Merge remote-tracking branch 'linus/master' into x86/urgent

16 files changed, 467 insertions, 654 deletions

diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e538a4c67e9..75a26eaf263 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -45,6 +45,11 @@ config S5PC100_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
+config S5PC100_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations.
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a5e6e608b49..118c711f74e 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -9,28 +9,24 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for S5PC100 system
+# Core
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o
-obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
-obj-$(CONFIG_CPU_S5PC100)	+= dma.o
+obj-y				+= common.o clock.o
 
-# Helper and device support
-
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-y				+= dma.o
 
 # machine support
 
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
 
 # device support
+
 obj-y				+= dev-audio.o
+
+obj-y					+= setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S5PC100_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 8d47709da71..247194dd366 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -27,7 +27,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5pc100.h>
+
+#include "common.h"
 
 static struct clk s5p_clk_otgphy = {
 	.name		= "otg_phy",
@@ -426,24 +427,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5pc100_d0_2_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
 		.name		= "modemif",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
@@ -673,24 +656,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "spi_48m",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "spi_48m",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "spi_48m",
-		.devname	= "s3c64xx-spi.2",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
 		.name		= "mmc_48m",
 		.devname	= "s3c-sdhci.0",
 		.parent		= &clk_mout_48m.clk,
@@ -711,6 +676,54 @@ static struct clk init_clocks_off[] = {
 	},
 };
 
+static struct clk clk_hsmmc2 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.2",
+	.parent		= &clk_div_d1_bus.clk,
+	.enable		= s5pc100_d1_0_ctrl,
+	.ctrlbit	= (1 << 7),
+};
+
+static struct clk clk_hsmmc1 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.1",
+	.parent		= &clk_div_d1_bus.clk,
+	.enable		= s5pc100_d1_0_ctrl,
+	.ctrlbit	= (1 << 6),
+};
+
+static struct clk clk_hsmmc0 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.0",
+	.parent		= &clk_div_d1_bus.clk,
+	.enable		= s5pc100_d1_0_ctrl,
+	.ctrlbit	= (1 << 5),
+};
+
+static struct clk clk_48m_spi0 = {
+	.name		= "spi_48m",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_mout_48m.clk,
+	.enable		= s5pc100_sclk0_ctrl,
+	.ctrlbit	= (1 << 7),
+};
+
+static struct clk clk_48m_spi1 = {
+	.name		= "spi_48m",
+	.devname	= "s3c64xx-spi.1",
+	.parent		= &clk_mout_48m.clk,
+	.enable		= s5pc100_sclk0_ctrl,
+	.ctrlbit	= (1 << 8),
+};
+
+static struct clk clk_48m_spi2 = {
+	.name		= "spi_48m",
+	.devname	= "s3c64xx-spi.2",
+	.parent		= &clk_mout_48m.clk,
+	.enable		= s5pc100_sclk0_ctrl,
+	.ctrlbit	= (1 << 9),
+};
+
 static struct clk clk_vclk54m = {
 	.name		= "vclk_54m",
 	.rate		= 54000000,
@@ -929,49 +942,6 @@ static struct clksrc_clk clk_sclk_spdif = {
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.0",
-			.ctrlbit	= (1 << 4),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.1",
-			.ctrlbit	= (1 << 5),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.2",
-			.ctrlbit	= (1 << 6),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit	= (1 << 3),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_mixer",
 			.ctrlbit	= (1 << 6),
 			.enable		= s5pc100_sclk0_ctrl,
@@ -1024,39 +994,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.0",
-			.ctrlbit	= (1 << 12),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_mmc0,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.1",
-			.ctrlbit	= (1 << 13),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_mmc12,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.2",
-			.ctrlbit	= (1 << 14),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_mmc12,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_irda",
 			.ctrlbit	= (1 << 10),
 			.enable		= s5pc100_sclk0_ctrl,
@@ -1098,6 +1035,89 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+static struct clksrc_clk clk_sclk_uart = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 3),
+		.enable		= s5pc100_sclk0_ctrl,
+	},
+	.sources = &clk_src_group2,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.0",
+		.ctrlbit	= (1 << 12),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_mmc0,
+	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.1",
+		.ctrlbit	= (1 << 13),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_mmc12,
+	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.2",
+		.ctrlbit	= (1 << 14),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_mmc12,
+	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.0",
+		.ctrlbit	= (1 << 4),
+		.enable		= s5pc100_sclk0_ctrl,
+	},
+	.sources = &clk_src_group1,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.1",
+		.ctrlbit	= (1 << 5),
+		.enable		= s5pc100_sclk0_ctrl,
+	},
+	.sources = &clk_src_group1,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.2",
+		.ctrlbit	= (1 << 6),
+		.enable		= s5pc100_sclk0_ctrl,
+	},
+	.sources = &clk_src_group1,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+};
+
 /* Clock initialisation code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1127,6 +1147,25 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_spdif,
 };
 
+static struct clk *clk_cdev[] = {
+	&clk_hsmmc0,
+	&clk_hsmmc1,
+	&clk_hsmmc2,
+	&clk_48m_spi0,
+	&clk_48m_spi1,
+	&clk_48m_spi2,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uart,
+	&clk_sclk_mmc0,
+	&clk_sclk_mmc1,
+	&clk_sclk_mmc2,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+	&clk_sclk_spi2,
+};
+
 void __init_or_cpufreq s5pc100_setup_clocks(void)
 {
 	unsigned long xtal;
@@ -1266,6 +1305,24 @@ static struct clk *clks[] __initdata = {
 	&clk_pcmcdclk1,
 };
 
+static struct clk_lookup s5pc100_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
+	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+};
+
 void __init s5pc100_register_clocks(void)
 {
 	int ptr;
@@ -1277,9 +1334,16 @@ void __init s5pc100_register_clocks(void)
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
+
+	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+		s3c_disable_clocks(clk_cdev[ptr], 1);
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
 
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/common.c
index fd2708e7d8a..c9095730a7f 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -1,17 +1,16 @@
-/* linux/arch/arm/mach-s5pc100/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Based on mach-s3c6410/cpu.c
+ * Common Codes for S5PC100
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -21,40 +20,78 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
 #include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
+#include <mach/hardware.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/ata-core.h>
-#include <plat/iic-core.h>
 #include <plat/sdhci.h>
 #include <plat/adc-core.h>
-#include <plat/onenand-core.h>
+#include <plat/ata-core.h>
 #include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
 
-#include <plat/s5pc100.h>
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S5PC100_CPU_ID,
+		.idmask		= S5PC100_CPU_MASK,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
 
 /* Initial IO mappings */
 
 static struct map_desc s5pc100_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC100_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC100_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S5PC100_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
 		.length		= SZ_16K,
@@ -100,15 +137,27 @@ static void s5pc100_idle(void)
 	local_irq_enable();
 }
 
-/* s5pc100_map_io
+/*
+ * s5pc100_map_io
  *
- * register the standard cpu IO areas
-*/
+ * register the standard CPU IO areas
+ */
 
-void __init s5pc100_map_io(void)
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
 {
+	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
 
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pc100_map_io(void)
+{
 	/* initialise device information early */
 	s5pc100_default_sdhci0();
 	s5pc100_default_sdhci1();
@@ -143,19 +192,19 @@ void __init s5pc100_init_irq(void)
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-static struct sysdev_class s5pc100_sysclass = {
-	.name	= "s5pc100-core",
+static struct bus_type s5pc100_subsys = {
+	.name		= "s5pc100-core",
+	.dev_name	= "s5pc100-core",
 };
 
-static struct sys_device s5pc100_sysdev = {
-	.cls	= &s5pc100_sysclass,
+static struct device s5pc100_dev = {
+	.bus	= &s5pc100_subsys,
 };
 
 static int __init s5pc100_core_init(void)
 {
-	return sysdev_class_register(&s5pc100_sysclass);
+	return subsys_system_register(&s5pc100_subsys, NULL);
 }
-
 core_initcall(s5pc100_core_init);
 
 int __init s5pc100_init(void)
@@ -165,5 +214,20 @@ int __init s5pc100_init(void)
 	/* set idle function */
 	pm_idle = s5pc100_idle;
 
-	return sysdev_register(&s5pc100_sysdev);
+	return device_register(&s5pc100_dev);
+}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void s5pc100_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	soft_restart(0);
 }
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
new file mode 100644
index 00000000000..9fbd3ae2b40
--- /dev/null
+++ b/arch/arm/mach-s5pc100/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+void s5pc100_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
deleted file mode 100644
index e5d6c4dceb5..00000000000
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
-
-static char *spi_src_clks[] = {
-	[S5PC100_SPI_SRCCLK_PCLK] = "pclk",
-	[S5PC100_SPI_SRCCLK_48M] = "spi_48m",
-	[S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
-				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-		break;
-
-	case 1:
-		s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
-				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-		break;
-
-	case 2:
-		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
-				      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5pc100_spi0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_SPI0,
-		.end   = S5PC100_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
-	.cfg_gpio = s5pc100_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 13,
-	.high_speed = 1,
-	.tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5pc100_spi0_resource),
-	.resource	  = s5pc100_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_spi0_pdata,
-	},
-};
-
-static struct resource s5pc100_spi1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_SPI1,
-		.end   = S5PC100_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
-	.cfg_gpio = s5pc100_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 13,
-	.high_speed = 1,
-	.tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_spi1_resource),
-	.resource	  = s5pc100_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_spi1_pdata,
-	},
-};
-
-static struct resource s5pc100_spi2_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_SPI2,
-		.end   = S5PC100_PA_SPI2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI2_TX,
-		.end   = DMACH_SPI2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI2_RX,
-		.end   = DMACH_SPI2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI2,
-		.end   = IRQ_SPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
-	.cfg_gpio = s5pc100_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 13,
-	.high_speed = 1,
-	.tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi2 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s5pc100_spi2_resource),
-	.resource	  = s5pc100_spi2_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_spi2_pdata,
-	},
-};
-
-void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5pc100_spi0_pdata;
-		break;
-	case 1:
-		pd = &s5pc100_spi1_pdata;
-		break;
-	case 2:
-		pd = &s5pc100_spi2_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 065a087f5a8..c841f4d313f 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,100 +35,42 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri pdma0_peri[30] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_IRDA,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_AC97_MICIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMOUT,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_EXTERNAL,
-	}, {
-		.peri_id = (u8)DMACH_PWM,
-	}, {
-		.peri_id = (u8)DMACH_SPDIF,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_HSI_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_HSI_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma0_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
 };
 
 struct dma_pl330_platdata s5pc100_pdma0_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri = pdma0_peri,
+	.peri_id = pdma0_peri,
 };
 
 struct amba_device s5pc100_device_pdma0 = {
@@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = {
 	.periphid = 0x00041330,
 };
 
-struct dma_pl330_peri pdma1_peri[30] = {
-	{
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = DMACH_IRDA,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ0,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ1,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ2,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ3,
-	},
+u8 pdma1_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MSM_REQ0,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ3,
 };
 
 struct dma_pl330_platdata s5pc100_pdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri = pdma1_peri,
+	.peri_id = pdma1_peri,
 };
 
 struct amba_device s5pc100_device_pdma1 = {
@@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = {
 
 static int __init s5pc100_dma_init(void)
 {
+	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
 	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+
+	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
 	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index ba76af052c8..b8c242edfa2 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,39 +12,14 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
 	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index d2eb4757381..2870f12c792 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,6 +97,8 @@
 #define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
 #define IRQ_VIC_END		S5P_IRQ_VIC2(31)
 
+#define IRQ_TIMER_BASE		(11)
+
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index ccbe6b767f7..54bc4f82e17 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -100,6 +100,9 @@
 #define S3C_PA_USB_HSOTG		S5PC100_PA_USB_HSOTG
 #define S3C_PA_USB_HSPHY		S5PC100_PA_USB_HSPHY
 #define S3C_PA_WDT			S5PC100_PA_WATCHDOG
+#define S3C_PA_SPI0			S5PC100_PA_SPI0
+#define S3C_PA_SPI1			S5PC100_PA_SPI1
+#define S3C_PA_SPI2			S5PC100_PA_SPI2
 
 #define S5P_PA_CHIPID			S5PC100_PA_CHIPID
 #define S5P_PA_FIMC0			S5PC100_PA_FIMC0
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index a9ea57c0660..afc96c29851 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
deleted file mode 100644
index 44c8e5726d9..00000000000
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c
deleted file mode 100644
index 19d7b523c13..00000000000
--- a/arch/arm/mach-s5pc100/init.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 26f5c91c942..674d22992f3 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -42,7 +43,6 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/s5pc100.h>
 #include <plat/fb.h>
 #include <plat/iic.h>
 #include <plat/ata.h>
@@ -53,6 +53,8 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -215,7 +217,7 @@ static struct platform_pwm_backlight_data smdkc100_bl_data = {
 
 static void __init smdkc100_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pc100_init_io(NULL, 0);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
 }
@@ -250,7 +252,9 @@ MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s5pc100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
deleted file mode 100644
index 6418c6e8a7b..00000000000
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
- *
- * Copyright 2008 Samsung Electronics
- *
- * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * Based on mach-s3c6410/setup-sdhci.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s5pc100_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",		/* HCLK */
-	/* [1] = "hsmmc",	- duplicate HCLK entry */
-	[2] = "sclk_mmc",	/* mmc_bus */
-	/* [3] = "48m",		- note not successfully used yet */
-};
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
new file mode 100644
index 00000000000..431a6f747ca
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-spi.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.high_speed	= 1,
+	.tx_st_done	= 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.high_speed	= 1,
+	.tx_st_done	= 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.high_speed	= 1,
+	.tx_st_done	= 21,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+	s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+				S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif