Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

12 files changed, 1290 insertions, 8 deletions

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 7dcf08ee979..98327b7a503 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -99,6 +99,12 @@ config MACH_BONITO
 	select ARCH_REQUIRE_GPIOLIB
 	depends on ARCH_R8A7740
 
+config MACH_ARMADILLO800EVA
+	bool "Armadillo-800 EVA board"
+	depends on ARCH_R8A7740
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
@@ -109,6 +115,12 @@ config MACH_KZM9D
 	depends on ARCH_EMEV2
 	select USE_OF
 
+config MACH_KZM9G
+	bool "KZM-A9-GT board"
+	depends on ARCH_SH73A0
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 comment "SH-Mobile System Configuration"
 
 config CPU_HAS_INTEVT
@@ -121,7 +133,8 @@ config MEMORY_START
 	hex "Physical memory start address"
 	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO
+				MACH_MACKEREL || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
@@ -133,7 +146,8 @@ config MEMORY_SIZE
 	hex "Physical memory size"
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO
+	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
 	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index c795335931c..e6b177bc941 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -51,7 +51,9 @@ obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index b56dde2732b..0c3caeba2f3 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -997,6 +997,8 @@ static struct sh_mobile_ceu_companion csi2 = {
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 	.csi2 = &csi2,
 };
 
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
new file mode 100644
index 00000000000..9e37026ef9d
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -0,0 +1,784 @@
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/r8a7740.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * CON1		Camera Module
+ * CON2		Extension Bus
+ * CON3		HDMI Output
+ * CON4		Composite Video Output
+ * CON5		H-UDI JTAG
+ * CON6		ARM JTAG
+ * CON7		SD1
+ * CON8		SD2
+ * CON9		RTC BackUp
+ * CON10	Monaural Mic Input
+ * CON11	Stereo Headphone Output
+ * CON12	Audio Line Output(L)
+ * CON13	Audio Line Output(R)
+ * CON14	AWL13 Module
+ * CON15	Extension
+ * CON16	LCD1
+ * CON17	LCD2
+ * CON19	Power Input
+ * CON20	USB1
+ * CON21	USB2
+ * CON22	Serial
+ * CON23	LAN
+ * CON24	USB3
+ * LED1		Camera LED(Yellow)
+ * LED2		Power LED (Green)
+ * ED3-LED6	User LED(Yellow)
+ * LED7		LAN link LED(Green)
+ * LED8		LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ *                    SW1
+ *
+ * -12345678-+---------------+----------------------------
+ *  1        | boot          | hermit
+ *  0        | boot          | OS auto boot
+ * -12345678-+---------------+----------------------------
+ *   00      | boot device   | eMMC
+ *   10      | boot device   | SDHI0 (CON7)
+ *   01      | boot device   | -
+ *   11      | boot device   | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ *     0     | Extension Bus | D8-D15 disable, eMMC enable
+ *     1     | Extension Bus | D8-D15 enable,  eMMC disable
+ * -12345678-+---------------+----------------------------
+ *      0    | SDHI1         | COM8 disable, COM14 enable
+ *      1    | SDHI1         | COM8 enable,  COM14 disable
+ * -12345678-+---------------+----------------------------
+ *       0   | USB0          | COM20 enable,  COM24 disable
+ *       1   | USB0          | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ *        00 | JTAG          | SH-X2
+ *        10 | JTAG          | ARM
+ *        01 | JTAG          | -
+ *        11 | JTAG          | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ *	usbhsf_power_ctrl()
+ *
+ * CAUTION
+ *
+ * It uses autonomy mode for USB hotplug at this point
+ * (= usbhs_private.platform_callback.get_vbus is NULL),
+ * since we don't know what's happen on PM control
+ * on this workaround.
+ */
+#define USBCR1		0xe605810a
+#define USBH		0xC6700000
+#define USBH_USBCTR	0x10834
+
+struct usbhsf_private {
+	struct clk *phy;
+	struct clk *usb24;
+	struct clk *pci;
+	struct clk *func;
+	struct clk *host;
+	void __iomem *usbh_base;
+	struct renesas_usbhs_platform_info info;
+};
+
+#define usbhsf_get_priv(pdev)				\
+	container_of(renesas_usbhs_get_info(pdev),	\
+		     struct usbhsf_private, info)
+
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static void usbhsf_power_ctrl(struct platform_device *pdev,
+			      void __iomem *base, int enable)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	/*
+	 * Work around for USB Function.
+	 * It needs USB host clock, and settings
+	 */
+	if (enable) {
+		/*
+		 * enable all the related usb clocks
+		 * for usb workaround
+		 */
+		clk_enable(priv->usb24);
+		clk_enable(priv->pci);
+		clk_enable(priv->host);
+		clk_enable(priv->func);
+		clk_enable(priv->phy);
+
+		/*
+		 * set USBCR1
+		 *
+		 * Port1 is driven by USB function,
+		 * Port2 is driven by USB HOST
+		 * One HOST (Port1 or Port2 is HOST)
+		 * USB PLL input clock = 24MHz
+		 */
+		__raw_writew(0xd750, USBCR1);
+		mdelay(1);
+
+		/*
+		 * start USB Host
+		 */
+		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
+		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
+		mdelay(10);
+
+		/*
+		 * USB PHY Power ON
+		 */
+		__raw_writew(0xd770, USBCR1);
+		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
+
+	} else {
+		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
+		__raw_writew(0xd7c0, USBCR1); /* GPIO */
+
+		clk_disable(priv->phy);
+		clk_disable(priv->func);	/* usb work around */
+		clk_disable(priv->host);	/* usb work around */
+		clk_disable(priv->pci);		/* usb work around */
+		clk_disable(priv->usb24);	/* usb work around */
+	}
+}
+
+static void usbhsf_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	if (!IS_ERR(priv->phy))
+		clk_put(priv->phy);
+	if (!IS_ERR(priv->usb24))
+		clk_put(priv->usb24);
+	if (!IS_ERR(priv->pci))
+		clk_put(priv->pci);
+	if (!IS_ERR(priv->host))
+		clk_put(priv->host);
+	if (!IS_ERR(priv->func))
+		clk_put(priv->func);
+	if (priv->usbh_base)
+		iounmap(priv->usbh_base);
+
+	priv->phy	= NULL;
+	priv->usb24	= NULL;
+	priv->pci	= NULL;
+	priv->host	= NULL;
+	priv->func	= NULL;
+	priv->usbh_base	= NULL;
+}
+
+static int usbhsf_hardware_init(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	priv->phy	= clk_get(&pdev->dev, "phy");
+	priv->usb24	= clk_get(&pdev->dev, "usb24");
+	priv->pci	= clk_get(&pdev->dev, "pci");
+	priv->func	= clk_get(&pdev->dev, "func");
+	priv->host	= clk_get(&pdev->dev, "host");
+	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
+
+	if (IS_ERR(priv->phy)		||
+	    IS_ERR(priv->usb24)		||
+	    IS_ERR(priv->pci)		||
+	    IS_ERR(priv->host)		||
+	    IS_ERR(priv->func)		||
+	    !priv->usbh_base) {
+		dev_err(&pdev->dev, "USB clock setting failed\n");
+		usbhsf_hardware_exit(pdev);
+		return -EIO;
+	}
+
+	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
+	clk_set_rate(priv->usb24,
+		     clk_get_rate(clk_get_parent(priv->usb24)));
+
+	return 0;
+}
+
+static struct usbhsf_private usbhsf_private = {
+	.info = {
+		.platform_callback = {
+			.get_id		= usbhsf_get_id,
+			.hardware_init	= usbhsf_hardware_init,
+			.hardware_exit	= usbhsf_hardware_exit,
+			.power_ctrl	= usbhsf_power_ctrl,
+		},
+		.driver_param = {
+			.buswait_bwait		= 5,
+			.detection_delay	= 5,
+		},
+	}
+};
+
+static struct resource usbhsf_resources[] = {
+	{
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe6890104 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= evt2irq(0x0A20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhsf_device = {
+	.name	= "renesas_usbhs",
+	.dev = {
+		.platform_data = &usbhsf_private.info,
+	},
+	.id = -1,
+	.num_resources	= ARRAY_SIZE(usbhsf_resources),
+	.resource	= usbhsf_resources,
+};
+
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+	.phy			= 0x00, /* LAN8710A */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.register_type		= SH_ETH_REG_GIGABIT,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+	{
+		.start	= 0xe9a00000,
+		.end	= 0xe9a00800 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xe9a01800,
+		.end	= 0xe9a02000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x0500),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id = -1,
+	.dev = {
+		.platform_data = &sh_eth_platdata,
+	},
+	.resource = sh_eth_resources,
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
+/* LCDC */
+static struct fb_videomode lcdc0_mode = {
+	.name		= "AMPIER/AM-800480",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source	= LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.lcd_modes	= &lcdc0_mode,
+		.num_modes	= 1,
+		.panel_cfg = {
+			.width	= 111,
+			.height = 68,
+		},
+	},
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCD0",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.resource	= lcdc0_resources,
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name   = "gpio-keys",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* SDHI0 */
+/*
+ * FIXME
+ *
+ * It use polling mode here, since
+ * CD (= Card Detect) pin is not connected to SDHI0_CD.
+ * We can use IRQ31 as card detect irq,
+ * but it needs chattering removal operation
+ */
+#define IRQ31	evt2irq(0x33E0)
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
+			  MMC_CAP_NEEDS_POLL,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+	{
+		.name	= "SDHI0",
+		.start	= 0xe6850000,
+		.end	= 0xe6850100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/*
+	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
+	 */
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= evt2irq(0x0E20),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= evt2irq(0x0E40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sdhi0_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0xe6860000,
+		.end	= 0xe6860100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0E80),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x0EA0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= evt2irq(0x0EC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &sdhi1_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi1_resources),
+	.resource	= sdhi1_resources,
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd0100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1AC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1AE0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = evt2irq(0x0340),
+	},
+};
+
+/*
+ * board devices
+ */
+static struct platform_device *eva_devices[] __initdata = {
+	&lcdc0_device,
+	&gpio_keys_device,
+	&sh_eth_device,
+	&sdhi0_device,
+	&sh_mmcif_device,
+};
+
+static void __init eva_clock_init(void)
+{
+	struct clk *system	= clk_get(NULL, "system_clk");
+	struct clk *xtal1	= clk_get(NULL, "extal1");
+	struct clk *usb24s	= clk_get(NULL, "usb24s");
+
+	if (IS_ERR(system)	||
+	    IS_ERR(xtal1)	||
+	    IS_ERR(usb24s)) {
+		pr_err("armadillo800eva board clock init failed\n");
+		goto clock_error;
+	}
+
+	/* armadillo 800 eva extal1 is 24MHz */
+	clk_set_rate(xtal1, 24000000);
+
+	/* usb24s use extal1 (= system) clock (= 24MHz) */
+	clk_set_parent(usb24s, system);
+
+clock_error:
+	if (!IS_ERR(system))
+		clk_put(system);
+	if (!IS_ERR(xtal1))
+		clk_put(xtal1);
+	if (!IS_ERR(usb24s))
+		clk_put(usb24s);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+	eva_clock_init();
+
+	r8a7740_pinmux_init();
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+
+	/* LCDC0 */
+	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
+	gpio_request(GPIO_FN_LCD0_D0,		NULL);
+	gpio_request(GPIO_FN_LCD0_D1,		NULL);
+	gpio_request(GPIO_FN_LCD0_D2,		NULL);
+	gpio_request(GPIO_FN_LCD0_D3,		NULL);
+	gpio_request(GPIO_FN_LCD0_D4,		NULL);
+	gpio_request(GPIO_FN_LCD0_D5,		NULL);
+	gpio_request(GPIO_FN_LCD0_D6,		NULL);
+	gpio_request(GPIO_FN_LCD0_D7,		NULL);
+	gpio_request(GPIO_FN_LCD0_D8,		NULL);
+	gpio_request(GPIO_FN_LCD0_D9,		NULL);
+	gpio_request(GPIO_FN_LCD0_D10,		NULL);
+	gpio_request(GPIO_FN_LCD0_D11,		NULL);
+	gpio_request(GPIO_FN_LCD0_D12,		NULL);
+	gpio_request(GPIO_FN_LCD0_D13,		NULL);
+	gpio_request(GPIO_FN_LCD0_D14,		NULL);
+	gpio_request(GPIO_FN_LCD0_D15,		NULL);
+	gpio_request(GPIO_FN_LCD0_D16,		NULL);
+	gpio_request(GPIO_FN_LCD0_D17,		NULL);
+	gpio_request(GPIO_FN_LCD0_D18_PORT40,	NULL);
+	gpio_request(GPIO_FN_LCD0_D19_PORT4,	NULL);
+	gpio_request(GPIO_FN_LCD0_D20_PORT3,	NULL);
+	gpio_request(GPIO_FN_LCD0_D21_PORT2,	NULL);
+	gpio_request(GPIO_FN_LCD0_D22_PORT0,	NULL);
+	gpio_request(GPIO_FN_LCD0_D23_PORT1,	NULL);
+	gpio_request(GPIO_FN_LCD0_DCK,		NULL);
+	gpio_request(GPIO_FN_LCD0_VSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_HSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
+	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
+
+	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT61, 1);
+
+	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
+	gpio_direction_output(GPIO_PORT202, 0);
+
+	/* Touchscreen */
+	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
+	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
+	gpio_direction_output(GPIO_PORT166, 1);
+
+	/* GETHER */
+	gpio_request(GPIO_FN_ET_CRS,		NULL);
+	gpio_request(GPIO_FN_ET_MDC,		NULL);
+	gpio_request(GPIO_FN_ET_MDIO,		NULL);
+	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
+	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
+	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
+	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
+	gpio_request(GPIO_FN_ET_COL,		NULL);
+	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
+	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
+
+	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+	gpio_direction_output(GPIO_PORT18, 1);
+
+	/* USB */
+	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
+	gpio_direction_input(GPIO_PORT159);
+
+	if (gpio_get_value(GPIO_PORT159)) {
+		/* USB Host */
+	} else {
+		/* USB Func */
+		gpio_request(GPIO_FN_VBUS, NULL);
+		platform_device_register(&usbhsf_device);
+	}
+
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHI0_CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0_CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0_D0, NULL);
+	gpio_request(GPIO_FN_SDHI0_D1, NULL);
+	gpio_request(GPIO_FN_SDHI0_D2, NULL);
+	gpio_request(GPIO_FN_SDHI0_D3, NULL);
+	gpio_request(GPIO_FN_SDHI0_WP, NULL);
+
+	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
+	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
+	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
+	gpio_direction_output(GPIO_PORT17, 0);
+	gpio_direction_output(GPIO_PORT74, 1);
+	gpio_direction_output(GPIO_PORT75, 1);
+
+	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
+
+	/*
+	 * MMCIF
+	 *
+	 * Here doesn't care SW1.4 status,
+	 * since CON2 is not mounted.
+	 */
+	gpio_request(GPIO_FN_MMC1_CLK_PORT103,	NULL);
+	gpio_request(GPIO_FN_MMC1_CMD_PORT104,	NULL);
+	gpio_request(GPIO_FN_MMC1_D0_PORT149,	NULL);
+	gpio_request(GPIO_FN_MMC1_D1_PORT148,	NULL);
+	gpio_request(GPIO_FN_MMC1_D2_PORT147,	NULL);
+	gpio_request(GPIO_FN_MMC1_D3_PORT146,	NULL);
+	gpio_request(GPIO_FN_MMC1_D4_PORT145,	NULL);
+	gpio_request(GPIO_FN_MMC1_D5_PORT144,	NULL);
+	gpio_request(GPIO_FN_MMC1_D6_PORT143,	NULL);
+	gpio_request(GPIO_FN_MMC1_D7_PORT142,	NULL);
+
+	/*
+	 * CAUTION
+	 *
+	 * DBGMD/LCDC0/FSIA MUX
+	 * DBGMD_SELECT_B should be set after setting PFC Function.
+	 */
+	gpio_request(GPIO_PORT176, NULL);
+	gpio_direction_output(GPIO_PORT176, 1);
+
+	/*
+	 * We can switch CON8/CON14 by SW1.5,
+	 * but it needs after DBGMD_SELECT_B
+	 */
+	gpio_request(GPIO_PORT6, NULL);
+	gpio_direction_input(GPIO_PORT6);
+	if (gpio_get_value(GPIO_PORT6)) {
+		/* CON14 enable */
+	} else {
+		/* CON8 (SDHI1) enable */
+		gpio_request(GPIO_FN_SDHI1_CLK,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CMD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D0,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D1,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D2,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D3,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
+
+		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
+		gpio_direction_output(GPIO_PORT16, 1);
+
+		platform_device_register(&sdhi1_device);
+	}
+
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
+	l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+
+	r8a7740_add_standard_devices();
+
+	platform_add_devices(eva_devices,
+			     ARRAY_SIZE(eva_devices));
+}
+
+static void __init eva_earlytimer_init(void)
+{
+	r8a7740_clock_init(MD_CK0 | MD_CK2);
+	shmobile_earlytimer_init();
+}
+
+static void __init eva_add_early_devices(void)
+{
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = eva_earlytimer_init;
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+	"renesas,armadillo800eva",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
+	.map_io		= r8a7740_map_io,
+	.init_early	= eva_add_early_devices,
+	.init_irq	= r8a7740_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= eva_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= eva_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 81fd95f7f52..63ab7062bee 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-void __init bonito_add_early_devices(void)
+static void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
 
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
new file mode 100644
index 00000000000..d8e33b68283
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -0,0 +1,460 @@
+/*
+ * KZM-A9-GT board support
+ *
+ * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/input.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <mach/irqs.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * external GPIO
+ */
+#define GPIO_PCF8575_BASE	(GPIO_NR)
+#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+
+/* SMSC 9221 */
+static struct resource smsc9221_resources[] = {
+	[0] = {
+		.start	= 0x10000000, /* CS4 */
+		.end	= 0x100000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x260), /* IRQ3 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9221_platdata = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+	.name		= "smsc911x",
+	.dev  = {
+		.platform_data = &smsc9221_platdata,
+	},
+	.resource	= smsc9221_resources,
+	.num_resources	= ARRAY_SIZE(smsc9221_resources),
+};
+
+/* USB external chip */
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip	= 0,
+	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
+};
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start	= 0x10010000,
+		.end	= 0x1001ffff - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x220), /* IRQ1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_resources),
+	.resource	= usb_resources,
+};
+
+/* LCDC */
+static struct fb_videomode kzm_lcdc_mode = {
+	.name		= "WVGA Panel",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 220,
+	.right_margin	= 110,
+	.hsync_len	= 70,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.lcd_modes	= &kzm_lcdc_mode,
+		.num_modes	= 1,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.panel_cfg = {
+			.width	= 152,
+			.height	= 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(141),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= gic_spi(140),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_platdata = {
+	.ocr		= MMC_VDD_165_195,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmc_device = {
+	.name		= "sh_mmcif",
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xee100000,
+		.end	= 0xee1000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= gic_spi(83),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= gic_spi(84),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
+	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
+	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
+	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
+	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
+	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
+	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+	.poll_interval	= 250, /* poling at this point */
+};
+
+static struct platform_device gpio_keys_device = {
+	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
+	.name	= "gpio-keys-polled",
+	.dev	= {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* I2C */
+static struct pcf857x_platform_data pcf8575_pdata = {
+	.gpio_base	= GPIO_PCF8575_BASE,
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = intcs_evt2irq(0x300), /* IRQ8 */
+	},
+};
+
+static struct i2c_board_info i2c3_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x20),
+		.platform_data = &pcf8575_pdata,
+	},
+};
+
+static struct platform_device *kzm_devices[] __initdata = {
+	&smsc_device,
+	&usb_host_device,
+	&lcdc_device,
+	&mmc_device,
+	&sdhi0_device,
+	&gpio_keys_device,
+};
+
+/*
+ * FIXME
+ *
+ * This is quick hack for enabling LCDC backlight
+ */
+static int __init as3711_enable_lcdc_backlight(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int i, ret;
+	__u8 magic[] = {
+		0x40, 0x2a,
+		0x43, 0x3c,
+		0x44, 0x3c,
+		0x45, 0x3c,
+		0x54, 0x03,
+		0x51, 0x00,
+		0x51, 0x01,
+		0xff, 0x00, /* wait */
+		0x43, 0xf0,
+		0x44, 0xf0,
+		0x45, 0xf0,
+	};
+
+	if (!machine_is_kzm9g())
+		return 0;
+
+	if (!a)
+		return 0;
+
+	msg.addr	= 0x40;
+	msg.len		= 2;
+	msg.flags	= 0;
+
+	for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
+		msg.buf = magic + i;
+
+		if (0xff == msg.buf[0]) {
+			udelay(500);
+			continue;
+		}
+
+		ret = i2c_transfer(a, &msg, 1);
+		if (ret < 0) {
+			pr_err("i2c transfer fail\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+device_initcall(as3711_enable_lcdc_backlight);
+
+static void __init kzm_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* enable SCIFA4 */
+	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+	/* CS4 for SMSC/USB */
+	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
+
+	/* SMSC */
+	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
+	gpio_direction_input(GPIO_PORT224);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,	NULL);
+	gpio_request(GPIO_FN_LCDD22,	NULL);
+	gpio_request(GPIO_FN_LCDD21,	NULL);
+	gpio_request(GPIO_FN_LCDD20,	NULL);
+	gpio_request(GPIO_FN_LCDD19,	NULL);
+	gpio_request(GPIO_FN_LCDD18,	NULL);
+	gpio_request(GPIO_FN_LCDD17,	NULL);
+	gpio_request(GPIO_FN_LCDD16,	NULL);
+	gpio_request(GPIO_FN_LCDD15,	NULL);
+	gpio_request(GPIO_FN_LCDD14,	NULL);
+	gpio_request(GPIO_FN_LCDD13,	NULL);
+	gpio_request(GPIO_FN_LCDD12,	NULL);
+	gpio_request(GPIO_FN_LCDD11,	NULL);
+	gpio_request(GPIO_FN_LCDD10,	NULL);
+	gpio_request(GPIO_FN_LCDD9,	NULL);
+	gpio_request(GPIO_FN_LCDD8,	NULL);
+	gpio_request(GPIO_FN_LCDD7,	NULL);
+	gpio_request(GPIO_FN_LCDD6,	NULL);
+	gpio_request(GPIO_FN_LCDD5,	NULL);
+	gpio_request(GPIO_FN_LCDD4,	NULL);
+	gpio_request(GPIO_FN_LCDD3,	NULL);
+	gpio_request(GPIO_FN_LCDD2,	NULL);
+	gpio_request(GPIO_FN_LCDD1,	NULL);
+	gpio_request(GPIO_FN_LCDD0,	NULL);
+	gpio_request(GPIO_FN_LCDDISP,	NULL);
+	gpio_request(GPIO_FN_LCDDCK,	NULL);
+
+	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
+	gpio_request(GPIO_PORT226,	NULL); /* SC */
+	gpio_direction_output(GPIO_PORT222, 1);
+	gpio_direction_output(GPIO_PORT226, 1);
+
+	/* Touchscreen */
+	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
+	gpio_direction_input(GPIO_PORT223);
+
+	/* enable MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0,		NULL);
+	gpio_request(GPIO_FN_MMCCMD0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU,	NULL);
+
+	/* enable SD */
+	gpio_request(GPIO_FN_SDHIWP0,		NULL);
+	gpio_request(GPIO_FN_SDHICD0,		NULL);
+	gpio_request(GPIO_FN_SDHICMD0,		NULL);
+	gpio_request(GPIO_FN_SDHICLK0,		NULL);
+	gpio_request(GPIO_FN_SDHID0_3,		NULL);
+	gpio_request(GPIO_FN_SDHID0_2,		NULL);
+	gpio_request(GPIO_FN_SDHID0_1,		NULL);
+	gpio_request(GPIO_FN_SDHID0_0,		NULL);
+	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
+	gpio_request(GPIO_PORT15, NULL);
+	gpio_direction_output(GPIO_PORT15, 1); /* power */
+
+	/* I2C 3 */
+	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
+	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
+	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
+
+	sh73a0_add_standard_devices();
+	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+}
+
+static const char *kzm9g_boards_compat_dt[] __initdata = {
+	"renesas,kzm9g",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9G_DT, "kzm9g")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= kzm_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= kzm9g_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 8c6202bb6ae..aae2e24fde4 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -908,6 +908,8 @@ fsi_set_rate_end:
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
 		.flags = SH_FSI_BRS_INV,
+		.tx_id = SHDMA_SLAVE_FSIA_TX,
+		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
 		.flags = SH_FSI_BRS_INV	|
@@ -920,9 +922,11 @@ static struct sh_fsi_platform_info fsi_info = {
 
 static struct resource fsi_resources[] = {
 	[0] = {
+		/* we need 0xFE1F0000 to access DMA
+		 * instead of 0xFE3C0000 */
 		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
+		.start  = 0xFE1F0000,
+		.end    = 0xFE1F0400 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1248,6 +1252,8 @@ static void mackerel_camera_del(struct soc_camera_device *icd)
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 };
 
 static struct resource ceu_resources[] = {
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 81b54a6af20..26eea5f2105 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -352,6 +352,7 @@ enum {
 
 	MSTP329, MSTP328, MSTP323, MSTP320,
 	MSTP314, MSTP313, MSTP312,
+	MSTP309,
 
 	MSTP416, MSTP415, MSTP407, MSTP406,
 
@@ -382,6 +383,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
+	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
 
 	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
 	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
@@ -447,6 +449,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
 	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
+	CLKDEV_DEV_ID("sh-eth",			&mstp_clks[MSTP309]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 9b3598e4f10..398e2c10913 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -482,6 +482,9 @@ enum {
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
+
+	/* end of GPIO */
+	GPIO_NR,
 };
 
 /* DMA slave IDs */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index e05634ce2e0..4a547b80326 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
 	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
 	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
 	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
 	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
 	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 7006cdc8b8c..bacdd667e3b 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -22,7 +22,8 @@
 #include <mach/common.h>
 #include <mach/emev2.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
+			of_machine_is_compatible("renesas,sh73a0"))
 #define is_r8a7779() machine_is_marzen()
 #define is_emev2() of_machine_is_compatible("renesas,emev2")
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 34a1548dbda..ec4eb49c169 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -60,6 +61,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 void __init r8a7740_map_io(void)
 {
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+
+	/*
+	 * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
+	 * enough to allocate the frame buffer memory.
+	 */
+	init_consistent_dma_size(12 << 20);
 }
 
 /* SCIFA0 */