diff options
| author | H. Peter Anvin <hpa@linux.intel.com> | 2012-10-19 07:54:24 -0700 |
|---|---|---|
| committer | H. Peter Anvin <hpa@linux.intel.com> | 2012-10-19 07:55:09 -0700 |
| commit | 4533d86270d7986e00594495dde9a109d6be27ae (patch) | |
| tree | c2473cac653f7b98e5bd5e6475e63734be4b7644 /arch/arm/mach-u300/u300-gpio.h | |
| parent | 21c5e50e15b1abd797e62f18fd7f90b9cc004cbd (diff) | |
| parent | 5bc66170dc486556a1e36fd384463536573f4b82 (diff) | |
Merge commit '5bc66170dc486556a1e36fd384463536573f4b82' into x86/urgent
From Borislav Petkov <bp@amd64.org>:
Below is a RAS fix which reverts the addition of a sysfs attribute
which we agreed is not needed, post-factum. And this should go in now
because that sysfs attribute is going to end up in 3.7 otherwise and
thus exposed to userspace; removing it then would be a lot harder.
This is done as a merge rather than a simple patch/cherry-pick since
the baseline for this patch was not in the previous x86/urgent.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Diffstat (limited to 'arch/arm/mach-u300/u300-gpio.h')
| -rw-r--r-- | arch/arm/mach-u300/u300-gpio.h | 46 |
1 files changed, 1 insertions, 45 deletions
diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h index 847dc25300c..83f50772e16 100644 --- a/arch/arm/mach-u300/u300-gpio.h +++ b/arch/arm/mach-u300/u300-gpio.h @@ -1,50 +1,11 @@ /* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. + * Individual pin assignments for the B335/S335. * Notice that the actual usage of these pins depends on the * PAD MUX settings, that is why the same number can potentially * appear several times. In the reference design each pin is only * used for one purpose. These were determined by inspecting the * S365 schematic. */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) #define U300_GPIO_PIN_UART_RX 0 #define U300_GPIO_PIN_UART_TX 1 #define U300_GPIO_PIN_UART_CTS 2 @@ -90,8 +51,6 @@ #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ -#ifdef CONFIG_MACH_U300_BS335 - #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ @@ -109,6 +68,3 @@ #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif |