ARM: config: sort select statements alphanumerically

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 41 insertions, 41 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7f2b2..2b6cb5f29c2 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,10 +17,10 @@ config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
 	select CPU_ARM920T
-	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
+	select S3C2410_CLOCK
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	select S3C2410_PM if PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@ config CPU_S3C2412
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C24XX_DMA
+	select S3C2412_PM if PM
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -40,10 +40,10 @@ config CPU_S3C2416
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
+	select S3C2416_PM if PM
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
-	select S3C2416_PM if PM
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -75,9 +75,9 @@ config CPU_S3C2443
 	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -156,16 +156,16 @@ config MACH_AML_M5900
 
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
+	select ISA
+	select MACH_BAST_IDE
 	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
 	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -181,9 +181,9 @@ config BAST_PC104_IRQ
 config ARCH_H1940
 	bool "IPAQ H1940"
 	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
 	select S3C24XX_SETUP_TS
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -203,23 +203,23 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select MACH_N35
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config MACH_OTOM
 	bool "NexVision OTOM Board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision OTOM board
 
 config MACH_QT2410
 	bool "QT2410"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Armzone QT2410
 
@@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
-	select S3C24XX_SIMTEC_PM if PM
+	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
@@ -285,8 +285,8 @@ comment "S3C2412 Boards"
 
 config MACH_JIVE
 	bool "Logitech Jive"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -314,15 +314,15 @@ config MACH_SMDK2413
 	bool "SMDK2413"
 	select MACH_S3C2413
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
 config MACH_VSTMS
 	bool "VMSTMS"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
@@ -351,13 +351,13 @@ comment "S3C2416 Boards"
 
 config MACH_SMDK2416
 	bool "SMDK2416"
+	select S3C2416_SETUP_SDHCI
 	select S3C24XX_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
 	help
 	  Say Y here if you are using an SMDK2416
 
@@ -379,11 +379,11 @@ comment "S3C2440 Boards"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
 	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
 	select S3C2440_XTAL_12000000
+	select S3C24XX_DCLK
+	select S3C24XX_GPIO_EXTRA64
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@ config MACH_ANUBIS
 
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
 	select EEPROM_AT24
-	select NEW_LEDS
 	select LEDS_CLASS
 	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
+	select NEW_LEDS
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	help
@@ -412,20 +412,20 @@ config MACH_MINI2440
 config MACH_NEXCODER_2440
 	bool "NexVision NEXCODER 2440 Light Board"
 	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
 
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
-	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C2440_XTAL_16934400
 	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select S3C2440_XTAL_16934400
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -478,11 +478,11 @@ comment "S3C2442 Boards"
 
 config MACH_NEO1973_GTA02
 	bool "Openmoko GTA02 / Freerunner phone"
+	select I2C
+	select MACH_NEO1973
 	select MFD_PCF50633
 	select PCF50633_GPIO
-	select I2C
 	select POWER_SUPPLY
-	select MACH_NEO1973
 	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
@@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
 	select I2C
-	select S3C24XX_PWM
-	select S3C_DEV_NAND
+	select PM_H1940 if PM
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
+	select S3C24XX_DCLK
+	select S3C24XX_PWM
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you're using HP iPAQ rx1950