Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

1 files changed, 35 insertions, 33 deletions

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 5c5bcb59535..acb46a94ccd 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
+#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
@@ -36,14 +37,13 @@
 #define SBAR		IOMEM(0xe6180020)
 #define APARMBAREA	IOMEM(0xe6f10020)
 
+#define PSTR_SHUTDOWN_MODE	3
+
 static void __iomem *scu_base_addr(void)
 {
 	return (void __iomem *)0xf0000000;
 }
 
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 void __init sh73a0_register_twd(void)
@@ -52,20 +52,6 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	spin_lock(&scu_lock);
-	tmp = __raw_readl(scu_base + 8);
-	tmp &= ~clr;
-	tmp |= set;
-	spin_unlock(&scu_lock);
-
-	/* disable cache coherency after releasing the lock */
-	__raw_writel(tmp, scu_base + 8);
-}
-
 static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -82,9 +68,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 {
 	cpu = cpu_logical_map(cpu);
 
-	/* enable cache coherency */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
 	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, WUPCR);	/* wake up */
 	else
@@ -95,16 +78,14 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu = cpu_logical_map(0);
-
 	scu_enable(scu_base_addr());
 
-	/* Map the reset vector (in headsmp.S) */
+	/* Map the reset vector (in headsmp-sh73a0.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
+	__raw_writel(__pa(sh73a0_secondary_vector), SBAR);
 
-	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+	/* enable cache coherency on booting CPU */
+	scu_power_mode(scu_base_addr(), SCU_PM_NORMAL);
 }
 
 static void __init sh73a0_smp_init_cpus(void)
@@ -114,16 +95,20 @@ static void __init sh73a0_smp_init_cpus(void)
 	shmobile_smp_init_cpus(ncores);
 }
 
-static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+#ifdef CONFIG_HOTPLUG_CPU
+static int sh73a0_cpu_kill(unsigned int cpu)
 {
+
 	int k;
+	u32 pstr;
 
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
+	/*
+	 * wait until the power status register confirms the shutdown of the
+	 * offline target
 	 */
 	for (k = 0; k < 1000; k++) {
-		if (shmobile_cpu_is_dead(cpu))
+		pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3;
+		if (pstr == PSTR_SHUTDOWN_MODE)
 			return 1;
 
 		mdelay(1);
@@ -132,6 +117,23 @@ static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
 	return 0;
 }
 
+static void sh73a0_cpu_die(unsigned int cpu)
+{
+	/*
+	 * The ARM MPcore does not issue a cache coherency request for the L1
+	 * cache when powering off single CPUs. We must take care of this and
+	 * further caches.
+	 */
+	dsb();
+	flush_cache_all();
+
+	/* Set power off mode. This takes the CPU out of the MP cluster */
+	scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
+
+	/* Enter shutdown mode */
+	cpu_do_idle();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_init_cpus		= sh73a0_smp_init_cpus,
@@ -140,7 +142,7 @@ struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= sh73a0_cpu_kill,
-	.cpu_die		= shmobile_cpu_die,
-	.cpu_disable		= shmobile_cpu_disable,
+	.cpu_die		= sh73a0_cpu_die,
+	.cpu_disable		= shmobile_cpu_disable_any,
 #endif
 };