ARM: ux500: Remove redundant board file for mmci platform data

Since all platform data has been transfered to DT, we don't need the
container for the mmci platform data anymore. Remove the file and the
corresponding references to it's data.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 166 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index fcbf3a13a53..00000000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_UHS_SDR12 |
-				MMC_CAP_UHS_SDR25,
-	.gpio_wp	= -1,
-	.sigdir		= MCI_ST_FBCLKEN |
-				MCI_ST_CMDDIREN |
-				MCI_ST_DATA0DIREN |
-				MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_NONREMOVABLE,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &sdi1_dma_cfg_rx,
-	.dma_tx_param	= &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
-#endif
-};