configure the dma channel
 */
 
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
 
 /* s3c2410_dma_devconfig
  *
@@ -310,11 +305,11 @@ extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
  * get the position that the dma transfer is currently at
 */
 
-extern int s3c2410_dma_getposition(dmach_t channel,
+extern int s3c2410_dma_getposition(unsigned int channel,
 				   dma_addr_t *src, dma_addr_t *dest);
 
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
 
 /* DMA Register definitions */
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
new file mode 100644
index 00000000000..6c9fbb99ef1
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -0,0 +1,34 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <plat/gpio-core.h>
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip;
+
+	if (pin > S3C2410_GPG10)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 3b52b86498a..e0349af8a48 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -15,4 +15,10 @@
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 950c71bf148..9565903d490 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -134,6 +134,8 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
 #define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
@@ -160,6 +162,12 @@
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
+/* compatibility define. */
+#define IRQ_UART3		IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 23c470c2e5b..255fdfeaf95 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)		S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA	   (0x4B000000)
 #define S3C24XX_SZ_DMA	   SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD	   (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC	   (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -152,27 +92,16 @@
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
 #define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
index 93782628a78..6f1e5871ae4 100644
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -13,7 +13,4 @@
 
 #define PHYS_OFFSET	UL(0x30000000)
 
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index b3f90aa7807..2a5d90e957f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -42,13 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK	     3
-
 /* DCLKCON register addresses in gpio.h */
 
 #define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
@@ -76,32 +69,6 @@
 #define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
 #define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
 
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2410_PLLCON_MDIVMASK;
-	pdiv &= S3C2410_PLLCON_PDIVMASK;
-	sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
 /* extra registers */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 528080ceac4..32107761306 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1053,13 +1053,6 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
 /* interrupt filtering conrrol for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 46d46f5b99f..774f3adfe8a 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+						 int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+					      int enable);
 
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 43535a0e718..7613d0a384b 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -13,7 +13,7 @@
 #include <mach/hardware.h>
 #include <linux/io.h>
 
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
 #include <mach/regs-clock.h>
 
 #include <linux/clk.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h
new file mode 100644
index 00000000000..544da41979d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - timer tick support
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
deleted file mode 100644
index 2a425ed0a7e..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index ab39491beee..c9432103750 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,3 +1,4 @@
+
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
deleted file mode 100644
index 315b0078a34..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index d061fea0190..6d6995afeb4 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -52,6 +52,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
 	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
 #endif
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8db9c700e3c..01bd76725b9 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -44,8 +44,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
  * standard 100KHz i2c bus frequency
 */
 
-static struct s3c2410_platform_i2c bast_i2c_info = {
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.bus_freq	= 100*1000,
@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
 	&bast_device_dm9k,
@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
-	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
+
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 98716d0108e..821a1668c3a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -38,11 +38,13 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/pll.h>
 #include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
@@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&s3c_device_leds,
@@ -215,6 +217,7 @@ static void __init h1940_init(void)
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -223,10 +226,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp = (
-		 0x78 << S3C2410_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
+	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
+	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 82505517846..05a5e877b49 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -40,14 +39,14 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/s3c2410.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
@@ -320,7 +319,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usb,
 	&s3c_device_usbgadget,
@@ -332,7 +331,7 @@ static struct platform_device *n30_devices[] __initdata = {
 static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&n35_button_device,
@@ -501,7 +500,7 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
 	/* Turn off suspend on both USB ports, and switch the
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8255cf87e4..f6c7261a4a1 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -35,6 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
+#include <plat/iic.h>
 #include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
  	&s3c_device_rtc,
 	&otom_device_nor,
@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
 
 static void __init otom11_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 661807e14e8..9678a53ceeb 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -50,10 +50,11 @@
 #include <mach/leds-gpio.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/nand.h>
+#include <plat/udc.h>
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
+#include <plat/iic.h>
 
 #include <plat/common-smdk.h>
 #include <plat/devs.h>
@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 152527bb287..c49126ccb1d 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -47,6 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 };
 
@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
 
 static void __init smdk2410_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 309dcf4c870..8fdb0430bd4 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -45,6 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
 static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
 
 static void __init tct_hammer_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 941353af16d..61a1ea9c5c5 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -47,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_adc,
 	&serial_device,
 	&vr1000_dm9k0,
@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
 
 static void __init vr1000_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index ac79b536c4c..feb141b1f91 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -28,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 
@@ -35,6 +38,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/pll.h>
 
 /* Initial IO mappings */
 
@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
 */
 
-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2410_map_io(void)
 {
-	/* register our io-tables */
-
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2410_init_clocks(int xtal)
+void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long tmp;
+	unsigned long xtal;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
 	/* now we've got our machine bits initialised, work out what
 	 * clocks we've got */
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
 
 	tmp = __raw_readl(S3C2410_CLKDIVN);
 
@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
 	 * console to use them
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c24xx_register_baseclocks(xtal);
+	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
 }