ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410

As per discussions with Russell King on linux-arm-kernel, it appears that
both mach-s3c6400 and mach-s3c6410 are so close together that they should
simply be merged into mach-s3c64xx.

Note, this patch does not eliminate any of the bits that are still common,
it is simply a move of the two directories together, any further common
code will be eliminated or moved in further patches.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 39 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b18ac5266df
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>