Merge tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt into next/drivers

From Tony Prisk <linux@prisktech.co.nz>:

arm: vt8500: Add pinctrl driver for arch-vt8500

This series adds support for the pinctrl/gpio module on all arch-vt8500
supported SoCs.

As part of the review process, some tidy up is also done to
drivers/of/base.c to remove some code that is being constantly duplicated.

Also, a patch for the bcm2835 pinctrl driver is included to take advantage
of the new of/base.c code.

* tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt: (606 commits)
  pinctrl: bcm2835: make use of of_property_read_u32_index()
  gpio: vt8500: Remove arch-vt8500 gpio driver
  arm: vt8500: Remove gpio devicetree nodes
  arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
  pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
  arm: vt8500: Increase available GPIOs on arch-vt8500
  of: Remove duplicated code for validating property and value
  of: Add support for reading a u32 from a multi-value property.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 19 insertions, 19 deletions

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index fcdf52dbcc4..f051f53e35b 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
 		.name		= "rot",
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
@@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = {
 	.ctrlbit	= (1<<19),
 };
 
+static struct clk clk_pdma0 = {
+	.name		= "pdma0",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+	.name		= "pdma1",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 4),
+};
+
 static struct clk *clkset_uart_list[] = {
 	[6] = &clk_mout_mpll.clk,
 	[7] = &clk_mout_epll.clk,
@@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = {
 	&clk_hsmmc1,
 	&clk_hsmmc2,
 	&clk_hsmmc3,
+	&clk_pdma0,
+	&clk_pdma1,
 };
 
 /* Clock initialisation code */
@@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
 	CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
 	CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
 };
 
 void __init s5pv210_register_clocks(void)
@@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
-	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 25643944836..30b24ad84f4 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = {
 		.mux_id		= 0,
 		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
 				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_BUS_TYPE_ITU_601,
+		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
 		.board_info	= &noon010pc30_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 16000000UL,