Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

10 files changed, 190 insertions, 85 deletions

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 53aabef1e9c..37b5a97594a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -13,6 +13,7 @@ config CPU_S5PV210
 	bool
 	select S3C_PL330_DMA
 	select S5P_EXT_INT
+	select S5P_HRT
 	select S5PV210_PM if PM
 	help
 	  Enable S5PV210 CPU support
@@ -53,6 +54,11 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
+config S5PV210_SETUP_FIMC
+	bool
+	help
+	  Common setup code for the camera interfaces.
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -130,6 +136,7 @@ config MACH_SMDKV210
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_IDE
 	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ff1a0db57a2..11f17907b4e 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -31,6 +31,7 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
 obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
 obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
index ab673effd76..1ba20a703e0 100644
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ b/arch/arm/mach-s5pv210/gpiolib.c
@@ -281,6 +281,7 @@ static __init int s5pv210_gpiolib_init(void)
 	}
 
 	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 4c45b74def5..78925c51634 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -146,6 +146,10 @@
 #define S5P_OM_STAT		S5P_CLKREG(0xE100)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
+#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
+#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
+#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
@@ -161,7 +165,6 @@
 #define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
-#define S5P_MIPI_DPHY_CONTROL	S5P_CLKREG(0xE814)
 
 #define S5P_IDLE_CFG_TL_MASK	(3 << 30)
 #define S5P_IDLE_CFG_TM_MASK	(3 << 28)
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 557add4fc56..4e1d8ff5ae5 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -39,6 +39,7 @@
 #include <plat/fb.h>
 #include <plat/fimc-core.h>
 #include <plat/sdhci.h>
+#include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define AQUILA_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -296,13 +297,11 @@ static struct regulator_init_data aquila_ldo17_data = {
 };
 
 /* BUCK */
-static struct regulator_consumer_supply buck1_consumer[] = {
-	{	.supply	= "vddarm", },
-};
+static struct regulator_consumer_supply buck1_consumer =
+	REGULATOR_SUPPLY("vddarm", NULL);
 
-static struct regulator_consumer_supply buck2_consumer[] = {
-	{	.supply	= "vddint", },
-};
+static struct regulator_consumer_supply buck2_consumer =
+	REGULATOR_SUPPLY("vddint", NULL);
 
 static struct regulator_init_data aquila_buck1_data = {
 	.constraints	= {
@@ -313,8 +312,8 @@ static struct regulator_init_data aquila_buck1_data = {
 		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
 				  REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
-	.consumer_supplies	= buck1_consumer,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck1_consumer,
 };
 
 static struct regulator_init_data aquila_buck2_data = {
@@ -326,8 +325,8 @@ static struct regulator_init_data aquila_buck2_data = {
 		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
 				  REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
-	.consumer_supplies	= buck2_consumer,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck2_consumer,
 };
 
 static struct regulator_init_data aquila_buck3_data = {
@@ -391,26 +390,14 @@ static struct max8998_platform_data aquila_max8998_pdata = {
 #endif
 
 static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
-	{
-		.dev_name	= "5-001a",
-		.supply		= "DBVDD",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "AVDD2",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "CPVDD",
-	},
+	REGULATOR_SUPPLY("DBVDD", "5-001a"),
+	REGULATOR_SUPPLY("AVDD2", "5-001a"),
+	REGULATOR_SUPPLY("CPVDD", "5-001a"),
 };
 
 static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
-	{
-		.dev_name	= "5-001a",
-		.supply		= "SPKVDD1",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "SPKVDD2",
-	},
+	REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
+	REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
 };
 
 static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
@@ -459,15 +446,11 @@ static struct platform_device wm8994_fixed_voltage1 = {
 	},
 };
 
-static struct regulator_consumer_supply wm8994_avdd1_supply = {
-	.dev_name	= "5-001a",
-	.supply		= "AVDD1",
-};
+static struct regulator_consumer_supply wm8994_avdd1_supply =
+	REGULATOR_SUPPLY("AVDD1", "5-001a");
 
-static struct regulator_consumer_supply wm8994_dcvdd_supply = {
-	.dev_name	= "5-001a",
-	.supply		= "DCVDD",
-};
+static struct regulator_consumer_supply wm8994_dcvdd_supply =
+	REGULATOR_SUPPLY("DCVDD", "5-001a");
 
 static struct regulator_init_data wm8994_ldo1_data = {
 	.constraints	= {
@@ -664,6 +647,7 @@ static void __init aquila_map_io(void)
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
 static void __init aquila_machine_init(void)
@@ -698,5 +682,5 @@ MACHINE_START(AQUILA, "Aquila")
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
-	.timer		= &s3c24xx_timer,
+	.timer		= &s5p_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 056f5c769b0..243291722c6 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -45,6 +45,7 @@
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/clock.h>
+#include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -108,6 +109,8 @@ static struct s3c_fb_pd_win goni_fb_win0 = {
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
+	.virtual_x	= 480,
+	.virtual_y	= 2 * 800,
 };
 
 static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
@@ -269,10 +272,30 @@ static void __init goni_tsp_init(void)
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
+static struct regulator_consumer_supply goni_ldo3_consumers[] = {
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
+};
+
 static struct regulator_consumer_supply goni_ldo5_consumers[] = {
 	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
 };
 
+static struct regulator_consumer_supply goni_ldo8_consumers[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+};
+
+static struct regulator_consumer_supply goni_ldo11_consumers[] = {
+	REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */
+};
+
+static struct regulator_consumer_supply goni_ldo13_consumers[] = {
+	REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */
+};
+
+static struct regulator_consumer_supply goni_ldo14_consumers[] = {
+	REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */
+};
+
 static struct regulator_init_data goni_ldo2_data = {
 	.constraints	= {
 		.name		= "VALIVE_1.1V",
@@ -292,8 +315,10 @@ static struct regulator_init_data goni_ldo3_data = {
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
-		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers),
+	.consumer_supplies = goni_ldo3_consumers,
 };
 
 static struct regulator_init_data goni_ldo4_data = {
@@ -311,6 +336,7 @@ static struct regulator_init_data goni_ldo5_data = {
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
 	.consumer_supplies = goni_ldo5_consumers,
@@ -341,8 +367,10 @@ static struct regulator_init_data goni_ldo8_data = {
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
-		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers),
+	.consumer_supplies = goni_ldo8_consumers,
 };
 
 static struct regulator_init_data goni_ldo9_data = {
@@ -351,7 +379,6 @@ static struct regulator_init_data goni_ldo9_data = {
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
-		.always_on	= 1,
 	},
 };
 
@@ -371,8 +398,10 @@ static struct regulator_init_data goni_ldo11_data = {
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
-		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo11_consumers),
+	.consumer_supplies	= goni_ldo11_consumers,
 };
 
 static struct regulator_init_data goni_ldo12_data = {
@@ -381,7 +410,6 @@ static struct regulator_init_data goni_ldo12_data = {
 		.min_uV		= 1200000,
 		.max_uV		= 1200000,
 		.apply_uV	= 1,
-		.always_on	= 1,
 	},
 };
 
@@ -391,8 +419,10 @@ static struct regulator_init_data goni_ldo13_data = {
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
-		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo13_consumers),
+	.consumer_supplies	= goni_ldo13_consumers,
 };
 
 static struct regulator_init_data goni_ldo14_data = {
@@ -401,8 +431,10 @@ static struct regulator_init_data goni_ldo14_data = {
 		.min_uV		= 1800000,
 		.max_uV		= 1800000,
 		.apply_uV	= 1,
-		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo14_consumers),
+	.consumer_supplies	= goni_ldo14_consumers,
 };
 
 static struct regulator_init_data goni_ldo15_data = {
@@ -411,7 +443,6 @@ static struct regulator_init_data goni_ldo15_data = {
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
-		.always_on	= 1,
 	},
 };
 
@@ -421,7 +452,6 @@ static struct regulator_init_data goni_ldo16_data = {
 		.min_uV		= 1800000,
 		.max_uV		= 1800000,
 		.apply_uV	= 1,
-		.always_on	= 1,
 	},
 };
 
@@ -436,13 +466,11 @@ static struct regulator_init_data goni_ldo17_data = {
 };
 
 /* BUCK */
-static struct regulator_consumer_supply buck1_consumer[] = {
-	{	.supply	= "vddarm", },
-};
+static struct regulator_consumer_supply buck1_consumer =
+	REGULATOR_SUPPLY("vddarm", NULL);
 
-static struct regulator_consumer_supply buck2_consumer[] = {
-	{	.supply	= "vddint", },
-};
+static struct regulator_consumer_supply buck2_consumer =
+	REGULATOR_SUPPLY("vddint", NULL);
 
 static struct regulator_init_data goni_buck1_data = {
 	.constraints	= {
@@ -453,8 +481,8 @@ static struct regulator_init_data goni_buck1_data = {
 		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
 				  REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
-	.consumer_supplies	= buck1_consumer,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck1_consumer,
 };
 
 static struct regulator_init_data goni_buck2_data = {
@@ -466,8 +494,8 @@ static struct regulator_init_data goni_buck2_data = {
 		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
 				  REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
-	.consumer_supplies	= buck2_consumer,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck2_consumer,
 };
 
 static struct regulator_init_data goni_buck3_data = {
@@ -531,26 +559,14 @@ static struct max8998_platform_data goni_max8998_pdata = {
 #endif
 
 static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
-	{
-		.dev_name	= "5-001a",
-		.supply		= "DBVDD",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "AVDD2",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "CPVDD",
-	},
+	REGULATOR_SUPPLY("DBVDD", "5-001a"),
+	REGULATOR_SUPPLY("AVDD2", "5-001a"),
+	REGULATOR_SUPPLY("CPVDD", "5-001a"),
 };
 
 static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
-	{
-		.dev_name	= "5-001a",
-		.supply		= "SPKVDD1",
-	}, {
-		.dev_name	= "5-001a",
-		.supply		= "SPKVDD2",
-	},
+	REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
+	REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
 };
 
 static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
@@ -599,15 +615,11 @@ static struct platform_device wm8994_fixed_voltage1 = {
 	},
 };
 
-static struct regulator_consumer_supply wm8994_avdd1_supply = {
-	.dev_name	= "5-001a",
-	.supply		= "AVDD1",
-};
+static struct regulator_consumer_supply wm8994_avdd1_supply =
+	REGULATOR_SUPPLY("AVDD1", "5-001a");
 
-static struct regulator_consumer_supply wm8994_dcvdd_supply = {
-	.dev_name	= "5-001a",
-	.supply		= "DCVDD",
-};
+static struct regulator_consumer_supply wm8994_dcvdd_supply =
+	REGULATOR_SUPPLY("DCVDD", "5-001a");
 
 static struct regulator_init_data wm8994_ldo1_data = {
 	.constraints	= {
@@ -794,6 +806,7 @@ static struct platform_device *goni_devices[] __initdata = {
 	&goni_i2c_gpio5,
 	&mmc2_fixed_voltage,
 	&goni_device_gpiokeys,
+	&s3c_device_i2c0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -823,6 +836,7 @@ static void __init goni_map_io(void)
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
 static void __init goni_machine_init(void)
@@ -830,6 +844,9 @@ static void __init goni_machine_init(void)
 	/* Radio: call before I2C 1 registeration */
 	goni_radio_init();
 
+	/* I2C0 */
+	s3c_i2c0_set_platdata(NULL);
+
 	/* I2C1 */
 	s3c_i2c1_set_platdata(NULL);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
@@ -873,5 +890,5 @@ MACHINE_START(GONI, "GONI")
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
-	.timer		= &s3c24xx_timer,
+	.timer		= &s5p_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index ce11a02eabf..6c412c8cecc 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -30,6 +30,7 @@
 #include <plat/ata.h>
 #include <plat/iic.h>
 #include <plat/pm.h>
+#include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -111,6 +112,7 @@ static void __init smdkc110_map_io(void)
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
 static void __init smdkc110_machine_init(void)
@@ -138,5 +140,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
-	.timer		= &s3c24xx_timer,
+	.timer		= &s5p_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bc9fdb52a02..bc08ac42e7c 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -18,6 +18,7 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -43,6 +44,8 @@
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -208,6 +211,45 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+static int smdkv210_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S5PV210_GPD0(3), "Backlight");
+	if (ret) {
+		printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n");
+		return ret;
+	}
+
+	/* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */
+	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2));
+
+	return 0;
+}
+
+static void smdkv210_backlight_exit(struct device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT);
+	gpio_free(S5PV210_GPD0(3));
+}
+
+static struct platform_pwm_backlight_data smdkv210_backlight_data = {
+	.pwm_id		= 3,
+	.max_brightness	= 255,
+	.dft_brightness	= 255,
+	.pwm_period_ns	= 78770,
+	.init		= smdkv210_backlight_init,
+	.exit		= smdkv210_backlight_exit,
+};
+
+static struct platform_device smdkv210_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent		= &s3c_device_timer[3].dev,
+		.platform_data	= &smdkv210_backlight_data,
+	},
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
@@ -229,6 +271,8 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&samsung_device_keypad,
 	&smdkv210_dm9000,
 	&smdkv210_lcd_lte480wv,
+	&s3c_device_timer[3],
+	&smdkv210_backlight_device,
 };
 
 static void __init smdkv210_dm9000_init(void)
@@ -272,6 +316,7 @@ static void __init smdkv210_map_io(void)
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void __init smdkv210_machine_init(void)
@@ -306,5 +351,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
-	.timer		= &s3c24xx_timer,
+	.timer		= &s5p_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 043c938806b..925fc0dc625 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -27,6 +27,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/s5p-time.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define TORBRECK_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -104,6 +105,7 @@ static void __init torbreck_map_io(void)
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
 static void __init torbreck_machine_init(void)
@@ -127,5 +129,5 @@ MACHINE_START(TORBRECK, "TORBRECK")
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
-	.timer		= &s3c24xx_timer,
+	.timer		= &s5p_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c
new file mode 100644
index 00000000000..54cc5b11be0
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-fimc.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5PV210 camera interface GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/camport.h>
+
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id)
+{
+	u32 gpio8, gpio5;
+	int ret;
+
+	switch (id) {
+	case S5P_CAMPORT_A:
+		gpio8 = S5PV210_GPE0(0);
+		gpio5 = S5PV210_GPE1(0);
+		break;
+
+	case S5P_CAMPORT_B:
+		gpio8 = S5PV210_GPJ0(0);
+		gpio5 = S5PV210_GPJ1(0);
+		break;
+
+	default:
+		WARN(1, "Wrong camport id: %d\n", id);
+		return -EINVAL;
+	}
+
+	ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2),
+				    S3C_GPIO_PULL_UP);
+	if (ret)
+		return ret;
+
+	return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2),
+				     S3C_GPIO_PULL_UP);
+}