SPEAr: Add PL080 DMA support for 3xx and 6xx

Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA
controller. This patch adds in support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

6 files changed, 599 insertions, 1 deletions

diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 9293c144b24..eeafe38eab2 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -701,7 +701,7 @@ static struct clk_lookup spear_clk_lookups[] = {
 	/* clock derived from ahb clk */
 	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
 	CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
-	CLKDEV_INIT("dma", NULL, &dma_clk),
+	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
 	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
 	CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
 	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 84ee2bbf133..a7569584cbe 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,6 +14,7 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
@@ -33,6 +34,7 @@
 /* Add spear3xx family device structure declarations here */
 extern struct sys_timer spear3xx_timer;
 extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
 void __init spear_setup_timer(void);
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index c876c6a2caa..f46fc2692ab 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -13,6 +13,7 @@
 
 #define pr_fmt(fmt) "SPEAr300: " fmt
 
+#include <linux/amba/pl08x.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
@@ -440,10 +441,199 @@ static struct pmx_dev *spear300_evb_pmx_devs[] = {
 	&spear300_pmx_gpio1,
 };
 
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
 /* Add SPEAr300 auxdata to pass platform data */
 static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
 			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
 	{}
 };
 
@@ -451,6 +641,9 @@ static void __init spear300_dt_init(void)
 {
 	int ret = -EINVAL;
 
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
+
 	of_platform_populate(NULL, of_default_bus_match_table,
 			spear300_auxdata_lookup, NULL);
 
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 641fd4cf6bc..063e7da0438 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -284,6 +284,193 @@ static struct pmx_dev *spear310_evb_pmx_devs[] = {
 	&spear310_pmx_tdm0,
 };
 
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
 /* uart devices plat data */
 static struct amba_pl011_data spear310_uart_data[] = {
 	{
@@ -313,6 +500,8 @@ static struct amba_pl011_data spear310_uart_data[] = {
 static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
 			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
 	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
 			&spear310_uart_data[0]),
 	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
@@ -331,6 +520,9 @@ static void __init spear310_dt_init(void)
 	void __iomem *base;
 	int ret = 0;
 
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
 	of_platform_populate(NULL, of_default_bus_match_table,
 			spear310_auxdata_lookup, NULL);
 
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 9c571d0f20c..1e74031e121 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -535,6 +535,193 @@ static struct pmx_dev *spear320_evb_pmx_devs[] = {
 	&spear320_pmx_mii1,
 };
 
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
 static struct pl022_ssp_controller spear320_ssp_data[] = {
 	{
 		.bus_id = 1,
@@ -569,6 +756,8 @@ static struct amba_pl011_data spear320_uart_data[] = {
 static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
 			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
 	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
 			&spear320_ssp_data[0]),
 	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
@@ -585,6 +774,9 @@ static void __init spear320_dt_init(void)
 	void __iomem *base;
 	int ret = 0;
 
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
 	of_platform_populate(NULL, of_default_bus_match_table,
 			spear320_auxdata_lookup, NULL);
 
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index a94d8c12ed9..17d4ac9a95e 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -17,7 +17,9 @@
 #include <linux/amba/pl08x.h>
 #include <linux/of_irq.h>
 #include <linux/io.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
 #include <mach/hardware.h>
 
@@ -465,6 +467,23 @@ struct pl022_ssp_controller pl022_plat_data = {
 	.num_chipselect = 2,
 };
 
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+};
+
 /*
  * Following will create 16MB static virtual/physical mappings
  * PHYSICAL		VIRTUAL