Merge branch 'linus' into tracing/hw-breakpoints

Conflicts:
	arch/x86/kernel/process_64.c

Semantic conflict fixed in:
	arch/x86/kvm/x86.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 files changed, 537 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR	(8)
+#define S5PC1XX_GPIO_A1_NR	(5)
+#define S5PC1XX_GPIO_B_NR	(8)
+#define S5PC1XX_GPIO_C_NR	(5)
+#define S5PC1XX_GPIO_D_NR	(7)
+#define S5PC1XX_GPIO_E0_NR	(8)
+#define S5PC1XX_GPIO_E1_NR	(6)
+#define S5PC1XX_GPIO_F0_NR	(8)
+#define S5PC1XX_GPIO_F1_NR	(8)
+#define S5PC1XX_GPIO_F2_NR	(8)
+#define S5PC1XX_GPIO_F3_NR	(4)
+#define S5PC1XX_GPIO_G0_NR	(8)
+#define S5PC1XX_GPIO_G1_NR	(3)
+#define S5PC1XX_GPIO_G2_NR	(7)
+#define S5PC1XX_GPIO_G3_NR	(7)
+#define S5PC1XX_GPIO_H0_NR	(8)
+#define S5PC1XX_GPIO_H1_NR	(8)
+#define S5PC1XX_GPIO_H2_NR	(8)
+#define S5PC1XX_GPIO_H3_NR	(8)
+#define S5PC1XX_GPIO_I_NR	(8)
+#define S5PC1XX_GPIO_J0_NR	(8)
+#define S5PC1XX_GPIO_J1_NR	(5)
+#define S5PC1XX_GPIO_J2_NR	(8)
+#define S5PC1XX_GPIO_J3_NR	(8)
+#define S5PC1XX_GPIO_J4_NR	(4)
+#define S5PC1XX_GPIO_K0_NR	(8)
+#define S5PC1XX_GPIO_K1_NR	(6)
+#define S5PC1XX_GPIO_K2_NR	(8)
+#define S5PC1XX_GPIO_K3_NR	(8)
+#define S5PC1XX_GPIO_MP00_NR	(8)
+#define S5PC1XX_GPIO_MP01_NR	(8)
+#define S5PC1XX_GPIO_MP02_NR	(8)
+#define S5PC1XX_GPIO_MP03_NR	(8)
+#define S5PC1XX_GPIO_MP04_NR	(5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S5PC1XX_GPIO_A0_START 	= 0,
+	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END		S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..6b38618c2fd
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID	(0xE0000000)
+#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS		(0xE0100000)
+#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_VA_VIC		S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET	0x100000
+#define S5PC100_VA_VIC_OFFSET	0x10000
+#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER	(0xEA000000)
+#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC1XX_PA_UART		S5PC100_PA_UART
+#define S5PC1XX_VA_UART		S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC		(0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM	(0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART		S5PC100_PA_UART
+#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
+#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
+#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
+#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET		0x400
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC		S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */