Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 00000000000..959df3840de
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,180 @@
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM831X
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT