ARM: spear: remove most mach/*.h header contents

The register and irq definitions in mach/*.h for spear3xx and
spear6xx are now mostly obsolete, after the platforms have been
converted to device tree based probing and the data is now
part of the device tree files.

The misc_regs.h contents are moved into clock.c because that is
the only user, aside from the DMA_CHN_CFG that should eventually
get handled differently. Some of the contents of mach/spear.h
still remain, because they are used to set up the static map table,
timer, uart and auxdata tables, but almost everything got removed.
We might remove everything but the map table as the DT conversion
completes, but that is not a priority. I've also made sure to
make both copies of spear.h more or less identical so we can
eventually combine them.

The spear3?0.h files were only used by the spear3?0.c files, so I
merged the contents in there and removed the bits that were unused.
This is something that should still be looked at.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@st.com>

1 files changed, 25 insertions, 24 deletions

diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5b9e30f54cd..de194dbb837 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -14,6 +14,8 @@
  */
 
 #include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -21,9 +23,11 @@
 #include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
 #include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 /* dmac device registration */
 static struct pl08x_channel_data spear600_dma_info[] = {
@@ -384,32 +388,29 @@ struct pl08x_platform_data pl080_plat_data = {
 	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
 };
 
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+		.length		= 2 * SZ_16M,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+	},	{
+		.virtual	= VA_SPEAR6XX_ICM1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -447,7 +448,7 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
 }
 
 struct sys_timer spear6xx_timer = {