summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
diff options
context:
space:
mode:
authorMagnus Damm <damm@opensource.se>2011-09-25 23:18:42 +0200
committerRafael J. Wysocki <rjw@sisk.pl>2011-09-25 23:18:42 +0200
commit06b841666a5a47918d31472dd77837906f999a9a (patch)
tree9afdaad5000daff16b995959fc2458ba338567a2 /arch/arm/mach-shmobile
parent0aa2a221696cc8ea20a4cdca01315d3b6b4ecc4d (diff)
ARM: mach-shmobile: sh7372 generic suspend/resume support
Convert the sh7372 Core Standby code to make use of the new generic ARM cpu suspend/resume code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Diffstat (limited to 'arch/arm/mach-shmobile')
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h3
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c36
-rw-r--r--arch/arm/mach-shmobile/sleep-sh7372.S230
3 files changed, 23 insertions, 246 deletions
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 06aecb31d9c..7b6f6f91da8 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -35,8 +35,7 @@ extern void sh7372_add_standard_devices(void);
extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void);
extern void sh7372_pm_init(void);
-extern void sh7372_cpu_suspend(void);
-extern void sh7372_cpu_resume(void);
+extern void sh7372_resume_core_standby(void);
extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk;
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index ac47bfcd287..aa7d352920d 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -21,6 +21,7 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
+#include <asm/suspend.h>
#include <mach/common.h>
#include <mach/sh7372.h>
@@ -152,30 +153,25 @@ struct sh7372_pm_domain sh7372_a3sg = {
#endif /* CONFIG_PM */
-static void sh7372_enter_core_standby(void)
+static int sh7372_do_idle_core_standby(unsigned long unused)
{
- void __iomem *smfram = (void __iomem *)SMFRAM;
-
- __raw_writel(0, APARMBAREA); /* translate 4k */
- __raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */
- __raw_writel(0x10, SYSTBCR); /* enable core standby */
-
- __raw_writel(0, smfram + 0x3c); /* clear page table address */
-
- sh7372_cpu_suspend();
- cpu_init();
+ cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */
+ return 0;
+}
- /* if page table address is non-NULL then we have been powered down */
- if (__raw_readl(smfram + 0x3c)) {
- __raw_writel(__raw_readl(smfram + 0x40),
- __va(__raw_readl(smfram + 0x3c)));
+static void sh7372_enter_core_standby(void)
+{
+ /* set reset vector, translate 4k */
+ __raw_writel(__pa(sh7372_resume_core_standby), SBAR);
+ __raw_writel(0, APARMBAREA);
- flush_tlb_all();
- set_cr(__raw_readl(smfram + 0x38));
- }
+ /* enter sleep mode with SYSTBCR to 0x10 */
+ __raw_writel(0x10, SYSTBCR);
+ cpu_suspend(0, sh7372_do_idle_core_standby);
+ __raw_writel(0, SYSTBCR);
- __raw_writel(0, SYSTBCR); /* disable core standby */
- __raw_writel(0, SBAR); /* disable reset vector translation */
+ /* disable reset vector translation */
+ __raw_writel(0, SBAR);
}
#ifdef CONFIG_CPU_IDLE
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index d37d3ca4d18..dedf6126789 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -30,231 +30,13 @@
*/
#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
#include <asm/assembler.h>
-#define SMFRAM 0xe6a70000
-
- .align
-kernel_flush:
- .word v7_flush_dcache_all
-
- .align 3
-ENTRY(sh7372_cpu_suspend)
- stmfd sp!, {r0-r12, lr} @ save registers on stack
-
- ldr r8, =SMFRAM
-
- mov r4, sp @ Store sp
- mrs r5, spsr @ Store spsr
- mov r6, lr @ Store lr
- stmia r8!, {r4-r6}
-
- mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
- mrc p15, 0, r5, c2, c0, 0 @ TTBR0
- mrc p15, 0, r6, c2, c0, 1 @ TTBR1
- mrc p15, 0, r7, c2, c0, 2 @ TTBCR
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mrc p15, 0, r5, c10, c2, 0 @ PRRR
- mrc p15, 0, r6, c10, c2, 1 @ NMRR
- stmia r8!,{r4-r6}
-
- mrc p15, 0, r4, c13, c0, 1 @ Context ID
- mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- mrs r7, cpsr @ Store current cpsr
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c1, c0, 0 @ save control register
- stmia r8!, {r4}
-
- /*
- * jump out to kernel flush routine
- * - reuse that code is better
- * - it executes in a cached space so is faster than refetch per-block
- * - should be faster and will change with kernel
- * - 'might' have to copy address, load and jump to it
- * Flush all data from the L1 data cache before disabling
- * SCTLR.C bit.
- */
- ldr r1, kernel_flush
- mov lr, pc
- bx r1
-
- /*
- * Clear the SCTLR.C bit to prevent further data cache
- * allocation. Clearing SCTLR.C would make all the data accesses
- * strongly ordered and would not hit the cache.
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #(1 << 2) @ Disable the C bit
- mcr p15, 0, r0, c1, c0, 0
- isb
-
- /*
- * Invalidate L1 data cache. Even though only invalidate is
- * necessary exported flush API is used here. Doing clean
- * on already clean cache would be almost NOP.
- */
- ldr r1, kernel_flush
- blx r1
- /*
- * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
- * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
- * This sequence switches back to ARM. Note that .align may insert a
- * nop: bx pc needs to be word-aligned in order to work.
- */
- THUMB( .thumb )
- THUMB( .align )
- THUMB( bx pc )
- THUMB( nop )
- .arm
-
- /* Data memory barrier and Data sync barrier */
- dsb
- dmb
-
-/*
- * ===================================
- * == WFI instruction => Enter idle ==
- * ===================================
- */
- wfi @ wait for interrupt
-
-/*
- * ===================================
- * == Resume path for non-OFF modes ==
- * ===================================
- */
- mrc p15, 0, r0, c1, c0, 0
- tst r0, #(1 << 2) @ Check C bit enabled?
- orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
- mcreq p15, 0, r0, c1, c0, 0
- isb
-
-/*
- * ===================================
- * == Exit point from non-OFF modes ==
- * ===================================
- */
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
-
- .pool
-
.align 12
.text
- .global sh7372_cpu_resume
-sh7372_cpu_resume:
-
- mov r1, #0
- /*
- * Invalidate all instruction caches to PoU
- * and flush branch target cache
- */
- mcr p15, 0, r1, c7, c5, 0
-
- ldr r3, =SMFRAM
-
- ldmia r3!, {r4-r6}
- mov sp, r4 @ Restore sp
- msr spsr_cxsf, r5 @ Restore spsr
- mov lr, r6 @ Restore lr
-
- ldmia r3!, {r4-r7}
- mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
- mcr p15, 0, r5, c2, c0, 0 @ TTBR0
- mcr p15, 0, r6, c2, c0, 1 @ TTBR1
- mcr p15, 0, r7, c2, c0, 2 @ TTBCR
-
- ldmia r3!,{r4-r6}
- mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mcr p15, 0, r5, c10, c2, 0 @ PRRR
- mcr p15, 0, r6, c10, c2, 1 @ NMRR
-
- ldmia r3!,{r4-r7}
- mcr p15, 0, r4, c13, c0, 1 @ Context ID
- mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- msr cpsr, r7 @ store cpsr
-
- /* Starting to enable MMU here */
- mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
- and r7, #0x7
- cmp r7, #0x0
- beq usettbr0
-ttbr_error:
- /*
- * More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
- b ttbr_error
-
- .align
-cache_pred_disable_mask:
- .word 0xFFFFE7FB
-ttbrbit_mask:
- .word 0xFFFFC000
-table_index_mask:
- .word 0xFFF00000
-table_entry:
- .word 0x00000C02
-usettbr0:
-
- mrc p15, 0, r2, c2, c0, 0
- ldr r5, ttbrbit_mask
- and r2, r5
- mov r4, pc
- ldr r5, table_index_mask
- and r4, r5 @ r4 = 31 to 20 bits of pc
- /* Extract the value to be written to table entry */
- ldr r6, table_entry
- /* r6 has the value to be written to table entry */
- add r6, r6, r4
- /* Getting the address of table entry to modify */
- lsr r4, #18
- /* r2 has the location which needs to be modified */
- add r2, r4
- ldr r4, [r2]
- str r6, [r2] /* modify the table entry */
-
- mov r7, r6
- mov r5, r2
- mov r6, r4
- /* r5 = original page table address */
- /* r6 = original page table data */
-
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
- mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
- mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
- mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
-
- /*
- * Restore control register. This enables the MMU.
- * The caches and prediction are not enabled here, they
- * will be enabled after restoring the MMU table entry.
- */
- ldmia r3!, {r4}
- stmia r3!, {r5} /* save original page table address */
- stmia r3!, {r6} /* save original page table data */
- stmia r3!, {r7} /* save modified page table data */
-
- ldr r2, cache_pred_disable_mask
- and r4, r2
- mcr p15, 0, r4, c1, c0, 0
- dsb
- isb
-
- ldr r0, =restoremmu_on
- bx r0
-
-/*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
- */
-restoremmu_on:
-
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+ .global sh7372_resume_core_standby
+sh7372_resume_core_standby:
+ ldr pc, 1f
+1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET