Merge branch 'spear/pinctrl' into spear/clock

Conflicts:
	arch/arm/mach-spear3xx/Makefile
	arch/arm/mach-spear3xx/clock.c
	arch/arm/mach-spear3xx/include/mach/generic.h
	arch/arm/mach-spear6xx/clock.c
	arch/arm/plat-spear/Makefile
	drivers/pinctrl/core.c

This resolves some annoying merge conflicts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 9 insertions, 166 deletions

diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 15c107aad20..c10eac6c10c 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,12 +14,12 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <plat/padmux.h>
 
 /* spear3xx declarations */
 /*
@@ -31,171 +31,16 @@
 #define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
 
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
 void __init spear_setup_timer(void);
 void __init spear3xx_clk_init(void);
 void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
-/* pad mux declarations */
-#define PMX_FIRDA_MASK		(1 << 14)
-#define PMX_I2C_MASK		(1 << 13)
-#define PMX_SSP_CS_MASK		(1 << 12)
-#define PMX_SSP_MASK		(1 << 11)
-#define PMX_MII_MASK		(1 << 10)
-#define PMX_GPIO_PIN0_MASK	(1 << 9)
-#define PMX_GPIO_PIN1_MASK	(1 << 8)
-#define PMX_GPIO_PIN2_MASK	(1 << 7)
-#define PMX_GPIO_PIN3_MASK	(1 << 6)
-#define PMX_GPIO_PIN4_MASK	(1 << 5)
-#define PMX_GPIO_PIN5_MASK	(1 << 4)
-#define PMX_UART0_MODEM_MASK	(1 << 3)
-#define PMX_UART0_MASK		(1 << 2)
-#define PMX_TIMER_3_4_MASK	(1 << 1)
-#define PMX_TIMER_1_2_MASK	(1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4660c0d8ec0..defa374f5be 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -17,7 +17,4 @@
 #include <plat/hardware.h>
 #include <mach/spear.h>
 
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
 #endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 88110952206..e7bc8bab83f 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -25,8 +25,9 @@
 
 /* ICM1 - Low speed connection */
 #define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE		UL(0xFD000000)
 #define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
+#define VA_SPEAR3XX_ICM1_UART_BASE	(VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
 #define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
@@ -53,11 +54,11 @@
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
 #define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
 #define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
 
 /* ICM3 - Basic Subsystem */
 #define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
 #define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
 #define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
@@ -65,9 +66,9 @@
 #define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
 #define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
 #define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */