Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...

12 files changed, 17 insertions, 15 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index e8c3f0d70ca..5dea90636d9 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,8 +7,8 @@ config UX500_SOC_COMMON
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
+	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
-	select HAS_MTU
 	select PINCTRL
 	select PINCTRL_NOMADIK
 	select PL310_ERRATA_753970 if CACHE_PL310
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index bde91a58e10..7209db7cdc7 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -8,8 +8,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/devices.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 9c8e4a9e83e..051b62c2710 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -11,9 +11,9 @@
 #include <linux/amba/mmci.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5b70212c253..d453522edb0 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -36,13 +36,12 @@
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
-#include <plat/ste_dma40.h>
-
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 93442fcd9eb..db0bb75e2c7 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -21,16 +21,19 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/regulator/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/random.h>
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
+
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/db8500-regs.h>
+#include <mach/irqs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 692a77a1c15..16b5f71e697 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -14,6 +14,7 @@
 #include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #include "devices-common.h"
 
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 91754a8a0d4..318d4902089 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,11 +12,11 @@
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
+#include <mach/irqs.h>
 
 #include "ste-dma40-db8500.h"
 
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3c8010f4fb3..4b24c999265 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,6 +8,7 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
+#include <mach/irqs.h>
 #include "devices-common.h"
 
 struct ske_keypad_platform_data;
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index e8928548b6a..fc77b4274c8 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -46,6 +46,6 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#define NR_IRQS			IRQ_BOARD_END
+#define UX500_NR_IRQS		IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 3cc7142eee0..9991aea3d57 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -8,7 +8,7 @@
 #ifndef __MSP_H
 #define __MSP_H
 
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 enum msp_i2s_id {
 	MSP_I2S_0 = 0,
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 6f39731951b..875309acb02 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -9,11 +9,10 @@
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
 
 #include <asm/smp_twd.h>
 
-#include <plat/mtu.h>
-
 #include <mach/setup.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -96,7 +95,7 @@ dt_fail:
 	 *
 	 */
 
-	nmdk_timer_init(mtu_timer_base);
+	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 145482e7441..78ac65f62e8 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,10 +7,10 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
-#include <plat/ste_dma40.h>
 #include <mach/hardware.h>
-#include <linux/platform_data/usb-musb-ux500.h>
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \