Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] s5pv210: make needlessly global symbols static
  [CPUFREQ] exynos4210: make needlessly global symbols static
  [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation
  [CPUFREQ] S5PV210: Add reboot notifier to prevent system hang
  [CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down
  [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency
  [CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable
  [CPUFREQ] S5PV210: Add arm/int voltage control support
  [CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm
  [CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed
  [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq
  [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put
  [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq
  [CPUFREQ] Remove some vi noise that escaped into the Makefile.
  [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/
  [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq
  [CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq

2 files changed, 0 insertions, 486 deletions

diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 50907aca006..599a3c0e8f6 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -15,7 +15,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 # machine support
 
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
deleted file mode 100644
index 153af8b359e..00000000000
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/cpufreq.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * CPU frequency scaling for S5PC110/S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-static struct clk *cpu_clk;
-static struct clk *dmc0_clk;
-static struct clk *dmc1_clk;
-static struct cpufreq_freqs freqs;
-
-/* APLL M,P,S values for 1G/800Mhz */
-#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
-#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
-
-/*
- * DRAM configurations to calculate refresh counter for changing
- * frequency of memory.
- */
-struct dram_conf {
-	unsigned long freq;	/* HZ */
-	unsigned long refresh;	/* DRAM refresh counter * 1000 */
-};
-
-/* DRAM configuration (DMC0 and DMC1) */
-static struct dram_conf s5pv210_dram_conf[2];
-
-enum perf_level {
-	L0, L1, L2, L3, L4,
-};
-
-enum s5pv210_mem_type {
-	LPDDR	= 0x1,
-	LPDDR2	= 0x2,
-	DDR2	= 0x4,
-};
-
-enum s5pv210_dmc_port {
-	DMC0 = 0,
-	DMC1,
-};
-
-static struct cpufreq_frequency_table s5pv210_freq_table[] = {
-	{L0, 1000*1000},
-	{L1, 800*1000},
-	{L2, 400*1000},
-	{L3, 200*1000},
-	{L4, 100*1000},
-	{0, CPUFREQ_TABLE_END},
-};
-
-static u32 clkdiv_val[5][11] = {
-	/*
-	 * Clock divider value for following
-	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
-	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
-	 *   ONEDRAM, MFC, G3D }
-	 */
-
-	/* L0 : [1000/200/100][166/83][133/66][200/200] */
-	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L1 : [800/200/100][166/83][133/66][200/200] */
-	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L2 : [400/200/100][166/83][133/66][200/200] */
-	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L3 : [200/200/100][166/83][133/66][200/200] */
-	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
-
-	/* L4 : [100/100/100][83/83][66/66][100/100] */
-	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
-};
-
-/*
- * This function set DRAM refresh counter
- * accoriding to operating frequency of DRAM
- * ch: DMC port number 0 or 1
- * freq: Operating frequency of DRAM(KHz)
- */
-static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
-{
-	unsigned long tmp, tmp1;
-	void __iomem *reg = NULL;
-
-	if (ch == DMC0) {
-		reg = (S5P_VA_DMC0 + 0x30);
-	} else if (ch == DMC1) {
-		reg = (S5P_VA_DMC1 + 0x30);
-	} else {
-		printk(KERN_ERR "Cannot find DMC port\n");
-		return;
-	}
-
-	/* Find current DRAM frequency */
-	tmp = s5pv210_dram_conf[ch].freq;
-
-	do_div(tmp, freq);
-
-	tmp1 = s5pv210_dram_conf[ch].refresh;
-
-	do_div(tmp1, tmp);
-
-	__raw_writel(tmp1, reg);
-}
-
-int s5pv210_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
-}
-
-unsigned int s5pv210_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int s5pv210_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	unsigned long reg;
-	unsigned int index, priv_index;
-	unsigned int pll_changing = 0;
-	unsigned int bus_speed_changing = 0;
-
-	freqs.old = s5pv210_getspeed(0);
-
-	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   target_freq, relation, &index))
-		return -EINVAL;
-
-	freqs.new = s5pv210_freq_table[index].frequency;
-	freqs.cpu = 0;
-
-	if (freqs.new == freqs.old)
-		return 0;
-
-	/* Finding current running level index */
-	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   freqs.old, relation, &priv_index))
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (freqs.new > freqs.old) {
-		/* Voltage up: will be implemented */
-	}
-
-	/* Check if there need to change PLL */
-	if ((index == L0) || (priv_index == L0))
-		pll_changing = 1;
-
-	/* Check if there need to change System bus clock */
-	if ((index == L4) || (priv_index == L4))
-		bus_speed_changing = 1;
-
-	if (bus_speed_changing) {
-		/*
-		 * Reconfigure DRAM refresh counter value for minimum
-		 * temporary clock while changing divider.
-		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
-		 */
-		if (pll_changing)
-			s5pv210_set_refresh(DMC1, 83000);
-		else
-			s5pv210_set_refresh(DMC1, 100000);
-
-		s5pv210_set_refresh(DMC0, 83000);
-	}
-
-	/*
-	 * APLL should be changed in this level
-	 * APLL -> MPLL(for stable transition) -> APLL
-	 * Some clock source's clock API are not prepared.
-	 * Do not use clock API in below code.
-	 */
-	if (pll_changing) {
-		/*
-		 * 1. Temporary Change divider for MFC and G3D
-		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
-		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
-		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
-			(3 << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
-
-		/* For MFC, G3D dividing */
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
-		} while (reg & ((1 << 16) | (1 << 17)));
-
-		/*
-		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
-		 * (200/4=50)->(667/4=166)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
-		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
-		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
-			(1 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
-		} while (reg & ((1 << 7) | (1 << 3)));
-
-		/*
-		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
-		 * true refresh counter is already programed in upper
-		 * code. 0x287@83Mhz
-		 */
-		if (!bus_speed_changing)
-			s5pv210_set_refresh(DMC1, 133000);
-
-		/* 4. SCLKAPLL -> SCLKMPLL */
-		reg = __raw_readl(S5P_CLK_SRC0);
-		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
-		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
-		} while (reg & (0x1 << 18));
-
-	}
-
-	/* Change divider */
-	reg = __raw_readl(S5P_CLK_DIV0);
-
-	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
-		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
-		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
-		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
-
-	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
-		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
-		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
-		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
-		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
-		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
-		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
-		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
-
-	__raw_writel(reg, S5P_CLK_DIV0);
-
-	do {
-		reg = __raw_readl(S5P_CLKDIV_STAT0);
-	} while (reg & 0xff);
-
-	/* ARM MCS value changed */
-	reg = __raw_readl(S5P_ARM_MCS_CON);
-	reg &= ~0x3;
-	if (index >= L3)
-		reg |= 0x3;
-	else
-		reg |= 0x1;
-
-	__raw_writel(reg, S5P_ARM_MCS_CON);
-
-	if (pll_changing) {
-		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
-		__raw_writel(0x2cf, S5P_APLL_LOCK);
-
-		/*
-		 * 6. Turn on APLL
-		 * 6-1. Set PMS values
-		 * 6-2. Wait untile the PLL is locked
-		 */
-		if (index == L0)
-			__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
-		else
-			__raw_writel(APLL_VAL_800, S5P_APLL_CON);
-
-		do {
-			reg = __raw_readl(S5P_APLL_CON);
-		} while (!(reg & (0x1 << 29)));
-
-		/*
-		 * 7. Change souce clock from SCLKMPLL(667Mhz)
-		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
-		 * (667/4=166)->(200/4=50)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
-		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
-		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
-			(0 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
-		} while (reg & ((1 << 7) | (1 << 3)));
-
-		/*
-		 * 8. Change divider for MFC and G3D
-		 * (200/4=50)->(200/1=200)Mhz
-		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
-		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
-		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
-			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
-
-		/* For MFC, G3D dividing */
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
-		} while (reg & ((1 << 16) | (1 << 17)));
-
-		/* 9. Change MPLL to APLL in MSYS_MUX */
-		reg = __raw_readl(S5P_CLK_SRC0);
-		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
-		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
-
-		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
-		} while (reg & (0x1 << 18));
-
-		/*
-		 * 10. DMC1 refresh counter
-		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
-		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
-		 */
-		if (!bus_speed_changing)
-			s5pv210_set_refresh(DMC1, 200000);
-	}
-
-	/*
-	 * L4 level need to change memory bus speed, hence onedram clock divier
-	 * and memory refresh parameter should be changed
-	 */
-	if (bus_speed_changing) {
-		reg = __raw_readl(S5P_CLK_DIV6);
-		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
-		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV6);
-
-		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT1);
-		} while (reg & (1 << 15));
-
-		/* Reconfigure DRAM refresh counter value */
-		if (index != L4) {
-			/*
-			 * DMC0 : 166Mhz
-			 * DMC1 : 200Mhz
-			 */
-			s5pv210_set_refresh(DMC0, 166000);
-			s5pv210_set_refresh(DMC1, 200000);
-		} else {
-			/*
-			 * DMC0 : 83Mhz
-			 * DMC1 : 100Mhz
-			 */
-			s5pv210_set_refresh(DMC0, 83000);
-			s5pv210_set_refresh(DMC1, 100000);
-		}
-	}
-
-	if (freqs.new < freqs.old) {
-		/* Voltage down: will be implemented */
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-#endif
-
-static int check_mem_type(void __iomem *dmc_reg)
-{
-	unsigned long val;
-
-	val = __raw_readl(dmc_reg + 0x4);
-	val = (val & (0xf << 8));
-
-	return val >> 8;
-}
-
-static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned long mem_type;
-
-	cpu_clk = clk_get(NULL, "armclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	dmc0_clk = clk_get(NULL, "sclk_dmc0");
-	if (IS_ERR(dmc0_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc0_clk);
-	}
-
-	dmc1_clk = clk_get(NULL, "hclk_msys");
-	if (IS_ERR(dmc1_clk)) {
-		clk_put(dmc0_clk);
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc1_clk);
-	}
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/*
-	 * check_mem_type : This driver only support LPDDR & LPDDR2.
-	 * other memory type is not supported.
-	 */
-	mem_type = check_mem_type(S5P_VA_DMC0);
-
-	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
-		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
-		return -EINVAL;
-	}
-
-	/* Find current refresh counter and frequency each DMC */
-	s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
-	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
-
-	s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
-	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
-
-	policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
-
-	cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
-
-	policy->cpuinfo.transition_latency = 40000;
-
-	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
-}
-
-static struct cpufreq_driver s5pv210_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= s5pv210_verify_speed,
-	.target		= s5pv210_target,
-	.get		= s5pv210_getspeed,
-	.init		= s5pv210_cpu_init,
-	.name		= "s5pv210",
-#ifdef CONFIG_PM
-	.suspend	= s5pv210_cpufreq_suspend,
-	.resume		= s5pv210_cpufreq_resume,
-#endif
-};
-
-static int __init s5pv210_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s5pv210_driver);
-}
-
-late_initcall(s5pv210_cpufreq_init);