Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board updates from Olof Johansson:
 "This branch contains board updates, mostly for shmobile, but also a
  couple for PXA.

  The shmobile platforms are still in the early stages of DT enablement,
  so there's a bit more updates here than we'd ideally want to see:
   - regulator updates to provide some fixed regulators on several
     boards
   - gpio support updates for multiple boards
   - misc updates for recently-introduced boards armadillo800eva and
     kzm9g
   - defconfig updates"

* tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER
  ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace
  ARM: shmobile: armadillo800eva: A3SP domain includes USB
  ARM: shmobile: armadillo800eva: A4LC domain includes LCDC
  ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode
  ARM: mach-shmobile: kzm9d: Add defconfig
  ARM: mach-shmobile: select the fixed regulator driver on several boards
  ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g
  ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently
  ARM: pxa: remove eseries.h
  ARM: mach-shmobile: add fixed voltage regulators to marzen
  ARM: mach-shmobile: add fixed voltage regulators to kzm9g
  ARM: mach-shmobile: add fixed voltage regulators to kzm9d
  ARM: mach-shmobile: add fixed voltage regulators to kota2
  ARM: mach-shmobile: add fixed voltage regulators to g4evm
  ARM: mach-shmobile: add fixed voltage regulators to bonito
  ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva
  ARM: mach-shmobile: add fixed voltage regulators to ap4evb
  ARM: mach-shmobile: add fixed voltage regulators to ag5evm
  ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel
  ...

1 files changed, 34 insertions, 25 deletions

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9640f34122b..7ea2b31e319 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pm_clock.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
@@ -203,31 +205,32 @@
  * amixer set "HPOUTR Mixer DACH" on
  */
 
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * gpio_pull_down
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
+/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
 {
-	__raw_writeb(0x00, addr);
-}
+	/*
+	 * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
+	 * Since we cannot support both voltages, we support the default 1.8V
+	 */
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
 
-static void __init gpio_pull_down(u32 addr)
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
 {
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xA0;
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
 
-	__raw_writeb(data, addr);
-}
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
 
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
@@ -1409,6 +1412,12 @@ static void __init mackerel_init(void)
 	u32 srcr4;
 	struct clk *clk;
 
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
 
@@ -1458,11 +1467,11 @@ static void __init mackerel_init(void)
 
 	/* USBHS0 */
 	gpio_request(GPIO_FN_VBUS0_0, NULL);
-	gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+	gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
 
 	/* USBHS1 */
 	gpio_request(GPIO_FN_VBUS0_1, NULL);
-	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+	gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
 	/* enable FSI2 port A (ak4643) */
@@ -1475,8 +1484,8 @@ static void __init mackerel_init(void)
 
 	gpio_request(GPIO_PORT9,  NULL);
 	gpio_request(GPIO_PORT10, NULL);
-	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
 
 	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */