diff options
| author | John W. Linville <linville@tuxdriver.com> | 2012-04-12 13:49:28 -0400 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2012-04-12 13:49:28 -0400 |
| commit | 8065248069097dddf9945acfb2081025e9618c16 (patch) | |
| tree | eddf3fb0372ba0f65c01382d386942ea8d18932d /arch/arm/mach-sa1100 | |
| parent | e66a8ddff72e85605f2212a0ebc666c7e9116641 (diff) | |
| parent | b4838d12e1f3cb48c2489a0b08733b5dbf848297 (diff) | |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Diffstat (limited to 'arch/arm/mach-sa1100')
38 files changed, 845 insertions, 1342 deletions
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index ed7408d3216..60b97ec0167 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 0c4b76ab4d8..375d3f779a8 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -15,14 +15,16 @@ #include <linux/errno.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> #include <linux/mm.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> @@ -36,17 +38,18 @@ #include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" #define ASSABET_BCR_DB1110 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_IRDA_MD0) #define ASSABET_BCR_DB1111 \ - (ASSABET_BCR_SPK_OFF | ASSABET_BCR_QMUTE | \ + (ASSABET_BCR_SPK_OFF | \ ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED | \ ASSABET_BCR_RS232EN | ASSABET_BCR_LCD_12RGB | \ ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \ @@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) EXPORT_SYMBOL(ASSABET_BCR_frob); -static void assabet_backlight_power(int on) -{ -#ifndef ASSABET_PAL_VIDEO - if (on) - ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); - else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); -} - -/* - * Turn on/off the backlight. When turning the backlight on, - * we wait 500us after turning it on so we don't cause the - * supplies to droop when we enable the LCD controller (and - * cause a hard reset.) - */ -static void assabet_lcd_power(int on) +static void assabet_ucb1x00_reset(enum ucb1x00_reset state) { -#ifndef ASSABET_PAL_VIDEO - if (on) { - ASSABET_BCR_set(ASSABET_BCR_LCD_ON); - udelay(500); - } else -#endif - ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); + if (state == UCB_RST_PROBE) + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); } @@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = { }; static struct resource assabet_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; @@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = { .set_speed = assabet_irda_set_speed, }; +static struct ucb1x00_plat_data assabet_ucb1x00_data = { + .reset = assabet_ucb1x00_reset, + .gpio_base = -1, +}; + static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, + .codec_pdata = &assabet_ucb1x00_data, +}; + +static void assabet_lcd_set_visual(u32 visual) +{ + u_int is_true_color = visual == FB_VISUAL_TRUECOLOR; + + if (machine_is_assabet()) { +#if 1 // phase 4 or newer Assabet's + if (is_true_color) + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); +#else + // older Assabet's + if (is_true_color) + ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); + else + ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); +#endif + } +} + +#ifndef ASSABET_PAL_VIDEO +static void assabet_lcd_backlight_power(int on) +{ + if (on) + ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON); + else + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +/* + * Turn on/off the backlight. When turning the backlight on, we wait + * 500us after turning it on so we don't cause the supplies to droop + * when we enable the LCD controller (and cause a hard reset.) + */ +static void assabet_lcd_power(int on) +{ + if (on) { + ASSABET_BCR_set(ASSABET_BCR_LCD_ON); + udelay(500); + } else + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +/* + * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually + * takes an RGB666 signal, but we provide it with an RGB565 signal + * instead (def_rgb_16). + */ +static struct sa1100fb_mach_info lq039q2ds54_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 61, .upper_margin = 3, + .right_margin = 9, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .backlight_power = assabet_lcd_backlight_power, + .lcd_power = assabet_lcd_power, + .set_visual = assabet_lcd_set_visual, +}; +#else +static void assabet_pal_backlight_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON); +} + +static void assabet_pal_power(int on) +{ + ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); +} + +static struct sa1100fb_mach_info pal_info = { + .pixclock = 67797, .bpp = 16, + .xres = 640, .yres = 512, + + .hsync_len = 64, .vsync_len = 6, + .left_margin = 125, .upper_margin = 70, + .right_margin = 115, .lower_margin = 36, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), + + .backlight_power = assabet_pal_backlight_power, + .lcd_power = assabet_pal_power, + .set_visual = assabet_lcd_set_visual, }; +#endif + +#ifdef CONFIG_ASSABET_NEPONSET +static struct resource neponset_resources[] = { + DEFINE_RES_MEM(0x10000000, 0x08000000), + DEFINE_RES_MEM(0x18000000, 0x04000000), + DEFINE_RES_MEM(0x40000000, SZ_8K), + DEFINE_RES_IRQ(IRQ_GPIO25), +}; +#endif static void __init assabet_init(void) { /* * Ensure that the power supply is in "high power" mode. */ - GPDR |= GPIO_GPIO16; GPSR = GPIO_GPIO16; + GPDR |= GPIO_GPIO16; /* * Ensure that these pins are set as outputs and are driving @@ -218,8 +301,16 @@ static void __init assabet_init(void) * the WS latch in the CPLD, and we don't float causing * excessive power drain. --rmk */ - GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM; + + /* + * Also set GPIO27 as an output; this is used to clock UART3 + * via the FPGA and as otherwise has no pullups or pulldowns, + * so stop it floating. + */ + GPCR = GPIO_GPIO27; + GPDR |= GPIO_GPIO27; /* * Set up registers for sleep mode. @@ -231,8 +322,7 @@ static void __init assabet_init(void) PPDR |= PPC_TXD3 | PPC_TXD1; PPSR |= PPC_TXD3 | PPC_TXD1; - sa1100fb_lcd_power = assabet_lcd_power; - sa1100fb_backlight_power = assabet_backlight_power; + sa11x0_ppc_configure_mcp(); if (machine_has_neponset()) { /* @@ -246,9 +336,17 @@ static void __init assabet_init(void) #ifndef CONFIG_ASSABET_NEPONSET printk( "Warning: Neponset detected but full support " "hasn't been configured in the kernel\n" ); +#else + platform_device_register_simple("neponset", 0, + neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } +#ifndef ASSABET_PAL_VIDEO + sa11x0_register_lcd(&lq039q2ds54_info); +#else + sa11x0_register_lcd(&pal_video); +#endif sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); @@ -412,21 +510,8 @@ static void __init assabet_map_io(void) */ Ser1SDCR0 |= SDCR0_SUS; - if (machine_has_neponset()) { -#ifdef CONFIG_ASSABET_NEPONSET - extern void neponset_map_io(void); - - /* - * We map Neponset registers even if it isn't present since - * many drivers will try to probe their stuff (and fail). - * This is still more friendly than a kernel paging request - * crash. - */ - neponset_map_io(); -#endif - } else { + if (!machine_has_neponset()) sa1100_register_uart_fns(&assabet_port_fns); - } /* * When Neponset is attached, the first UART should be @@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet") .atag_offset = 0x100, .fixup = fixup_assabet, .map_io = assabet_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b07a2c024cb..e0f0c030258 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -39,20 +39,27 @@ #include "generic.h" static struct resource sa1111_resources[] = { - [0] = { - .start = BADGE4_SA1111_BASE, - .end = BADGE4_SA1111_BASE + 0x00001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = BADGE4_IRQ_GPIO_SA1111, - .end = BADGE4_IRQ_GPIO_SA1111, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000), + [1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111), }; +static int badge4_sa1111_enable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 1); + return 0; +} + +static void badge4_sa1111_disable(void *data, unsigned devid) +{ + if (devid == SA1111_DEVID_USB) + badge4_set_5V(BADGE4_5V_USB, 0); +} + static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, + .enable = badge4_sa1111_enable, + .disable = badge4_sa1111_disable, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = { .nr_parts = ARRAY_SIZE(badge4_partitions), }; -static struct resource badge4_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource badge4_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M); static int five_v_on __initdata = 0; @@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x10000000), .length = 0x00100000, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, - .type = MT_DEVICE } }; @@ -304,6 +303,7 @@ static void __init badge4_map_io(void) MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") .atag_offset = 0x100, .map_io = badge4_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, #ifdef CONFIG_SA1111 diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 11bb6d0b9be..4a61f60e050 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -18,7 +18,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -30,14 +29,11 @@ #include <mach/cerf.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource cerfuart2_resources[] = { - [0] = { - .start = 0x80030000, - .end = 0x8003ffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x80030000, SZ_64K), }; static struct platform_device cerfuart2_device = { @@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = { .nr_parts = ARRAY_SIZE(cerf_partitions), }; -static struct resource cerf_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource cerf_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init cerf_init_irq(void) { @@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = { static void __init cerf_init(void) { + sa11x0_ppc_configure_mcp(); platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); sa11x0_register_mcp(&cerf_mcp_data); @@ -136,6 +130,7 @@ static void __init cerf_init(void) MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") /* Maintainer: support@intrinsyc.com */ .map_io = cerf_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index fd5652118ed..c7f418b0cde 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -22,15 +22,17 @@ #include <linux/tty.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/setup.h> #include <mach/collie.h> @@ -44,15 +46,12 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/locomo.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" static struct resource collie_scoop_resources[] = { - [0] = { - .start = 0x40800000, - .end = 0x40800fff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(0x40800000, SZ_4K), }; static struct scoop_config collie_scoop_setup = { @@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .gpio_base = COLLIE_TC35143_GPIO_BASE, + .codec_pdata = &collie_ucb1x00_data, }; /* @@ -221,16 +224,8 @@ device_initcall(collie_uart_init); static struct resource locomo_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO25, - .end = IRQ_GPIO25, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), + [1] = DEFINE_RES_IRQ(IRQ_GPIO25), }; static struct locomo_platform_data locomo_info = { @@ -303,11 +298,25 @@ static struct flash_platform_data collie_flash_data = { }; static struct resource collie_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), +}; + +static struct sa1100fb_mach_info collie_lcd_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 11, .upper_margin = 2, + .right_margin = 30, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + +#ifdef CONFIG_BACKLIGHT_LOCOMO + .lcd_power = locomolcd_power +#endif }; static void __init collie_init(void) @@ -341,6 +350,10 @@ static void __init collie_init(void) collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); + + sa11x0_ppc_configure_mcp(); + + platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -348,6 +361,7 @@ static void __init collie_init(void) printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); } + sa11x0_register_lcd(&collie_lcd_info); sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); @@ -383,6 +397,7 @@ static void __init collie_map_io(void) MACHINE_START(COLLIE, "Sharp-Collie") .map_io = collie_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c deleted file mode 100644 index ad660350c29..00000000000 --- a/arch/arm/mach-sa1100/dma.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * arch/arm/mach-sa1100/dma.c - * - * Support functions for the SA11x0 internal DMA channels. - * - * Copyright (C) 2000, 2001 by Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/errno.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> - - -#undef DEBUG -#ifdef DEBUG -#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg ) -#else -#define DPRINTK( x... ) -#endif - - -typedef struct { - const char *device_id; /* device name */ - u_long device; /* this channel device, 0 if unused*/ - dma_callback_t callback; /* to call when DMA completes */ - void *data; /* ... with private data ptr */ -} sa1100_dma_t; - -static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; - -static DEFINE_SPINLOCK(dma_list_lock); - - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - dma_regs_t *dma_regs = dev_id; - sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7); - int status = dma_regs->RdDCSR; - - if (status & (DCSR_ERROR)) { - printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id); - dma_regs->ClrDCSR = DCSR_ERROR; - } - - dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB); - if (dma->callback) { - if (status & DCSR_DONEA) - dma->callback(dma->data); - if (status & DCSR_DONEB) - dma->callback(dma->data); - } - return IRQ_HANDLED; -} - - -/** - * sa1100_request_dma - allocate one of the SA11x0's DMA channels - * @device: The SA11x0 peripheral targeted by this request - * @device_id: An ascii name for the claiming device - * @callback: Function to be called when the DMA completes - * @data: A cookie passed back to the callback function - * @dma_regs: Pointer to the location of the allocated channel's identifier - * - * This function will search for a free DMA channel and returns the - * address of the hardware registers for that channel as the channel - * identifier. This identifier is written to the location pointed by - * @dma_regs. The list of possible values for @device are listed into - * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum. - * - * Note that reading from a port and writing to the same port are - * actually considered as two different streams requiring separate - * DMA registrations. - * - * The @callback function is called from interrupt context when one - * of the two possible DMA buffers in flight has terminated. That - * function has to be small and efficient while posponing more complex - * processing to a lower priority execution context. - * - * If no channels are available, or if the desired @device is already in - * use by another DMA channel, then an error code is returned. This - * function must be called before any other DMA calls. - **/ - -int sa1100_request_dma (dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **dma_regs) -{ - sa1100_dma_t *dma = NULL; - dma_regs_t *regs; - int i, err; - - *dma_regs = NULL; - - err = 0; - spin_lock(&dma_list_lock); - for (i = 0; i < SA1100_DMA_CHANNELS; i++) { - if (dma_chan[i].device == device) { - err = -EBUSY; - break; - } else if (!dma_chan[i].device && !dma) { - dma = &dma_chan[i]; - } - } - if (!err) { - if (dma) - dma->device = device; - else - err = -ENOSR; - } - spin_unlock(&dma_list_lock); - if (err) - return err; - - i = dma - dma_chan; - regs = (dma_regs_t *)&DDAR(i); - err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED, - device_id, regs); - if (err) { - printk(KERN_ERR - "%s: unable to request IRQ %d for %s\n", - __func__, IRQ_DMA0 + i, device_id); - dma->device = 0; - return err; - } - - *dma_regs = regs; - dma->device_id = device_id; - dma->callback = callback; - dma->data = data; - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = device; - - return 0; -} - - -/** - * sa1100_free_dma - free a SA11x0 DMA channel - * @regs: identifier for the channel to free - * - * This clears all activities on a given DMA channel and releases it - * for future requests. The @regs identifier is provided by a - * successful call to sa1100_request_dma(). - **/ - -void sa1100_free_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - if (!dma_chan[i].device) { - printk(KERN_ERR "%s: Trying to free free DMA\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - free_irq(IRQ_DMA0 + i, regs); - dma_chan[i].device = 0; -} - - -/** - * sa1100_start_dma - submit a data buffer for DMA - * @regs: identifier for the channel to use - * @dma_ptr: buffer physical (or bus) start address - * @size: buffer size - * - * This function hands the given data buffer to the hardware for DMA - * access. If another buffer is already in flight then this buffer - * will be queued so the DMA engine will switch to it automatically - * when the previous one is done. The DMA engine is actually toggling - * between two buffers so at most 2 successful calls can be made before - * one of them terminates and the callback function is called. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - * - * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer - * is larger than that then it's the caller's responsibility to split - * it into smaller chunks and submit them separately. If this is the - * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending - * up with too small chunks. The callback function can be used to chain - * submissions of buffer chunks. - * - * Error return values: - * %-EOVERFLOW: Given buffer size is too big. - * %-EBUSY: Both DMA buffers are already in use. - * %-EAGAIN: Both buffers were busy but one of them just completed - * but the interrupt handler has to execute first. - * - * This function returs 0 on success. - **/ - -int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size) -{ - unsigned long flags; - u_long status; - int ret; - - if (dma_ptr & 3) - printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n", - (unsigned long)dma_ptr); - - if (size > MAX_DMA_SIZE) - return -EOVERFLOW; - - local_irq_save(flags); - status = regs->RdDCSR; - - /* If both DMA buffers are started, there's nothing else we can do. */ - if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) { - DPRINTK("start: st %#x busy\n", status); - ret = -EBUSY; - goto out; - } - - if (((status & DCSR_BIU) && (status & DCSR_STRTB)) || - (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) { - if (status & DCSR_DONEA) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSA = dma_ptr; - regs->DBTA = size; - regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size); - } else { - if (status & DCSR_DONEB) { - /* give a chance for the interrupt to be processed */ - ret = -EAGAIN; - goto out; - } - regs->DBSB = dma_ptr; - regs->DBTB = size; - regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN; - DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size); - } - ret = 0; - -out: - local_irq_restore(flags); - return ret; -} - - -/** - * sa1100_get_dma_pos - return current DMA position - * @regs: identifier for the channel to use - * - * This function returns the current physical (or bus) address for the - * given DMA channel. If the channel is running i.e. not in a stopped - * state then the caller must disable interrupts prior calling this - * function and process the returned value before re-enabling them to - * prevent races with the completion interrupt handler and the callback - * function. The validation of the returned value is the caller's - * responsibility as well -- the hardware seems to return out of range - * values when the DMA engine completes a buffer. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs) -{ - int status; - - /* - * We must determine whether buffer A or B is active. - * Two possibilities: either we are in the middle of - * a buffer, or the DMA controller just switched to the - * next toggle but the interrupt hasn't been serviced yet. - * The former case is straight forward. In the later case, - * we'll do like if DMA is just at the end of the previous - * toggle since all registers haven't been reset yet. - * This goes around the edge case and since we're always - * a little behind anyways it shouldn't make a big difference. - * If DMA has been stopped prior calling this then the - * position is exact. - */ - status = regs->RdDCSR; - if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) || - ( (status & DCSR_BIU) && !(status & DCSR_STRTB))) - return regs->DBSA; - else - return regs->DBSB; -} - - -/** - * sa1100_reset_dma - reset a DMA channel - * @regs: identifier for the channel to use - * - * This function resets and reconfigure the given DMA channel. This is - * particularly useful after a sleep/wakeup event. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -void sa1100_reset_dma(dma_regs_t *regs) -{ - int i; - - for (i = 0; i < SA1100_DMA_CHANNELS; i++) - if (regs == (dma_regs_t *)&DDAR(i)) - break; - if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __func__); - return; - } - - regs->ClrDCSR = - (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB | - DCSR_IE | DCSR_ERROR | DCSR_RUN); - regs->DDAR = dma_chan[i].device; -} - - -EXPORT_SYMBOL(sa1100_request_dma); -EXPORT_SYMBOL(sa1100_free_dma); -EXPORT_SYMBOL(sa1100_start_dma); -EXPORT_SYMBOL(sa1100_get_dma_pos); -EXPORT_SYMBOL(sa1100_reset_dma); - diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c1ebf4a792..7c524b4e415 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -14,17 +14,22 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/platform_device.h> +#include <video/sa1100fb.h> + #include <asm/div64.h> -#include <mach/hardware.h> -#include <asm/system.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <asm/irq.h> +#include <asm/system_misc.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> #include "generic.h" @@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data) static struct resource sa11x0udc_resources[] = { - [0] = { - .start = __PREG(Ser0UDCCR), - .end = __PREG(Ser0UDCCR) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser0UDC, - .end = IRQ_Ser0UDC, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC), }; static u64 sa11x0udc_dma_mask = 0xffffffffUL; @@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = { }; static struct resource sa11x0uart1_resources[] = { - [0] = { - .start = __PREG(Ser1UTCR0), - .end = __PREG(Ser1UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser1UART, - .end = IRQ_Ser1UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser1UART), }; static struct platform_device sa11x0uart1_device = { @@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = { }; static struct resource sa11x0uart3_resources[] = { - [0] = { - .start = __PREG(Ser3UTCR0), - .end = __PREG(Ser3UTCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser3UART, - .end = IRQ_Ser3UART, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser3UART), }; static struct platform_device sa11x0uart3_device = { @@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = { }; static struct resource sa11x0mcp_resources[] = { - [0] = { - .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0xffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4MCP, - .end = IRQ_Ser4MCP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K), + [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4), + [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP), }; static u64 sa11x0mcp_dma_mask = 0xffffffffUL; @@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = { .resource = sa11x0mcp_resources, }; +void __init sa11x0_ppc_configure_mcp(void) +{ + /* Setup the PPC unit for the MCP */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); +} + void sa11x0_register_mcp(struct mcp_plat_data *data) { sa11x0_register_device(&sa11x0mcp_device, data); } static struct resource sa11x0ssp_resources[] = { - [0] = { - .start = 0x80070000, - .end = 0x8007ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_Ser4SSP, - .end = IRQ_Ser4SSP, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x80070000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP), }; static u64 sa11x0ssp_dma_mask = 0xffffffffUL; @@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = { }; static struct resource sa11x0fb_resources[] = { - [0] = { - .start = 0xb0100000, - .end = 0xb010ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_LCD), }; static struct platform_device sa11x0fb_device = { @@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = { .resource = sa11x0fb_resources, }; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf) +{ + sa11x0_register_device(&sa11x0fb_device, inf); +} + static struct platform_device sa11x0pcmcia_device = { .name = "sa11x0-pcmcia", .id = -1, @@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash, } static struct resource sa11x0ir_resources[] = { - { - .start = __PREG(Ser2UTCR0), - .end = __PREG(Ser2UTCR0) + 0x24 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR0), - .end = __PREG(Ser2HSCR0) + 0x1c - 1, - .flags = IORESOURCE_MEM, - }, { - .start = __PREG(Ser2HSCR2), - .end = __PREG(Ser2HSCR2) + 0x04 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_Ser2ICP, - .end = IRQ_Ser2ICP, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24), + DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c), + DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04), + DEFINE_RES_IRQ(IRQ_Ser2ICP), }; static struct platform_device sa11x0ir_device = { @@ -358,14 +318,37 @@ static struct platform_device sa11x0rtc_device = { .resource = sa1100_rtc_resources, }; +static struct resource sa11x0dma_resources[] = { + DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE), + DEFINE_RES_IRQ(IRQ_DMA0), + DEFINE_RES_IRQ(IRQ_DMA1), + DEFINE_RES_IRQ(IRQ_DMA2), + DEFINE_RES_IRQ(IRQ_DMA3), + DEFINE_RES_IRQ(IRQ_DMA4), + DEFINE_RES_IRQ(IRQ_DMA5), +}; + +static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device sa11x0dma_device = { + .name = "sa11x0-dma", + .id = -1, + .dev = { + .dma_mask = &sa11x0dma_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sa11x0dma_resources), + .resource = sa11x0dma_resources, +}; + static struct platform_device *sa11x0_devices[] __initdata = { &sa11x0udc_device, &sa11x0uart1_device, &sa11x0uart3_device, &sa11x0ssp_device, &sa11x0pcmcia_device, - &sa11x0fb_device, &sa11x0rtc_device, + &sa11x0dma_device, }; static int __init sa1100_init(void) @@ -376,12 +359,6 @@ static int __init sa1100_init(void) arch_initcall(sa1100_init); -void (*sa1100fb_backlight_power)(int on); -void (*sa1100fb_lcd_power)(int on); - -EXPORT_SYMBOL(sa1100fb_backlight_power); -EXPORT_SYMBOL(sa1100fb_lcd_power); - /* * Common I/O mapping: @@ -436,7 +413,7 @@ void __init sa1100_map_io(void) * the MBGNT signal false to ensure the SA1111 doesn't own the * SDRAM bus. */ -void __init sa1110_mb_disable(void) +void sa1110_mb_disable(void) { unsigned long flags; @@ -455,7 +432,7 @@ void __init sa1110_mb_disable(void) * If the system is going to use the SA-1111 DMA engines, set up * the memory bus request/grant pins. */ -void __devinit sa1110_mb_enable(void) +void sa1110_mb_enable(void) { unsigned long flags; diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 33268cf6be3..9eb3b3cd5a6 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *); mi->bank[__nr].start = (__start), \ mi->bank[__nr].size = (__size) -extern void (*sa1100fb_backlight_power)(int on); -extern void (*sa1100fb_lcd_power)(int on); - extern void sa1110_mb_enable(void); extern void sa1110_mb_disable(void); @@ -39,4 +36,8 @@ struct irda_platform_data; void sa11x0_register_irda(struct irda_platform_data *irda); struct mcp_plat_data; +void sa11x0_ppc_configure_mcp(void); void sa11x0_register_mcp(struct mcp_plat_data *data); + +struct sa1100fb_mach_info; +void sa11x0_register_lcd(struct sa1100fb_mach_info *inf); diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 1e6b3c105ba..b2e8d0f418e 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable) } } +static struct sa1100fb_mach_info h3100_lcd_info = { + .pixclock = 406977, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 26, .vsync_len = 41, + .left_margin = 4, .upper_margin = 0, + .right_margin = 4, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 1, + .cmap_inverse = 1, + + .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .lcd_power = h3100_lcd_power, +}; static void __init h3100_map_io(void) { h3xxx_map_io(); - sa1100fb_lcd_power = h3100_lcd_power; - /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ GAFR &= ~0x000001fb; @@ -80,12 +98,15 @@ static void __init h3100_mach_init(void) { h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3100_lcd_info); sa11x0_register_irda(&h3100_irda_data); } MACHINE_START(H3100, "Compaq iPAQ H3100") .atag_offset = 0x100, .map_io = h3100_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3100_mach_init, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 6b58e7460ec..cb6659f294f 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -14,11 +14,14 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <video/sa1100fb.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/irda.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -56,11 +59,35 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON); err1: return; } +static const struct sa1100fb_rgb h3600_rgb_16 = { + .red = { .offset = 12, .length = 4, }, + .green = { .offset = 7, .length = 4, }, + .blue = { .offset = 1, .length = 4, }, + .transp = { .offset = 0, .length = 0, }, +}; + +static struct sa1100fb_mach_info h3600_lcd_info = { + .pixclock = 174757, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 3, .vsync_len = 3, + .left_margin = 12, .upper_margin = 10, + .right_margin = 17, .lower_margin = 1, + + .cmap_static = 1, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + + .rgb[RGB_16] = &h3600_rgb_16, + + .lcd_power = h3600_lcd_power, +}; + + static void __init h3600_map_io(void) { h3xxx_map_io(); - - sa1100fb_lcd_power = h3600_lcd_power; } /* @@ -121,12 +148,15 @@ static void __init h3600_mach_init(void) { h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio)); h3xxx_mach_init(); + + sa11x0_register_lcd(&h3600_lcd_info); sa11x0_register_irda(&h3600_irda_data); } MACHINE_START(H3600, "Compaq iPAQ H3600") .atag_offset = 0x100, .map_io = h3600_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3600_mach_init, diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index b0784c974c2..63150e1ffe9 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = { .nr_parts = ARRAY_SIZE(h3xxx_partitions), }; -static struct resource h3xxx_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource h3xxx_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); /* @@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = { */ static struct resource egpio_resources[] = { - [0] = { - .start = H3600_EGPIO_PHYS, - .end = H3600_EGPIO_PHYS + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4), }; static struct htc_egpio_chip egpio_chips[] = { diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index c01bb36db94..5535475bf58 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -22,12 +22,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -35,6 +33,9 @@ #include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /********************************************************************** @@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = { .nr_parts = ARRAY_SIZE(hackkit_partitions), }; -static struct resource hackkit_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M, - .flags = IORESOURCE_MEM, -}; +static struct resource hackkit_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init hackkit_init(void) { @@ -197,6 +195,7 @@ static void __init hackkit_init(void) MACHINE_START(HACKKIT, "HackKit Cpu Board") .atag_offset = 0x100, .map_io = hackkit_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index bae8296f5db..3f2d1b60188 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1590,224 +1590,9 @@ /* * Direct Memory Access (DMA) control registers - * - * Registers - * DDAR0 Direct Memory Access (DMA) Device Address Register - * channel 0 (read/write). - * DCSR0 Direct Memory Access (DMA) Control and Status - * Register channel 0 (read/write). - * DBSA0 Direct Memory Access (DMA) Buffer Start address - * register A channel 0 (read/write). - * DBTA0 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 0 (read/write). - * DBSB0 Direct Memory Access (DMA) Buffer Start address - * register B channel 0 (read/write). - * DBTB0 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 0 (read/write). - * - * DDAR1 Direct Memory Access (DMA) Device Address Register - * channel 1 (read/write). - * DCSR1 Direct Memory Access (DMA) Control and Status - * Register channel 1 (read/write). - * DBSA1 Direct Memory Access (DMA) Buffer Start address - * register A channel 1 (read/write). - * DBTA1 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 1 (read/write). - * DBSB1 Direct Memory Access (DMA) Buffer Start address - * register B channel 1 (read/write). - * DBTB1 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 1 (read/write). - * - * DDAR2 Direct Memory Access (DMA) Device Address Register - * channel 2 (read/write). - * DCSR2 Direct Memory Access (DMA) Control and Status - * Register channel 2 (read/write). - * DBSA2 Direct Memory Access (DMA) Buffer Start address - * register A channel 2 (read/write). - * DBTA2 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 2 (read/write). - * DBSB2 Direct Memory Access (DMA) Buffer Start address - * register B channel 2 (read/write). - * DBTB2 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 2 (read/write). - * - * DDAR3 Direct Memory Access (DMA) Device Address Register - * channel 3 (read/write). - * DCSR3 Direct Memory Access (DMA) Control and Status - * Register channel 3 (read/write). - * DBSA3 Direct Memory Access (DMA) Buffer Start address - * register A channel 3 (read/write). - * DBTA3 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 3 (read/write). - * DBSB3 Direct Memory Access (DMA) Buffer Start address - * register B channel 3 (read/write). - * DBTB3 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 3 (read/write). - * - * DDAR4 Direct Memory Access (DMA) Device Address Register - * channel 4 (read/write). - * DCSR4 Direct Memory Access (DMA) Control and Status - * Register channel 4 (read/write). - * DBSA4 Direct Memory Access (DMA) Buffer Start address - * register A channel 4 (read/write). - * DBTA4 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 4 (read/write). - * DBSB4 Direct Memory Access (DMA) Buffer Start address - * register B channel 4 (read/write). - * DBTB4 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 4 (read/write). - * - * DDAR5 Direct Memory Access (DMA) Device Address Register - * channel 5 (read/write). - * DCSR5 Direct Memory Access (DMA) Control and Status - * Register channel 5 (read/write). - * DBSA5 Direct Memory Access (DMA) Buffer Start address - * register A channel 5 (read/write). - * DBTA5 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 5 (read/write). - * DBSB5 Direct Memory Access (DMA) Buffer Start address - * register B channel 5 (read/write). - * DBTB5 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 5 (read/write). */ - -#define DMASp 0x00000020 /* DMA control reg. Space [byte] */ - -#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */ -#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */ -#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */ -#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */ -#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */ -#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */ -#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */ -#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */ - -#define DDAR_RW 0x00000001 /* device data Read/Write */ -#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ - /* (memory -> device) */ -#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ - /* (device -> memory) */ -#define DDAR_E 0x00000002 /* big/little Endian device */ -#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ -#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ -#define DDAR_BS 0x00000004 /* device Burst Size */ -#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ -#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ -#define DDAR_DW 0x00000008 /* device Data Width */ -#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ -#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ -#define DDAR_DS Fld (4, 4) /* Device Select */ -#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ - (0x0 << FShft (DDAR_DS)) -#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ - (0x1 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ - (0x2 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ - (0x3 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ - (0x4 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ - (0x5 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ - (0x6 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ - (0x7 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ - (0x8 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ - (0x9 << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ - /* (audio) */ \ - (0xA << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ - /* (audio) */ \ - (0xB << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ - /* (telecom) */ \ - (0xC << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ - /* (telecom) */ \ - (0xD << FShft (DDAR_DS)) -#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ - (0xE << FShft (DDAR_DS)) -#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ - (0xF << FShft (DDAR_DS)) -#define DDAR_DA Fld (24, 8) /* Device Address */ -#define DDAR_DevAdd(Add) /* Device Address */ \ - (((Add) & 0xF0000000) | \ - (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) -#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ - /* (telecom) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ - /* (telecom) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) - -#define DCSR_RUN 0x00000001 /* DMA running */ -#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ -#define DCSR_ERROR 0x00000004 /* DMA ERROR */ -#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ -#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ -#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ -#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ -#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ -#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ -#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ - -#define DBT_TC Fld (13, 0) /* Transfer Count */ -#define DBTA_TCA DBT_TC /* Transfer Count buffer A */ -#define DBTB_TCB DBT_TC /* Transfer Count buffer B */ +#define DMA_SIZE (6 * 0x20) +#define DMA_PHYS 0xb0000000 /* @@ -1903,16 +1688,6 @@ #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ /* (Alternative) */ -#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */ -#define LCSR __REG(0xB0100004) /* LCD Status Reg. */ -#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */ -#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */ -#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */ -#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */ -#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */ -#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */ -#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */ - #define LCCR0_LEN 0x00000001 /* LCD ENable */ #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 52acda7061b..f33679d2d3e 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-sa1100/include/mach/collie.h * - * This file contains the hardware specific definitions for Assabet + * This file contains the hardware specific definitions for Collie * Only include this file from SA1100-specific files. * * ChangeLog: @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H +extern void locomolcd_power(int on); #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) #define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0) diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h deleted file mode 100644 index dda1b351310..00000000000 --- a/arch/arm/mach-sa1100/include/mach/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/dma.h - * - * Generic SA1100 DMA support - * - * Copyright (C) 2000 Nicolas Pitre - * - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "hardware.h" - - -/* - * The SA1100 has six internal DMA channels. - */ -#define SA1100_DMA_CHANNELS 6 - -/* - * Maximum physical DMA buffer size - */ -#define MAX_DMA_SIZE 0x1fff -#define CUT_DMA_SIZE 0x1000 - -/* - * All possible SA1100 devices a DMA channel can be attached to. - */ -typedef enum { - DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ - DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ - DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ - DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ - DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ - DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ - DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ - DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ - DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ - DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ - DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ - DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ - DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ - DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ - DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ - DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ - DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ - DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ -} dma_device_t; - -typedef struct { - volatile u_long DDAR; - volatile u_long SetDCSR; - volatile u_long ClrDCSR; - volatile u_long RdDCSR; - volatile dma_addr_t DBSA; - volatile u_long DBTA; - volatile dma_addr_t DBSB; - volatile u_long DBTB; -} dma_regs_t; - -typedef void (*dma_callback_t)(void *data); - -/* - * DMA function prototypes - */ - -extern int sa1100_request_dma( dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **regs ); -extern void sa1100_free_dma( dma_regs_t *regs ); -extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); -extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); -extern void sa1100_reset_dma(dma_regs_t *regs); - -/** - * sa1100_stop_dma - stop DMA in progress - * @regs: identifier for the channel to use - * - * This stops DMA without clearing buffer pointers. Unlike - * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() - * or sa1100_get_dma_pos(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_resume_dma - resume DMA on a stopped channel - * @regs: identifier for the channel to use - * - * This resumes DMA on a channel previously stopped with - * sa1100_stop_dma(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_clear_dma - clear DMA pointers - * @regs: identifier for the channel to use - * - * This clear any DMA state so the DMA engine is ready to restart - * with new buffers through sa1100_start_dma(). Any buffers in flight - * are discarded. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h deleted file mode 100644 index dfc27ff0834..00000000000 --- a/arch/arm/mach-sa1100/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * __io() is required to be an equivalent mapping to __mem_pci() for - * SOC_COMMON to work. - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index d18f21abef8..3790298b714 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -71,22 +71,19 @@ /* * Figure out the MAX IRQ number. * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4 - * Otherwise, we have the standard IRQs only. + * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically + * allocate their IRQs above NR_IRQS. + * + * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has + * to be included in the NR_IRQS calculation. */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_BOARD_START + 4) +#ifdef CONFIG_SHARP_LOCOMO +#define NR_IRQS_LOCOMO 4 #else -#define NR_IRQS (IRQ_BOARD_START) +#define NR_IRQS_LOCOMO 0 #endif -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) +#ifndef NR_IRQS +#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) +#endif +#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index ed1a331508a..4b2860ae382 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -16,7 +16,7 @@ struct mcp_plat_data { u32 mccr0; u32 mccr1; unsigned int sclk_rate; - int gpio_base; + void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h index ffe2bc45eed..5516a52a329 100644 --- a/arch/arm/mach-sa1100/include/mach/neponset.h +++ b/arch/arm/mach-sa1100/include/mach/neponset.h @@ -15,54 +15,6 @@ /* * Neponset definitions: */ - -#define NEPONSET_CPLD_BASE (0x10000000) -#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000) -#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE) - -#define _IRR 0x10000024 /* Interrupt Reason Register */ -#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */ -#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */ -#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */ -#define _NCR_0 0x100000a0 /* Control Register (RW) */ -#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */ -#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */ -#define _SWPK 0x10000020 /* Switch pack (RO) */ -#define _WHOAMI 0x10000000 /* System ID Register (RO) */ - -#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */ - -#define IRR (*((volatile u_char *) Nep_p2v(_IRR))) -#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL))) -#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0))) -#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1))) -#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0))) -#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT))) -#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN))) -#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK))) -#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI))) - -#define LEDS (*((volatile Word *) Nep_p2v(_LEDS))) - -#define IRR_ETHERNET (1<<0) -#define IRR_USAR (1<<1) -#define IRR_SA1111 (1<<2) - -#define AUD_SEL_1341 (1<<0) -#define AUD_MUTE_1341 (1<<1) - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) - #define NCR_GP01_OFF (1<<0) #define NCR_TP_PWR_EN (1<<1) #define NCR_MS_PWR_EN (1<<2) @@ -71,4 +23,8 @@ #define NCR_A0VPP (1<<5) #define NCR_A1VPP (1<<6) +void neponset_ncr_frob(unsigned int, unsigned int); +#define neponset_ncr_set(v) neponset_ncr_frob(0, v) +#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0) + #endif diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h index 019f857a793..fff39e02b49 100644 --- a/arch/arm/mach-sa1100/include/mach/shannon.h +++ b/arch/arm/mach-sa1100/include/mach/shannon.h @@ -21,7 +21,7 @@ #define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */ #define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */ #define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */ -#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */ +#define SHANNON_GPIO_DISP_EN 22 /* out */ /* XXX GPIO 23 unaccounted for */ #define SHANNON_GPIO_EJECT_0 24 /* in */ #define SHANNON_GPIO_EJECT_1 25 /* in */ diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index dfbf824a69f..516ccc25d7f 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -17,6 +17,7 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/irq.h> #include "generic.h" @@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = { .irq_set_wake = sa1100_set_wake, }; -static struct resource irq_resource = { - .name = "irqs", - .start = 0x90050000, - .end = 0x9005ffff, -}; +static struct resource irq_resource = + DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); static struct sa1100irq_state { unsigned int saved; diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index ee121d6f048..ca7a7e83472 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -23,9 +23,7 @@ #include <linux/mtd/partitions.h> #include <video/s1d13xxxfb.h> -#include <mach/hardware.h> #include <asm/hardware/sa1111.h> -#include <asm/irq.h> #include <asm/page.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -34,6 +32,9 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #include "generic.h" /* @@ -46,7 +47,7 @@ /* memory space (line 52 of HP's doc) */ #define SA1111REGSTART 0x40000000 -#define SA1111REGLEN 0x00001fff +#define SA1111REGLEN 0x00002000 #define EPSONREGSTART 0x48000000 #define EPSONREGLEN 0x00100000 #define EPSONFBSTART 0x48200000 @@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = { }; static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = EPSONFBSTART, - .end = EPSONFBSTART + EPSONFBLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = EPSONREGSTART, - .end = EPSONREGSTART + EPSONREGLEN, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN), + [1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN), }; static struct platform_device s1d13xxxfb_device = { @@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = { }; static struct resource sa1111_resources[] = { - [0] = { - .start = SA1111REGSTART, - .end = SA1111REGSTART + SA1111REGLEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIO1, - .end = IRQ_GPIO1, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN), + [1] = DEFINE_RES_IRQ(IRQ_GPIO1), }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; static u64 sa1111_dmamask = 0xffffffffUL; @@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = { .pfn = __phys_to_pfn(EPSONFBSTART), .length = EPSONFBLEN, .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(SA1111REGSTART), - .length = SA1111REGLEN, - .type = MT_DEVICE } }; @@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = { .nr_parts = ARRAY_SIZE(jornada720_partitions), }; -static struct resource jornada720_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource jornada720_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); static void __init jornada720_mach_init(void) { @@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ .atag_offset = 0x100, .map_io = jornada720_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = jornada720_mach_init, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index af4e2761f3d..eb6534e0b0d 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -6,6 +6,8 @@ #include <linux/kernel.h> #include <linux/tty.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -15,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> +#include <mach/irqs.h> #include "generic.h" @@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = { .sclk_rate = 11981000, }; +#ifdef LART_GREY_LCD +static struct sa1100fb_mach_info lart_grey_info = { + .pixclock = 150000, .bpp = 4, + .xres = 320, .yres = 240, + + .hsync_len = 1, .vsync_len = 1, + .left_margin = 4, .upper_margin = 0, + .right_margin = 2, .lower_margin = 0, + + .cmap_greyscale = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_COLOR_LCD +static struct sa1100fb_mach_info lart_color_info = { + .pixclock = 150000, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 2, .vsync_len = 3, + .left_margin = 69, .upper_margin = 14, + .right_margin = 8, .lower_margin = 4, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif +#ifdef LART_VIDEO_OUT +static struct sa1100fb_mach_info lart_video_info = { + .pixclock = 39721, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 95, .vsync_len = 2, + .left_margin = 40, .upper_margin = 32, + .right_margin = 24, .lower_margin = 11, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), +}; +#endif + +#ifdef LART_KIT01_LCD +static struct sa1100fb_mach_info lart_kit01_info = { + .pixclock = 63291, .bpp = 16, + .xres = 640, .yres = 480, + + .hsync_len = 64, .vsync_len = 3, + .left_margin = 122, .upper_margin = 45, + .right_margin = 10, .lower_margin = 10, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg +}; +#endif + static void __init lart_init(void) { + struct sa1100fb_mach_info *inf = NULL; + +#ifdef LART_GREY_LCD + inf = &lart_grey_info; +#endif +#ifdef LART_COLOR_LCD + inf = &lart_color_info; +#endif +#ifdef LART_VIDEO_OUT + inf = &lart_video_info; +#endif +#ifdef LART_KIT01_LCD + inf = &lart_kit01_info; +#endif + + if (inf) + sa11x0_register_lcd(inf); + + sa11x0_ppc_configure_mcp(); sa11x0_register_mcp(&lart_mcp_data); } @@ -63,6 +144,7 @@ static void __init lart_map_io(void) MACHINE_START(LART, "LART") .atag_offset = 0x100, .map_io = lart_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_machine = lart_init, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c index 64e9b4b11b5..3699176bca9 100644 --- a/arch/arm/mach-sa1100/leds-assabet.c +++ b/arch/arm/mach-sa1100/leds-assabet.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include <mach/assabet.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c index cf1e38458b8..f99fac3eedb 100644 --- a/arch/arm/mach-sa1100/leds-badge4.c +++ b/arch/arm/mach-sa1100/leds-badge4.c @@ -14,7 +14,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c index 259b48e0be8..040540fb7d8 100644 --- a/arch/arm/mach-sa1100/leds-cerf.c +++ b/arch/arm/mach-sa1100/leds-cerf.c @@ -7,7 +7,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 2bce137462e..6a2352436e6 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c index 0505a1fdcdb..a51830c60e5 100644 --- a/arch/arm/mach-sa1100/leds-lart.c +++ b/arch/arm/mach-sa1100/leds-lart.c @@ -13,7 +13,6 @@ #include <mach/hardware.h> #include <asm/leds.h> -#include <asm/system.h> #include "leds.h" diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 85f6ee67222..8f6446b9f02 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <mach/nanoengine.h> +#include <mach/irqs.h> #include "generic.h" @@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = { }; static struct resource nanoengine_flash_resources[] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M), }; static struct map_desc nanoengine_io_desc[] __initdata = { @@ -114,6 +108,7 @@ static void __init nanoengine_init(void) MACHINE_START(NANOENGINE, "BSE nanoEngine") .atag_offset = 0x100, .map_io = nanoengine_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = nanoengine_init, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index b4fa53a1427..6c58f01b358 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -1,89 +1,104 @@ /* * linux/arch/arm/mach-sa1100/neponset.c - * */ -#include <linux/kernel.h> +#include <linux/err.h> #include <linux/init.h> -#include <linux/tty.h> #include <linux/ioport.h> -#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/serial_core.h> +#include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> -#include <mach/assabet.h> -#include <mach/neponset.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> -/* - * Install handler for Neponset IRQ. Note that we have to loop here - * since the ETHERNET and USAR IRQs are level based, and we need to - * ensure that the IRQ signal is deasserted before returning. This - * is rather unfortunate. - */ -static void -neponset_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int irr; - - while (1) { - /* - * Acknowledge the parent IRQ. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - /* - * Read the interrupt reason register. Let's have all - * active IRQ bits high. Note: there is a typo in the - * Neponset user's guide for the SA1111 IRR level. - */ - irr = IRR ^ (IRR_ETHERNET | IRR_USAR); - - if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) - break; - - /* - * Since there is no individual mask, we have to - * mask the parent IRQ. This is safe, since we'll - * recheck the register for any pending IRQs. - */ - if (irr & (IRR_ETHERNET | IRR_USAR)) { - desc->irq_data.chip->irq_mask(&desc->irq_data); - - /* - * Ack the interrupt now to prevent re-entering - * this neponset handler. Again, this is safe - * since we'll check the IRR register prior to - * leaving. - */ - desc->irq_data.chip->irq_ack(&desc->irq_data); +#include <mach/hardware.h> +#include <mach/assabet.h> +#include <mach/neponset.h> +#include <mach/irqs.h> + +#define NEP_IRQ_SMC91X 0 +#define NEP_IRQ_USAR 1 +#define NEP_IRQ_SA1111 2 +#define NEP_IRQ_NR 3 + +#define WHOAMI 0x00 +#define LEDS 0x10 +#define SWPK 0x20 +#define IRR 0x24 +#define KP_Y_IN 0x80 +#define KP_X_OUT 0x90 +#define NCR_0 0xa0 +#define MDM_CTL_0 0xb0 +#define MDM_CTL_1 0xb4 +#define AUD_CTL 0xc0 + +#define IRR_ETHERNET (1 << 0) +#define IRR_USAR (1 << 1) +#define IRR_SA1111 (1 << 2) + +#define MDM_CTL0_RTS1 (1 << 0) +#define MDM_CTL0_DTR1 (1 << 1) +#define MDM_CTL0_RTS2 (1 << 2) +#define MDM_CTL0_DTR2 (1 << 3) + +#define MDM_CTL1_CTS1 (1 << 0) +#define MDM_CTL1_DSR1 (1 << 1) +#define MDM_CTL1_DCD1 (1 << 2) +#define MDM_CTL1_CTS2 (1 << 3) +#define MDM_CTL1_DSR2 (1 << 4) +#define MDM_CTL1_DCD2 (1 << 5) + +#define AUD_SEL_1341 (1 << 0) +#define AUD_MUTE_1341 (1 << 1) - if (irr & IRR_ETHERNET) { - generic_handle_irq(IRQ_NEPONSET_SMC9196); - } +extern void sa1110_mb_disable(void); - if (irr & IRR_USAR) { - generic_handle_irq(IRQ_NEPONSET_USAR); - } +struct neponset_drvdata { + void __iomem *base; + struct platform_device *sa1111; + struct platform_device *smc91x; + unsigned irq_base; +#ifdef CONFIG_PM_SLEEP + u32 ncr0; + u32 mdm_ctl_0; +#endif +}; - desc->irq_data.chip->irq_unmask(&desc->irq_data); - } +static void __iomem *nep_base; - if (irr & IRR_SA1111) { - generic_handle_irq(IRQ_NEPONSET_SA1111); - } +void neponset_ncr_frob(unsigned int mask, unsigned int val) +{ + void __iomem *base = nep_base; + + if (base) { + unsigned long flags; + unsigned v; + + local_irq_save(flags); + v = readb_relaxed(base + NCR_0); + writeb_relaxed((v & ~mask) | val, base + NCR_0); + local_irq_restore(flags); + } else { + WARN(1, "nep_base unset\n"); } } static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) { - u_int mdm_ctl0 = MDM_CTL_0; + void __iomem *base = nep_base; + u_int mdm_ctl0; + if (!base) + return; + + mdm_ctl0 = readb_relaxed(base + MDM_CTL_0); if (port->mapbase == _Ser1UTCR0) { if (mctrl & TIOCM_RTS) mdm_ctl0 &= ~MDM_CTL0_RTS2; @@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) mdm_ctl0 |= MDM_CTL0_DTR1; } - MDM_CTL_0 = mdm_ctl0; + writeb_relaxed(mdm_ctl0, base + MDM_CTL_0); } static u_int neponset_get_mctrl(struct uart_port *port) { + void __iomem *base = nep_base; u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1 = MDM_CTL_1; + u_int mdm_ctl1; + + if (!base) + return ret; + mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); if (port->mapbase == _Ser1UTCR0) { if (mdm_ctl1 & MDM_CTL1_DCD2) ret &= ~TIOCM_CD; @@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = { .get_mctrl = neponset_get_mctrl, }; -static int __devinit neponset_probe(struct platform_device *dev) +/* + * Install handler for Neponset IRQ. Note that we have to loop here + * since the ETHERNET and USAR IRQs are level based, and we need to + * ensure that the IRQ signal is deasserted before returning. This + * is rather unfortunate. + */ +static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc) { - sa1100_register_uart_fns(&neponset_port_fns); + struct neponset_drvdata *d = irq_desc_get_handler_data(desc); + unsigned int irr; - /* - * Install handler for GPIO25. - */ - irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); - irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); + while (1) { + /* + * Acknowledge the parent IRQ. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); - /* - * We would set IRQ_GPIO25 to be a wake-up IRQ, but - * unfortunately something on the Neponset activates - * this IRQ on sleep (ethernet?) - */ -#if 0 - enable_irq_wake(IRQ_GPIO25); -#endif + /* + * Read the interrupt reason register. Let's have all + * active IRQ bits high. Note: there is a typo in the + * Neponset user's guide for the SA1111 IRR level. + */ + irr = readb_relaxed(d->base + IRR); + irr ^= IRR_ETHERNET | IRR_USAR; - /* - * Setup other Neponset IRQs. SA1111 will be done by the - * generic SA1111 code. - */ - irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); + if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) + break; - /* - * Disable GPIO 0/1 drivers so the buttons work on the module. - */ - NCR_0 = NCR_GP01_OFF; + /* + * Since there is no individual mask, we have to + * mask the parent IRQ. This is safe, since we'll + * recheck the register for any pending IRQs. + */ + if (irr & (IRR_ETHERNET | IRR_USAR)) { + desc->irq_data.chip->irq_mask(&desc->irq_data); - return 0; -} + /* + * Ack the interrupt now to prevent re-entering + * this neponset handler. Again, this is safe + * since we'll check the IRR register prior to + * leaving. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); -#ifdef CONFIG_PM + if (irr & IRR_ETHERNET) + generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); -/* - * LDM power management. - */ -static unsigned int neponset_saved_state; + if (irr & IRR_USAR) + generic_handle_irq(d->irq_base + NEP_IRQ_USAR); -static int neponset_suspend(struct platform_device *dev, pm_message_t state) -{ - /* - * Save state. - */ - neponset_saved_state = NCR_0; + desc->irq_data.chip->irq_unmask(&desc->irq_data); + } - return 0; + if (irr & IRR_SA1111) + generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); + } } -static int neponset_resume(struct platform_device *dev) +/* Yes, we really do not have any kind of masking or unmasking */ +static void nochip_noop(struct irq_data *irq) { - NCR_0 = neponset_saved_state; - - return 0; } -#else -#define neponset_suspend NULL -#define neponset_resume NULL -#endif - -static struct platform_driver neponset_device_driver = { - .probe = neponset_probe, - .suspend = neponset_suspend, - .resume = neponset_resume, - .driver = { - .name = "neponset", - }, -}; - -static struct resource neponset_resources[] = { - [0] = { - .start = 0x10000000, - .end = 0x17ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device neponset_device = { - .name = "neponset", - .id = 0, - .num_resources = ARRAY_SIZE(neponset_resources), - .resource = neponset_resources, -}; - -static struct resource sa1111_resources[] = { - [0] = { - .start = 0x40000000, - .end = 0x40001fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SA1111, - .end = IRQ_NEPONSET_SA1111, - .flags = IORESOURCE_IRQ, - }, +static struct irq_chip nochip = { + .name = "neponset", + .irq_ack = nochip_noop, + .irq_mask = nochip_noop, + .irq_unmask = nochip_noop, }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .disable_devs = SA1111_DEVID_PS2_MSE, }; -static u64 sa1111_dmamask = 0xffffffffUL; +static int __devinit neponset_probe(struct platform_device *dev) +{ + struct neponset_drvdata *d; + struct resource *nep_res, *sa1111_res, *smc91x_res; + struct resource sa1111_resources[] = { + DEFINE_RES_MEM(0x40000000, SZ_8K), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info sa1111_devinfo = { + .parent = &dev->dev, + .name = "sa1111", + .id = 0, + .res = sa1111_resources, + .num_res = ARRAY_SIZE(sa1111_resources), + .data = &sa1111_info, + .size_data = sizeof(sa1111_info), + .dma_mask = 0xffffffffUL, + }; + struct resource smc91x_resources[] = { + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, + 0x02000000, "smc91x-regs"), + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, + 0x02000000, "smc91x-attrib"), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info smc91x_devinfo = { + .parent = &dev->dev, + .name = "smc91x", + .id = 0, + .res = smc91x_resources, + .num_res = ARRAY_SIZE(smc91x_resources), + }; + int ret, irq; + + if (nep_base) + return -EBUSY; + + irq = ret = platform_get_irq(dev, 0); + if (ret < 0) + goto err_alloc; + + nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2); + if (!nep_res || !smc91x_res || !sa1111_res) { + ret = -ENXIO; + goto err_alloc; + } -static struct platform_device sa1111_device = { - .name = "sa1111", - .id = 0, - .dev = { - .dma_mask = &sa1111_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sa1111_info, - }, - .num_resources = ARRAY_SIZE(sa1111_resources), - .resource = sa1111_resources, -}; + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SA1100_CS3_PHYS, - .end = SA1100_CS3_PHYS + 0x01ffffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NEPONSET_SMC9196, - .end = IRQ_NEPONSET_SMC9196, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "smc91x-attrib", - .start = SA1100_CS3_PHYS + 0x02000000, - .end = SA1100_CS3_PHYS + 0x03ffffff, - .flags = IORESOURCE_MEM, - }, -}; + d->base = ioremap(nep_res->start, SZ_4K); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; + if (readb_relaxed(d->base + WHOAMI) != 0x11) { + dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n", + readb_relaxed(d->base + WHOAMI)); + ret = -ENODEV; + goto err_id; + } -static struct platform_device *devices[] __initdata = { - &neponset_device, - &sa1111_device, - &smc91x_device, -}; + ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); + if (ret <= 0) { + dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", + NEP_IRQ_NR, ret); + if (ret == 0) + ret = -ENOMEM; + goto err_irq_alloc; + } -extern void sa1110_mb_disable(void); + d->irq_base = ret; -static int __init neponset_init(void) -{ - platform_driver_register(&neponset_device_driver); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE); + irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); - /* - * The Neponset is only present on the Assabet machine type. - */ - if (!machine_is_assabet()) - return -ENODEV; + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(irq, d); + irq_set_chained_handler(irq, neponset_irq_handler); /* - * Ensure that the memory bus request/grant signals are setup, - * and the grant is held in its inactive state, whether or not - * we actually have a Neponset attached. + * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately + * something on the Neponset activates this IRQ on sleep (eth?) */ +#if 0 + enable_irq_wake(irq); +#endif + + dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", + d->irq_base, d->irq_base + NEP_IRQ_NR - 1); + nep_base = d->base; + + sa1100_register_uart_fns(&neponset_port_fns); + + /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); - if (!machine_has_neponset()) { - printk(KERN_DEBUG "Neponset expansion board not present\n"); - return -ENODEV; - } + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ + writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); - if (WHOAMI != 0x11) { - printk(KERN_WARNING "Neponset board detected, but " - "wrong ID: %02x\n", WHOAMI); - return -ENODEV; - } + sa1111_resources[0].parent = sa1111_res; + sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; + sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; + d->sa1111 = platform_device_register_full(&sa1111_devinfo); + + smc91x_resources[0].parent = smc91x_res; + smc91x_resources[1].parent = smc91x_res; + smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; + smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; + d->smc91x = platform_device_register_full(&smc91x_devinfo); + + platform_set_drvdata(dev, d); - return platform_add_devices(devices, ARRAY_SIZE(devices)); + return 0; + + err_irq_alloc: + err_id: + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; } -subsys_initcall(neponset_init); +static int __devexit neponset_remove(struct platform_device *dev) +{ + struct neponset_drvdata *d = platform_get_drvdata(dev); + int irq = platform_get_irq(dev, 0); + + if (!IS_ERR(d->sa1111)) + platform_device_unregister(d->sa1111); + if (!IS_ERR(d->smc91x)) + platform_device_unregister(d->smc91x); + irq_set_chained_handler(irq, NULL); + irq_free_descs(d->irq_base, NEP_IRQ_NR); + nep_base = NULL; + iounmap(d->base); + kfree(d); -static struct map_desc neponset_io_desc[] __initdata = { - { /* System Registers */ - .virtual = 0xf3000000, - .pfn = __phys_to_pfn(0x10000000), - .length = SZ_1M, - .type = MT_DEVICE - }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x40000000), - .length = SZ_1M, - .type = MT_DEVICE - } + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int neponset_suspend(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + d->ncr0 = readb_relaxed(d->base + NCR_0); + d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0); + + return 0; +} + +static int neponset_resume(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + + writeb_relaxed(d->ncr0, d->base + NCR_0); + writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0); + + return 0; +} + +static const struct dev_pm_ops neponset_pm_ops = { + .suspend_noirq = neponset_suspend, + .resume_noirq = neponset_resume, + .freeze_noirq = neponset_suspend, + .restore_noirq = neponset_resume, +}; +#define PM_OPS &neponset_pm_ops +#else +#define PM_OPS NULL +#endif + +static struct platform_driver neponset_device_driver = { + .probe = neponset_probe, + .remove = __devexit_p(neponset_remove), + .driver = { + .name = "neponset", + .owner = THIS_MODULE, + .pm = PM_OPS, + }, }; -void __init neponset_map_io(void) +static int __init neponset_init(void) { - iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc)); + return platform_driver_register(&neponset_device_driver); } + +subsys_initcall(neponset_init); diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index b466bca9c65..b49108b890a 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys &sys->resources); } -static struct resource pci_io_ports = { - .name = "PCI IO", - .start = 0x400, - .end = 0x7FF, - .flags = IORESOURCE_IO, -}; +static struct resource pci_io_ports = + DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO"); static struct resource pci_non_prefetchable_memory = { .name = "PCI non-prefetchable", diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 9307df05353..1602575a0d5 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -37,17 +37,9 @@ #define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21 static struct resource smc91x_resources[] = { - [0] = { - .start = PLEB_ETH0_P, - .end = PLEB_ETH0_P | 0x03ffffff, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000), #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */ - [1] = { - .start = IRQ_GPIO_ETH0_IRQ, - .end = IRQ_GPIO_ETH0_IRQ, - .flags = IORESOURCE_IRQ, - }, + [1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ), #endif }; @@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = { * the two SA1100 lowest chip select outputs. */ static struct resource pleb_flash_resources[] = { - [0] = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M), + [1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M), }; @@ -147,6 +131,7 @@ static void __init pleb_map_io(void) MACHINE_START(PLEB, "PLEB") .map_io = pleb_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index bf85b8b259d..2fa499ec6af 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <asm/memory.h> #include <asm/suspend.h> -#include <asm/system.h> #include <asm/mach/time.h> extern int sa1100_finish_suspend(unsigned long); diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 318b2b766a0..ca8bf59b904 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -9,6 +9,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> @@ -19,6 +21,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/shannon.h> +#include <mach/irqs.h> #include "generic.h" @@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = { .nr_parts = ARRAY_SIZE(shannon_partitions), }; -static struct resource shannon_flash_resource = { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_4M - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource shannon_flash_resource = + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M); static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, }; +static struct sa1100fb_mach_info shannon_lcd_info = { + .pixclock = 152500, .bpp = 8, + .xres = 640, .yres = 480, + + .hsync_len = 4, .vsync_len = 3, + .left_margin = 2, .upper_margin = 0, + .right_margin = 1, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, + .lccr3 = LCCR3_ACBsDiv(512), +}; + static void __init shannon_init(void) { + sa11x0_ppc_configure_mcp(); + sa11x0_register_lcd(&shannon_lcd_info); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mcp(&shannon_mcp_data); } @@ -84,6 +100,7 @@ static void __init shannon_map_io(void) MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .atag_offset = 0x100, .map_io = shannon_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index e17c04d6e32..3efae03cb3d 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -7,15 +7,15 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/proc_fs.h> -#include <linux/string.h> +#include <linux/string.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -26,6 +26,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/simpad.h> +#include <mach/irqs.h> #include <linux/serial_core.h> #include <linux/ioport.h> @@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = { static struct resource simpad_flash_resources [] = { - { - .start = SA1100_CS0_PHYS, - .end = SA1100_CS0_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - }, { - .start = SA1100_CS1_PHYS, - .end = SA1100_CS1_PHYS + SZ_16M -1, - .flags = IORESOURCE_MEM, - } + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M), + DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M), +}; + +static struct ucb1x00_plat_data simpad_ucb1x00_data = { + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, + .codec_pdata = &simpad_ucb1x00_data, }; @@ -376,6 +374,7 @@ static int __init simpad_init(void) pm_power_off = simpad_power_off; + sa11x0_ppc_configure_mcp(); sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); sa11x0_register_mcp(&simpad_mcp_data); @@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ .atag_offset = 0x100, .map_io = simpad_map_io, + .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index e8223315b44..30cc6721665 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -26,27 +26,36 @@ * * Causes sa11x0 to enter sleep state * + * Must be aligned to a cacheline. */ - + .balign 32 ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 - @ Adjust memory timing before lowering CPU clock - @ Clock speed adjustment without changing memory timing makes - @ CPU hang in some cases - ldr r0, =MDREFR - ldr r1, [r0] - orr r1, r1, #MDREFR_K1DB2 - str r1, [r0] + ldr r6, =MDREFR + ldr r4, [r6] + orr r4, r4, #MDREFR_K1DB2 + ldr r5, =PPCR + + @ Pre-load __udelay into the I-cache + mov r0, #1 + bl __udelay + mov r0, r0 + + @ The following must all exist in a single cache line to + @ avoid accessing memory until this sequence is complete, + @ otherwise we occasionally hang. + + @ Adjust memory timing before lowering CPU clock + str r4, [r6] @ delay 90us and set CPU PLL to lowest speed @ fixes resume problem on high speed SA1110 mov r0, #90 bl __udelay - ldr r0, =PPCR mov r1, #0 - str r1, [r0] + str r1, [r5] mov r0, #90 bl __udelay @@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend) bic r5, r5, #FMsk(MSC_RT) bic r5, r5, #FMsk(MSC_RT)<<16 - ldr r6, =MDREFR - ldr r7, [r6] -bic r7, r7, #0x0000FF00 -bic r7, r7, #0x000000F0 -orr r8, r7, #MDREFR_SLFRSH + bic r7, r7, #0x0000FF00 + bic r7, r7, #0x000000F0 + orr r8, r7, #MDREFR_SLFRSH ldr r9, =MDCNFG ldr r10, [r9] diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index b20ff93b84a..e22fca9ad5e 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -19,8 +19,8 @@ #include <linux/init.h> #include <linux/io.h> -#include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/hardware/ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 69e33535dee..6af26e8d55e 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -18,6 +18,7 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> #include <mach/hardware.h> +#include <mach/irqs.h> static u32 notrace sa1100_read_sched_clock(void) { |