Merge tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:

Renesas ARM based SoC boot cleanup for v3.11

Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.

As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.

* tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove Bonito board support
  ARM: shmobile: Remove AP4EVB board support
  ARM: shmobile: Remove mach/memory.h
  ARM: shmobile: Remove MEMORY_START/SIZE
  ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
  ARM: shmobile: Remove old SCU boot code
  ARM: shmobile: EMEV2 SMP with SCU boot fn and args
  ARM: shmobile: sh73a0 SMP with SCU boot fn and args
  ARM: shmobile: r8a7779 SMP with SCU boot fn and args
  ARM: shmobile: Add SCU boot function using argument
  ARM: shmobile: Add SMP boot function and argument
  ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
  ARM: shmobile: Remove romImage CONFIG_MEMORY_START
  ARM: shmobile: Let romImage rely on default ATAGS
  ARM: shmobile: uImage load address rework

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

19 files changed, 65 insertions, 2040 deletions

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 757c4e97375..65e1547678b 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -71,27 +71,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_AP4EVB
-	bool "AP4EVB board"
-	depends on ARCH_SH7372
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SH_LCD_MIPI_DSI
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-
-choice
-	prompt "AP4EVB LCD panel selection"
-	default AP4EVB_QHD
-	depends on MACH_AP4EVB
-
-config AP4EVB_QHD
-	bool "MIPI-DSI QHD (960x540)"
-
-config AP4EVB_WVGA
-	bool "Parallel WVGA (800x480)"
-
-endchoice
-
 config MACH_AG5EVM
 	bool "AG5EVM board"
 	depends on ARCH_SH73A0
@@ -118,12 +97,6 @@ config MACH_KOTA2
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-config MACH_BONITO
-	bool "bonito board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
@@ -199,37 +172,6 @@ config CPU_HAS_INTEVT
         bool
 	default y
 
-menu "Memory configuration"
-
-config MEMORY_START
-	hex "Physical memory start address"
-	default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO || \
-				MACH_ARMADILLO800EVA || MACH_APE6EVM || \
-				MACH_LAGER
-	default "0x41000000" if MACH_KOTA2
-	default "0x00000000"
-	---help---
-	  Tweak this only when porting to a new machine which does not
-	  already have a defconfig. Changing it from the known correct
-	  value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
-	hex "Physical memory size"
-	default "0x80000000" if MACH_LAGER
-	default "0x40000000" if MACH_APE6EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
-				MACH_ARMADILLO800EVA
-	default "0x1e000000" if MACH_KOTA2
-	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
-	default "0x04000000"
-	help
-	  This sets the default memory size assumed by your kernel. It can
-	  be overridden as normal by the 'mem=' argument on the kernel command
-	  line.
-
-endmenu
-
 menu "Timer and clock configuration"
 
 config SHMOBILE_TIMER_HZ
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 068f1dadc46..76f1639c594 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,12 +35,10 @@ obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 
 # Board objects
-obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
-obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 498efd99338..84c6868580f 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,20 @@
-__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+# per-board load address for uImage
+loadaddr-y	:=
+loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
+loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
+loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
+loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
+loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
+loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
+loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
+loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
+loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
+loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
 
+__ZRELADDR	:= $(sort $(loadaddr-y))
    zreladdr-y   += $(__ZRELADDR)
 
 # Unsupported legacy stuff
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
deleted file mode 100644
index 297bf5eec5a..00000000000
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ /dev/null
@@ -1,1310 +0,0 @@
-/*
- * AP4EVB board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/pm_clock.h>
-#include <linux/dma-mapping.h>
-
-#include <media/sh_mobile_ceu.h>
-#include <media/sh_mobile_csi2.h>
-#include <media/soc_camera.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include "sh-gpio.h"
-
-/*
- * Address	Interface		BusWidth	note
- * ------------------------------------------------------------------
- * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
- * 0x0800_0000	user area		-
- * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
- * 0x1400_0000	Ether (LAN9220)		16bit
- * 0x1600_0000	user area		-		cannot use with NAND
- * 0x1800_0000	user area		-
- * 0x1A00_0000	-
- * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
- */
-
-/*
- * NOR Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NOR Flash ROM
- *  bit1 | bit1  bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    Area 0
- *  OFF  | ON     OFF | OFF  |    Area 4
- */
-
-/*
- * NAND Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NAND Flash ROM
- *  bit1 | bit1  bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    FCE 0
- *  OFF  | ON     OFF | OFF  |    FCE 1
- */
-
-/*
- * SMSC 9220
- *
- *  SW1		SMSC 9220
- * -----------------------
- *  ON		access disable
- *  OFF		access enable
- */
-
-/*
- * LCD / IRQ / KEYSC / IrDA
- *
- * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
- * LCD = 2nd LCDC (WVGA)
- *
- * 		|		SW43			|
- * SW3		|	ON		|	OFF	|
- * -------------+-----------------------+---------------+
- * ON		| KEY / IrDA		| LCD		|
- * OFF		| KEY / IrDA / IRQ	| IRQ		|
- *
- *
- * QHD / WVGA display
- *
- * You can choice display type on menuconfig.
- * Then, check above dip-switch.
- */
-
-/*
- * USB
- *
- * J7 : 1-2  MAX3355E VBUS
- *      2-3  DC 5.0V
- *
- * S39: bit2: off
- */
-
-/*
- * FSI/FSMI
- *
- * SW41	:  ON : SH-Mobile AP4 Audio Mode
- *	: OFF : Bluetooth Audio Mode
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone Enable" on
- */
-
-/*
- * MMC0/SDHI1 (CN7)
- *
- * J22 : select card voltage
- *       1-2 pin : 1.8v
- *       2-3 pin : 3.3v
- *
- *        SW1  |             SW33
- *             | bit1 | bit2 | bit3 | bit4
- * ------------+------+------+------+-------
- * MMC0   OFF  |  OFF |  ON  |  ON  |  X
- * SDHI1  OFF  |  ON  |   X  |  OFF | ON
- *
- * voltage lebel
- * CN7 : 1.8v
- * CN12: 3.3v
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	/* J22 default position: 1.8V */
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* SMSC 9220 */
-static struct resource smc911x_resources[] = {
-	{
-		.start	= 0x14000000,
-		.end	= 0x16000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x02c0) /* IRQ6A */,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(smc911x_resources),
-	.resource       = smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/*
- * The card detect pin of the top SD/MMC slot (CN7) is active low and is
- * connected to GPIO A22 of SH7372 (GPIO 41).
- */
-static int slot_cn7_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(41);
-}
-/* MERAM */
-static struct sh_mobile_meram_info meram_info = {
-	.addr_mode      = SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
-	[0] = {
-		.name	= "regs",
-		.start	= 0xe8000000,
-		.end	= 0xe807ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "meram",
-		.start	= 0xe8080000,
-		.end	= 0xe81fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device meram_device = {
-	.name           = "sh_mobile_meram",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(meram_resources),
-	.resource       = meram_resources,
-	.dev            = {
-		.platform_data = &meram_info,
-	},
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xE6BD0000,
-		.end	= 0xE6BD00FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1ac0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1ae0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn7_get_cd,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6850000,
-		.end    = 0xe68500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_ocr_mask	= MMC_VDD_165_195,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ,
-	.get_cd		= slot_cn7_get_cd,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6860000,
-		.end    = 0xe68600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-/* USB1 */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008));
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xE68B0000,
-		.end	= 0xE68B00E6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/*
- * QHD display
- */
-#ifdef CONFIG_AP4EVB_QHD
-
-/* KEYSC (Needs SW43 set to ON) */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_1,
-	.scan_timing	= 3,
-	.delay		= 2500,
-	.keycodes = {
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b0063,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* "keysc0" clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* MIPI-DSI */
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
-
-	if (IS_ERR(pck))
-		return PTR_ERR(pck);
-
-	if (enable) {
-		/*
-		 * DSIPCLK	= 24MHz
-		 * D-PHY	= DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
-		 * HsByteCLK	= D-PHY/8 = 39MHz
-		 *
-		 *  X * Y * FPS =
-		 * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
-		 */
-		clk_set_rate(pck, clk_round_rate(pck, 24000000));
-		clk_enable(pck);
-	} else {
-		clk_disable(pck);
-	}
-
-	clk_put(pck);
-
-	return 0;
-}
-
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.start  = 0xffc60000,
-		.end    = 0xffc63073,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 0xffc68000,
-		.end    = 0xffc680ef,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.channel	= LCDC_CHAN_MAINLCD,
-	.lane		= 2,
-	.vsynw_offset	= 17,
-	.phyctrl	= 0x6 << 8,
-	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-static struct platform_device *qhd_devices[] __initdata = {
-	&mipidsi0_device,
-	&keysc_device,
-};
-#endif /* CONFIG_AP4EVB_QHD */
-
-/* LCDC0 */
-static const struct fb_videomode ap4evb_lcdc_modes[] = {
-	{
-#ifdef CONFIG_AP4EVB_QHD
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-#else
-		.name		= "WVGA Panel",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 220,
-		.right_margin	= 110,
-		.hsync_len	= 70,
-		.upper_margin	= 20,
-		.lower_margin	= 5,
-		.vsync_len	= 5,
-		.sync		= 0,
-#endif
-	},
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x40,
-	},
-	.icb[1] = {
-		.meram_size     = 0x40,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = ap4evb_lcdc_modes,
-		.num_modes = ARRAY_SIZE(ap4evb_lcdc_modes),
-		.meram_cfg = &lcd_meram_cfg,
-#ifdef CONFIG_AP4EVB_QHD
-		.tx_dev = &mipidsi0_device,
-#endif
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* FSI */
-#define IRQ_FSI		evt2irq(0x1840)
-static struct sh_fsi_platform_info fsi_info = {
-	.port_b = {
-		.flags		= SH_FSI_CLK_CPG |
-				  SH_FSI_FMT_SPDIF,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_FSI,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4643_info = {
-	.name		= "AK4643",
-	.card		= "FSI2A-AK4643",
-	.codec		= "ak4642-codec.0-0013",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4643_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4643_info,
-	},
-};
-
-/* LCDC1 */
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq);
-
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags = HDMI_SND_SRC_SPDIF,
-	.clk_optimize_parent = ap4evb_clk_optimize,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
-		.start	= evt2irq(0x17e0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	long error;
-
-	if (IS_ERR(hdmi_ick)) {
-		int ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		return ret;
-	}
-
-	error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64);
-
-	clk_put(hdmi_ick);
-
-	return error;
-}
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x100,
-	},
-	.icb[1] = {
-		.meram_size     = 0x100,
-	},
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
-	.clock_source = LCDC_CLK_EXTERNAL,
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.meram_cfg = &hdmi_meram_cfg,
-		.tx_dev = &hdmi_device,
-	}
-};
-
-static struct resource lcdc1_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe947fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x1780),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc1_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc1_resources),
-	.resource	= lcdc1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sh_mobile_lcdc1_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.cpu_dai = {
-		.name	= "fsib-dai",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
-	},
-	.codec_dai = {
-		.name	= "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-	},
-};
-
-static struct gpio_led ap4evb_leds[] = {
-	{
-		.name			= "led4",
-		.gpio			= 185,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led2",
-		.gpio			= 186,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led3",
-		.gpio			= 187,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led1",
-		.gpio			= 188,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data ap4evb_leds_pdata = {
-	.num_leds = ARRAY_SIZE(ap4evb_leds),
-	.leds = ap4evb_leds,
-};
-
-static struct platform_device leds_device = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data  = &ap4evb_leds_pdata,
-	},
-};
-
-static struct i2c_board_info imx074_info = {
-	I2C_BOARD_INFO("imx074", 0x1a),
-};
-
-static struct soc_camera_link imx074_link = {
-	.bus_id		= 0,
-	.board_info	= &imx074_info,
-	.i2c_adapter_id	= 0,
-	.module_name	= "imx074",
-};
-
-static struct platform_device ap4evb_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &imx074_link,
-	},
-};
-
-static struct sh_csi2_client_config csi2_clients[] = {
-	{
-		.phy		= SH_CSI2_PHY_MAIN,
-		.lanes		= 0,		/* default: 2 lanes */
-		.channel	= 0,
-		.pdev		= &ap4evb_camera,
-	},
-};
-
-static struct sh_csi2_pdata csi2_info = {
-	.type		= SH_CSI2C,
-	.clients	= csi2_clients,
-	.num_clients	= ARRAY_SIZE(csi2_clients),
-	.flags		= SH_CSI2_ECC | SH_CSI2_CRC,
-};
-
-static struct resource csi2_resources[] = {
-	[0] = {
-		.name	= "CSI2",
-		.start	= 0xffc90000,
-		.end	= 0xffc90fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x17a0),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mobile_ceu_companion csi2 = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csi2_resources),
-	.resource	= csi2_resources,
-	.platform_data	= &csi2_info,
-};
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
-	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.max_width = 8188,
-	.max_height = 8188,
-	.csi2 = &csi2,
-};
-
-static struct resource ceu_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x880),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu_device = {
-	.name		= "sh_mobile_ceu",
-	.id             = 0, /* "ceu0" clock */
-	.num_resources	= ARRAY_SIZE(ceu_resources),
-	.resource	= ceu_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *ap4evb_devices[] __initdata = {
-	&leds_device,
-	&nor_flash_device,
-	&smc911x_device,
-	&sdhi0_device,
-	&sdhi1_device,
-	&usb1_host_device,
-	&fsi_device,
-	&fsi_ak4643_device,
-	&fsi_hdmi_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&lcdc_device,
-	&lcdc1_device,
-	&ceu_device,
-	&ap4evb_camera,
-	&meram_device,
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	int ret;
-	long rate;
-
-	if (IS_ERR(hdmi_ick)) {
-		ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
-	if (ret < 0) {
-		pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
-		goto out;
-	}
-
-	pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
-
-	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
-	if (rate < 0) {
-		pr_err("Cannot get suitable rate: %ld\n", rate);
-		ret = rate;
-		goto out;
-	}
-
-	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
-	if (ret < 0) {
-		pr_err("Cannot set rate %ld: %d\n", rate, ret);
-		goto out;
-	}
-
-	pr_debug("PLLC2 set frequency %lu\n", rate);
-
-	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0)
-		pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
-	if (!IS_ERR(hdmi_ick))
-		clk_put(hdmi_ick);
-}
-
-/* TouchScreen */
-#ifdef CONFIG_AP4EVB_QHD
-# define GPIO_TSC_PORT	123
-#else /* WVGA */
-# define GPIO_TSC_PORT	40
-#endif
-
-#define IRQ28	evt2irq(0x3380) /* IRQ28A */
-#define IRQ7	evt2irq(0x02e0) /* IRQ7A */
-static int ts_get_pendown_state(void)
-{
-	return !gpio_get_value(GPIO_TSC_PORT);
-}
-
-static int ts_init(void)
-{
-	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
-
-	return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-	.get_pendown_state	= ts_get_pendown_state,
-	.init_platform_hw	= ts_init,
-};
-
-static struct i2c_board_info tsc_device = {
-	I2C_BOARD_INFO("tsc2007", 0x48),
-	.type		= "tsc2007",
-	.platform_data	= &tsc2007_info,
-	/*.irq is selected on ap4evb_init */
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4643", 0x13),
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-};
-
-
-static const struct pinctrl_map ap4evb_pinctrl_map[] = {
-	/* CEU */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
-				  "ceu_clk_0", "ceu"),
-	/* FSIA (AK4643) */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
-				  "fsia_data_out", "fsia"),
-	/* FSIB (HDMI) */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
-				  "fsib_mclk_in", "fsib"),
-	/* HDMI */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
-				  "hdmi", "hdmi"),
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
-				  "keysc_in04_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
-				  "keysc_out5", "keysc"),
-#ifndef CONFIG_AP4EVB_QHD
-	/* LCDC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
-				  "lcd_data18", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
-				  "lcd_sync", "lcd"),
-#endif
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
-				  "mmc0_ctrl_0", "mmc0"),
-	/* SCIFA0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
-				  "scifa0_data", "scifa0"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
-				  "sdhi1_ctrl", "sdhi1"),
-	/* SMSC911X */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
-				  "bsc_cs5a", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
-				  "intc_irq6_0", "intc"),
-	/* TSC2007 */
-#ifdef CONFIG_AP4EVB_QHD
-	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
-				  "intc_irq28_0", "intc"),
-#else /* WVGA */
-	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
-				  "intc_irq7_0", "intc"),
-#endif
-	/* USBHS1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
-				  "usb1_vbus", "usb1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
-				  "usb1_otg_id_0", "usb1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
-				  "usb1_otg_ctrl_0", "usb1"),
-};
-
-#define GPIO_PORT9CR	IOMEM(0xE6051009)
-#define GPIO_PORT10CR	IOMEM(0xE605100A)
-#define USCCR1		IOMEM(0xE6058144)
-static void __init ap4evb_init(void)
-{
-	struct pm_domain_device domain_devices[] = {
-		{ "A4LC", &lcdc1_device, },
-		{ "A4LC", &lcdc_device, },
-		{ "A4MP", &fsi_device, },
-		{ "A3SP", &sh_mmcif_device, },
-		{ "A3SP", &sdhi0_device, },
-		{ "A3SP", &sdhi1_device, },
-		{ "A4R", &ceu_device, },
-	};
-	u32 srcr4;
-	struct clk *clk;
-
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
-	pinctrl_register_mappings(ap4evb_pinctrl_map,
-				  ARRAY_SIZE(ap4evb_pinctrl_map));
-	sh7372_pinmux_init();
-
-	/* enable Debug switch (S6) */
-	gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
-	gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x8a0a, IOMEM(0xE6058130));	/* USBCR4 */
-
-	/* FSI2 port A (ak4643) */
-	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
-
-	gpio_request(9, NULL);
-	gpio_request(10, NULL);
-	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
-	/* card detect pin for MMC slot (CN7) */
-	gpio_request_one(41, GPIOF_IN, NULL);
-
-	/* FSI2 port B (HDMI) */
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
-	/* set SPU2 clock to 119.6 MHz */
-	clk = clk_get(NULL, "spu_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 119600000));
-		clk_put(clk);
-	}
-
-	/*
-	 * set irq priority, to avoid sound chopping
-	 * when NFS rootfs is used
-	 *  FSI(3) > SMSC911X(2)
-	 */
-	intc_set_priority(IRQ_FSI, 3);
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
-
-#ifdef CONFIG_AP4EVB_QHD
-
-	/*
-	 * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
-	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
-	 */
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ28;
-	i2c_register_board_info(1, &tsc_device, 1);
-
-	/* LCDC0 */
-	lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
-	lcdc_info.ch[0].interface_type		= RGB24;
-	lcdc_info.ch[0].clock_divider		= 1;
-	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
-	lcdc_info.ch[0].panel_cfg.width		= 44;
-	lcdc_info.ch[0].panel_cfg.height	= 79;
-
-	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
-
-#else
-	/*
-	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
-	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
-	 */
-	gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
-	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
-	lcdc_info.clock_source			= LCDC_CLK_BUS;
-	lcdc_info.ch[0].interface_type		= RGB18;
-	lcdc_info.ch[0].clock_divider		= 3;
-	lcdc_info.ch[0].flags			= 0;
-	lcdc_info.ch[0].panel_cfg.width		= 152;
-	lcdc_info.ch[0].panel_cfg.height	= 91;
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ7;
-	i2c_register_board_info(0, &tsc_device, 1);
-#endif /* CONFIG_AP4EVB_QHD */
-
-	/* CEU */
-
-	/*
-	 * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
-	 * becomes available
-	 */
-
-	/* MIPI-CSI stuff */
-	clk = clk_get(NULL, "vck1_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 13000000));
-		clk_enable(clk);
-		clk_put(clk);
-	}
-
-	sh7372_add_standard_devices();
-
-	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-#define SRCR4 IOMEM(0xe61580bc)
-	srcr4 = __raw_readl(SRCR4);
-	__raw_writel(srcr4 | (1 << 13), SRCR4);
-	udelay(50);
-	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
-	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-
-	hdmi_init_pm_clock();
-	sh7372_pm_init();
-	pm_clk_add(&fsi_device.dev, "spu2");
-	pm_clk_add(&lcdc1_device.dev, "hdmi");
-}
-
-MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= ap4evb_init,
-	.init_late	= sh7372_pm_init_late,
-	.init_time	= sh7372_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
deleted file mode 100644
index b373e9ced57..00000000000
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * bonito board support
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/r8a7740.h>
-#include <mach/irqs.h>
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * CS	Address		device			note
- *----------------------------------------------------------------
- * 0	0x0000_0000	NOR Flash (64MB)	SW12 : bit3 = OFF
- * 2	0x0800_0000	ExtNOR (64MB)		SW12 : bit3 = OFF
- * 4			-
- * 5A			-
- * 5B	0x1600_0000	SRAM (8MB)
- * 6	0x1800_0000	FPGA (64K)
- *	0x1801_0000	Ether (4KB)
- *	0x1801_1000	USB (4KB)
- */
-
-/*
- * SW12
- *
- *	bit1			bit2			bit3
- *----------------------------------------------------------------------------
- * ON	NOR WriteProtect	NAND WriteProtect	CS0 ExtNOR / CS2 NOR
- * OFF	NOR Not WriteProtect	NAND Not WriteProtect	CS0 NOR    / CS2 ExtNOR
- */
-
-/*
- * SCIFA5 (CN42)
- *
- * S38.3 = ON
- * S39.6 = ON
- * S43.1 = ON
- */
-
-/*
- * LCDC0 (CN3/CN4/CN7)
- *
- * S38.1 = OFF
- * S38.2 = OFF
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/*
- * FPGA
- */
-#define IRQSR0		0x0020
-#define IRQSR1		0x0022
-#define IRQMR0		0x0030
-#define IRQMR1		0x0032
-#define BUSSWMR1	0x0070
-#define BUSSWMR2	0x0072
-#define BUSSWMR3	0x0074
-#define BUSSWMR4	0x0076
-
-#define LCDCR		0x10B4
-#define DEVRSTCR1	0x10D0
-#define DEVRSTCR2	0x10D2
-#define A1MDSR		0x10E0
-#define BVERR		0x1100
-
-/* FPGA IRQ */
-#define FPGA_IRQ_BASE		(512)
-#define FPGA_IRQ0		(FPGA_IRQ_BASE)
-#define FPGA_IRQ1		(FPGA_IRQ_BASE + 16)
-#define FPGA_ETH_IRQ		(FPGA_IRQ0 + 15)
-static u16 bonito_fpga_read(u32 offset)
-{
-	return __raw_readw(IOMEM(0xf0003000) + offset);
-}
-
-static void bonito_fpga_write(u32 offset, u16 val)
-{
-	__raw_writew(val, IOMEM(0xf0003000) + offset);
-}
-
-static void bonito_fpga_irq_disable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift));
-}
-
-static void bonito_fpga_irq_enable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift));
-}
-
-static struct irq_chip bonito_fpga_irq_chip __read_mostly = {
-	.name		= "bonito FPGA",
-	.irq_mask	= bonito_fpga_irq_disable,
-	.irq_unmask	= bonito_fpga_irq_enable,
-};
-
-static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	u32 val =  bonito_fpga_read(IRQSR1) << 16 |
-		   bonito_fpga_read(IRQSR0);
-	u32 mask = bonito_fpga_read(IRQMR1) << 16 |
-		   bonito_fpga_read(IRQMR0);
-
-	int i;
-
-	val &= ~mask;
-
-	for (i = 0; i < 32; i++) {
-		if (!(val & (1 << i)))
-			continue;
-
-		generic_handle_irq(FPGA_IRQ_BASE + i);
-	}
-}
-
-static void bonito_fpga_init(void)
-{
-	int i;
-
-	bonito_fpga_write(IRQMR0, 0xffff); /* mask all */
-	bonito_fpga_write(IRQMR1, 0xffff); /* mask all */
-
-	/* Device reset */
-	bonito_fpga_write(DEVRSTCR1,
-		   (1 << 2));	/* Eth */
-
-	/* FPGA irq require special handling */
-	for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) {
-		irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_flags(i, IRQF_VALID); /* yuck */
-	}
-
-	irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
-	irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
-* PMIC settings
-*
-* FIXME
-*
-* bonito board needs some settings by pmic which use i2c access.
-* pmic settings use device_initcall() here for use it.
-*/
-static __u8 *pmic_settings = NULL;
-static __u8 pmic_do_2A[] = {
-	0x1C, 0x09,
-	0x1A, 0x80,
-	0xff, 0xff,
-};
-
-static int __init pmic_init(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	__u8 buf[2];
-	int i, ret;
-
-	if (!pmic_settings)
-		return 0;
-	if (!a)
-		return 0;
-
-	msg.addr	= 0x46;
-	msg.buf		= buf;
-	msg.len		= 2;
-	msg.flags	= 0;
-
-	for (i = 0; ; i += 2) {
-		buf[0] = pmic_settings[i + 0];
-		buf[1] = pmic_settings[i + 1];
-
-		if ((0xff == buf[0]) && (0xff == buf[1]))
-			break;
-
-		ret = i2c_transfer(a, &msg, 1);
-		if (ret < 0) {
-			pr_err("i2c transfer fail\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-device_initcall(pmic_init);
-
-/*
- * LCDC0
- */
-static const struct fb_videomode lcdc0_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 5,
-		.flags			= 0,
-		.lcd_modes		= &lcdc0_mode,
-		.num_modes		= 1,
-		.panel_cfg = {
-			.width	= 152,
-			.height = 91,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x0580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.id		= 0,
-	.resource	= lcdc0_resources,
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static const struct pinctrl_map lcdc0_pinctrl_map[] = {
-	/* LCD0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_data24_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_lclk_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_sync", "lcd0"),
-};
-
-/*
- * SMSC 9221
- */
-static struct resource smsc_resources[] = {
-	[0] = {
-		.start		= 0x18010000,
-		.end		= 0x18011000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= FPGA_ETH_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc_platdata = {
-	.flags		= SMSC911X_USE_16BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc_platdata,
-	},
-	.resource	= smsc_resources,
-	.num_resources	= ARRAY_SIZE(smsc_resources),
-};
-
-/*
- * base board devices
- */
-static struct platform_device *bonito_base_devices[] __initdata = {
-	&lcdc0_device,
-	&smsc_device,
-};
-
-/*
- * map I/O
- */
-static struct map_desc bonito_io_desc[] __initdata = {
-	/*
-	 * for FPGA (0x1800000-0x19ffffff)
-	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
-	 */
-	{
-		.virtual	= 0xf0003000,
-		.pfn		= __phys_to_pfn(0x18000000),
-		.length		= PAGE_SIZE * 2,
-		.type		= MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init bonito_map_io(void)
-{
-	r8a7740_map_io();
-	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-}
-
-/*
- * board init
- */
-#define BIT_ON(sw, bit)		(sw & (1 << bit))
-#define BIT_OFF(sw, bit)	(!(sw & (1 << bit)))
-
-#define VCCQ1CR		IOMEM(0xE6058140)
-#define VCCQ1LCDCR	IOMEM(0xE6058186)
-
-/*
- * HACK: The FPGA mappings should be associated with the FPGA device, but we
- * don't have one at the moment. Associate them with the PFC device to make
- * sure they will be applied.
- */
-static const struct pinctrl_map fpga_pinctrl_map[] = {
-	/* FPGA */
-	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
-				  "bsc_cs5a_0", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
-				  "bsc_cs5b", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
-				  "bsc_cs6a", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
-				  "intc_irq10", "intc"),
-};
-
-static const struct pinctrl_map scifa5_pinctrl_map[] = {
-	/* SCIFA5 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.5", "pfc-r8a7740",
-				  "scifa5_data_2", "scifa5"),
-};
-
-static void __init bonito_init(void)
-{
-	u16 val;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(fpga_pinctrl_map,
-				  ARRAY_SIZE(fpga_pinctrl_map));
-	r8a7740_pinmux_init();
-	bonito_fpga_init();
-
-	pmic_settings = pmic_do_2A;
-
-	/*
-	 * core board settings
-	 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
-#endif
-
-	r8a7740_add_standard_devices();
-
-	/*
-	 * base board settings
-	 */
-	gpio_request_one(176, GPIOF_IN, NULL);
-	if (!gpio_get_value(176)) {
-		u16 bsw2;
-		u16 bsw3;
-		u16 bsw4;
-
-		val = bonito_fpga_read(BVERR);
-		pr_info("bonito version: cpu %02x, base %02x\n",
-			((val >> 8) & 0xFF),
-			((val >> 0) & 0xFF));
-
-		bsw2 = bonito_fpga_read(BUSSWMR2);
-		bsw3 = bonito_fpga_read(BUSSWMR3);
-		bsw4 = bonito_fpga_read(BUSSWMR4);
-
-		/*
-		 * SCIFA5 (CN42)
-		 */
-		if (BIT_OFF(bsw2, 1) &&	/* S38.3 = ON */
-		    BIT_OFF(bsw3, 9) &&	/* S39.6 = ON */
-		    BIT_OFF(bsw4, 4)) {	/* S43.1 = ON */
-			pinctrl_register_mappings(scifa5_pinctrl_map,
-						  ARRAY_SIZE(scifa5_pinctrl_map));
-		}
-
-		/*
-		 * LCDC0 (CN3)
-		 */
-		if (BIT_ON(bsw2, 3) &&	/* S38.1 = OFF */
-		    BIT_ON(bsw2, 2)) {	/* S38.2 = OFF */
-			pinctrl_register_mappings(lcdc0_pinctrl_map,
-						  ARRAY_SIZE(lcdc0_pinctrl_map));
-
-			gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
-					 NULL); /* LCDDON */
-
-			/* backlight on */
-			bonito_fpga_write(LCDCR, 1);
-
-			/*  drivability Max */
-			__raw_writew(0x00FF , VCCQ1LCDCR);
-			__raw_writew(0xFFFF , VCCQ1CR);
-		}
-
-		platform_add_devices(bonito_base_devices,
-				     ARRAY_SIZE(bonito_base_devices));
-	}
-}
-
-static void __init bonito_earlytimer_init(void)
-{
-	u16 val;
-	u8 md_ck = 0;
-
-	/* read MD_CK value */
-	val = bonito_fpga_read(A1MDSR);
-	if (val & (1 << 10))
-		md_ck |= MD_CK2;
-	if (val & (1 << 9))
-		md_ck |= MD_CK1;
-	if (val & (1 << 8))
-		md_ck |= MD_CK0;
-
-	r8a7740_clock_init(md_ck);
-	shmobile_earlytimer_init();
-}
-
-static void __init bonito_add_early_devices(void)
-{
-	r8a7740_add_early_devices();
-}
-
-MACHINE_START(BONITO, "bonito")
-	.map_io		= bonito_map_io,
-	.init_early	= bonito_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= bonito_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= bonito_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index 7d113f898e7..6f986546725 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -25,31 +25,24 @@
 
 	__CPUINIT
 /*
- * Reset vector for secondary CPUs.
+ * Boot code for secondary CPUs.
  *
  * First we turn on L1 cache coherency for our CPU. Then we jump to
  * shmobile_invalidate_start that invalidates the cache and hands over control
  * to the common ARM startup code.
- * This function will be mapped to address 0 by the SBAR register.
- * A normal branch is out of range here so we need a long jump. We jump to
- * the physical address as the MMU is still turned off.
  */
-	.align	12
-ENTRY(shmobile_secondary_vector_scu)
-	mrc     p15, 0, r0, c0, c0, 5	@ read MIPDR
-	and	r0, r0, #3		@ mask out cpu ID
-	lsl	r0, r0, #3		@ we will shift by cpu_id * 8 bits
-	ldr	r1, 2f
-	ldr	r1, [r1]		@ SCU base address
-	ldr	r2, [r1, #8]		@ SCU Power Status Register
+ENTRY(shmobile_boot_scu)
+					@ r0 = SCU base address
+	mrc     p15, 0, r1, c0, c0, 5	@ read MIPDR
+	and	r1, r1, #3		@ mask out cpu ID
+	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
+	ldr	r2, [r0, #8]		@ SCU Power Status Register
 	mov	r3, #3
-	bic	r2, r2, r3, lsl r0	@ Clear bits of our CPU (Run Mode)
-	str	r2, [r1, #8]		@ write back
+	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	str	r2, [r0, #8]		@ write back
 
-	ldr	pc, 1f
-1:	.long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-2:	.long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector_scu)
+	b	shmobile_invalidate_start
+ENDPROC(shmobile_boot_scu)
 
 	.text
 	.globl	shmobile_scu_base
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 96001fd49b6..559d1ce5f57 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -27,7 +27,14 @@ ENDPROC(shmobile_invalidate_start)
  * We need _long_ jump to the physical address.
  */
 	.align  12
-ENTRY(shmobile_secondary_vector)
+ENTRY(shmobile_boot_vector)
+	ldr     r0, 2f
 	ldr     pc, 1f
-1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector)
+ENDPROC(shmobile_boot_vector)
+
+	.globl	shmobile_boot_fn
+shmobile_boot_fn:
+1:	.space	4
+	.globl	shmobile_boot_arg
+shmobile_boot_arg:
+2:	.space	4
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 4634a5d4b63..e818f029d8e 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -7,8 +7,10 @@ extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
-extern void shmobile_secondary_vector(void);
-extern void shmobile_secondary_vector_scu(void);
+extern void shmobile_boot_vector(void);
+extern unsigned long shmobile_boot_fn;
+extern unsigned long shmobile_boot_arg;
+extern void shmobile_boot_scu(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
deleted file mode 100644
index 9f134dfeffd..00000000000
--- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
deleted file mode 100644
index 0ffbe8155c7..00000000000
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(CONFIG_MEMORY_START)
-#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
deleted file mode 100644
index db59fdbda86..00000000000
--- a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef MMC_AP4EB_H
-#define MMC_AP4EB_H
-
-#define PORT185CR      (void __iomem *)0xe60520b9
-#define PORT186CR      (void __iomem *)0xe60520ba
-#define PORT187CR      (void __iomem *)0xe60520bb
-#define PORT188CR      (void __iomem *)0xe60520bc
-
-#define PORTR191_160DR (void __iomem *)0xe6056014
-
-static inline void mmc_init_progress(void)
-{
-       /* Initialise LEDS1-4
-        * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
-        * value:     0x10 - enable output
-        */
-       __raw_writeb(0x10, PORT185CR);
-       __raw_writeb(0x10, PORT186CR);
-       __raw_writeb(0x10, PORT187CR);
-       __raw_writeb(0x10, PORT188CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
-	__raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
-		     (1 << (25 + n)), PORTR191_160DR);
-}
-
-#endif /* MMC_AP4EB_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h
index 21a59db638b..e979b8fc1da 100644
--- a/arch/arm/mach-shmobile/include/mach/mmc.h
+++ b/arch/arm/mach-shmobile/include/mach/mmc.h
@@ -7,9 +7,7 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_AP4EVB
-#include "mach/mmc-ap4eb.h"
-#elif defined(CONFIG_MACH_MACKEREL)
+#ifdef CONFIG_MACH_MACKEREL
 #include "mach/mmc-mackerel.h"
 #else
 #error "unsupported board."
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index e882717ca97..854a9f0ca04 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -75,6 +75,8 @@ extern void sh7372_intcs_resume(void);
 extern void sh7372_intca_suspend(void);
 extern void sh7372_intca_resume(void);
 
+extern unsigned long sh7372_cpu_resume;
+
 #ifdef CONFIG_PM
 extern void __init sh7372_init_pm_domains(void);
 #else
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 9320aff0a20..f2d8744c1f1 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -10,11 +10,9 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_AP4EVB
-#define MACH_TYPE	MACH_TYPE_AP4EVB
-#include "mach/head-ap4evb.txt"
-#elif defined(CONFIG_MACH_MACKEREL)
+#ifdef CONFIG_MACH_MACKEREL
 #define MACH_TYPE	MACH_TYPE_MACKEREL
+#define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
 #else
 #error "unsupported board."
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index dec9293bb90..0de75fd394b 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -351,6 +351,9 @@ static void sh7372_enter_a4s_common(int pllc0_on)
 
 static void sh7372_pm_setup_smfram(void)
 {
+	/* pass physical address of cpu_resume() to assembly resume code */
+	sh7372_cpu_resume = virt_to_phys(cpu_resume);
+
 	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
 }
 #else
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index a9df53b69ab..53f4840e494 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -40,7 +40,10 @@
 	.global sh7372_resume_core_standby_sysc
 sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
-1:	.long   cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
+
+	.globl	sh7372_cpu_resume
+sh7372_cpu_resume:
+1:	.space	4
 
 #define SPDCR 0xe6180008
 
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index e38691b4d0d..80991b35f4a 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -40,8 +40,10 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Tell ROM loader about our vector (in headsmp-scu.S) */
-	emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu));
+	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+	emev2_set_boot_vector(__pa(shmobile_boot_vector));
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index a853bf182ed..526cfaae81c 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -101,8 +101,10 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Map the reset vector (in headsmp-scu.S) */
-	__raw_writel(__pa(shmobile_secondary_vector_scu), AVECR);
+	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
+	__raw_writel(__pa(shmobile_boot_vector), AVECR);
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 496592b6c76..d613113a04b 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -64,9 +64,11 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Map the reset vector (in headsmp-scu.S) */
+	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
+	__raw_writel(__pa(shmobile_boot_vector), SBAR);
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);