Merge branch 'misc' into devel

Conflicts:
	arch/arm/Kconfig
	arch/arm/common/Makefile
	arch/arm/kernel/Makefile
	arch/arm/kernel/smp.c

5 files changed, 30 insertions, 70 deletions

diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1675047daf2..531de5c6364 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -13,8 +13,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <plat/mtu.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index a6be2cdf2b2..64fa451edcf 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -23,7 +23,6 @@ ENTRY(u8500_secondary_startup)
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
 	add	r6, r6, r4
-	dsb
 pen:	ldr	r7, [r6]
 	cmp	r7, r0
 	bne	pen
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index b782a03024b..dd8037ebccf 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -11,14 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void platform_do_lowpower(unsigned int cpu)
 {
 	flush_cache_all();
@@ -38,7 +35,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -48,19 +45,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/* directly enter low power state, skipping secure registers */
 	platform_do_lowpower(cpu);
 }
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index 197e8417375..ca2b15b1b3b 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,7 +10,6 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
@@ -18,8 +17,8 @@ extern void u8500_secondary_startup(void);
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 #endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index b5077b4c419..2115a0cf07b 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,7 +18,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 
@@ -28,17 +27,23 @@
  */
 volatile int __cpuinitdata pen_release = -1;
 
-static unsigned int __init get_core_count(void)
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
 {
-	return scu_get_core_count(__io_address(UX500_SCU_BASE));
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
 }
 
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -50,7 +55,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -74,11 +79,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
+	write_pen_release(cpu);
 
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -97,9 +100,6 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
 	/*
 	 * write the address of secondary startup into the backup ram register
 	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
@@ -126,40 +126,26 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
+	ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "U8500: strange CM count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
-	if (ncores > num_possible_cpus())	{
+	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "U8500: no. of cores (%d) greater than configured "
 		       "maximum of %d - clipping\n",
-		       ncores, num_possible_cpus());
-		ncores = num_possible_cpus();
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
 	}
 
-	smp_store_cpu_info(cpu);
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
 
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
 
 	/*
 	 * Initialise the present map, which describes the set of CPUs
@@ -168,13 +154,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-		scu_enable(__io_address(UX500_SCU_BASE));
-		wakeup_secondary();
-	}
+	scu_enable(__io_address(UX500_SCU_BASE));
+	wakeup_secondary();
 }