Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: Non-critical bug fixes" from Ardn Bergmann:
 "Simple bug fixes that were not considered important enough for
  inclusion into 3.3.  One bug fix was originally intended for 3.3 but
  accidentally got missed, but is not marked stable because it should
  only get backported once later fixes also make it into v3.4.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits)
  iomux-mx25.h slew rate adjusted for LCD __LD pins
  ARM: davinci: DA850: move da850_register_pm to .init.text
  ARM: davinci: cpufreq: fix compiler warning
  ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
  ARM: OMAP2+: Fix section warnings for hsmmc_init_one
  ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
  ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance
  ARM: OMAP3+: PM: VP: fix integer truncation error
  ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled
  ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices()
  ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set
  ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected
  ARM: OMAP1: Fix section mismatch for omap1_init_early()
  ARM: OMAP1: Fix typo in lcd_dma.c
  ARM: OMAP: mailbox: trivial whitespace fix
  ARM: OMAP: Remove definition cpu_is_omap4430()
  ARM: OMAP2+: included some headers twice
  ARM: OMAP: clock.c: included linux/debugfs.h twice
  ARM: OMAP: don't build hwspinlock in vain
  ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  ...

11 files changed, 74 insertions, 23 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c59e8b892d6..9ec63581234 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -8,47 +8,55 @@ config UX500_SOC_COMMON
 	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
-
-menu "Ux500 SoC"
+	select CACHE_L2X0
 
 config UX500_SOC_DB5500
-	bool "DB5500"
+	bool
 	select MFD_DB5500_PRCMU
 
 config UX500_SOC_DB8500
-	bool "DB8500"
+	bool
 	select MFD_DB8500_PRCMU
 	select REGULATOR_DB8500_PRCMU
-
-endmenu
+	select CPU_FREQ_TABLE if CPU_FREQ
 
 menu "Ux500 target platform (boards)"
 
-config MACH_U8500
-	bool "U8500 Development platform"
-	depends on UX500_SOC_DB8500
-	select TPS6105X
+config MACH_MOP500
+	bool "U8500 Development platform, MOP500 versions"
+	select UX500_SOC_DB8500
+	select I2C
+	select I2C_NOMADIK
 	help
-	  Include support for the mop500 development platform.
+	  Include support for the MOP500 development platform.
 
 config MACH_HREFV60
-       bool "U85000 Development platform, HREFv60 version"
-       depends on UX500_SOC_DB8500
-       help
-         Include support for the HREFv60 new development platform.
+	bool "U8500 Development platform, HREFv60 version"
+	select MACH_MOP500
+	help
+	  Include support for the HREFv60 new development platform.
+	  Includes HREFv70, v71 etc.
 
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
-	depends on UX500_SOC_DB8500
-	select MACH_U8500
+	select MACH_MOP500
 	help
 	  Include support for the snowball development platform.
 
 config MACH_U5500
 	bool "U5500 Development platform"
-	depends on UX500_SOC_DB5500
+	select UX500_SOC_DB5500
 	help
 	  Include support for the U5500 development platform.
+
+config UX500_AUTO_PLATFORM
+	def_bool y
+	depends on !MACH_U5500
+	select MACH_MOP500
+	help
+	  At least one platform needs to be selected in order to build
+	  a working kernel. If everything else is disabled, this
+	  automatically enables MACH_MOP500.
 endmenu
 
 config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 6bd2f451c18..8dd75f210d2 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,7 +7,7 @@ obj-y				:= clock.o cpu.o devices.o devices-common.o \
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 2735d03996c..52426a42578 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -74,6 +74,26 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
 };
 
+static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
+	/* AB8500 audio-codec main supply */
+	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+	/* AB8500 audio-codec Mic1 supply */
+	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+	/* AB8500 audio-codec Mic2 supply */
+	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+	/* AB8500 audio-codec DMic supply */
+	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
+};
+
 static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
 	/* SoC core supply, no device */
 	REGULATOR_SUPPLY("v-intcore", NULL),
@@ -323,6 +343,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-AUD",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+		.consumer_supplies = ab8500_vaud_consumers,
 	},
 	/* supply for v-anamic1 VAMic1-LDO */
 	[AB8500_LDO_ANAMIC1] = {
@@ -330,6 +352,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-AMIC1",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+		.consumer_supplies = ab8500_vamic1_consumers,
 	},
 	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
 	[AB8500_LDO_ANAMIC2] = {
@@ -337,6 +361,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-AMIC2",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+		.consumer_supplies = ab8500_vamic2_consumers,
 	},
 	/* supply for v-dmic, VDMIC LDO */
 	[AB8500_LDO_DMIC] = {
@@ -344,6 +370,8 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.name = "V-DMIC",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+		.consumer_supplies = ab8500_vdmic_consumers,
 	},
 	/* supply for v-intcore12, VINTCORE12 LDO */
 	[AB8500_LDO_INTCORE] = {
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index feb5744d98b..ead91c968ff 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -8,7 +8,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/input/matrix_keypad.h>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712907d..6d672a556df 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -72,7 +72,7 @@ static struct platform_device snowball_led_dev = {
 };
 
 static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_GPIO(0),
+	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
 	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
 	/* config_reg is the initial configuration of ab8500 pins.
 	 * The pins can be configured as GPIO or alt functions based
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3db620..7ff6cbffc10 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -63,7 +63,7 @@
  * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
  * parens matches the GPIO pin number in the data sheet.
  */
-#define MOP500_AB8500_GPIO(x)		(MOP500_EGPIO_END + (x) - 1)
+#define MOP500_AB8500_PIN_GPIO(x)	(MOP500_EGPIO_END + (x) - 1)
 /*Snowball AB8500 GPIO */
 #define SNOWBALL_VSMPS2_1V8_GPIO	MOP500_AB8500_PIN_GPIO(1)	/* SYSCLKREQ2/GPIO1 */
 #define SNOWBALL_PM_GPIO1_GPIO		MOP500_AB8500_PIN_GPIO(2)	/* SYSCLKREQ3/GPIO2 */
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 73790753700..ec35f0aa566 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -223,6 +223,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	/*TODO*/
+	return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 static void clk_prcmu_enable(struct clk *clk)
 {
 	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index 07449070522..d776ada08db 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -21,6 +21,7 @@ struct clkops {
 	void (*enable) (struct clk *);
 	void (*disable) (struct clk *);
 	unsigned long (*get_rate) (struct clk *);
+	int (*set_parent)(struct clk *, struct clk *);
 };
 
 /**
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index a7c6cdc9b11..6e66d3777ed 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -101,6 +101,9 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
 	[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
 	[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
 	[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
+	[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
 };
 
 /* Mapping between source event lines and physical device address */
@@ -133,6 +136,9 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
 	[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
 	[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
 	[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
+	[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
 };
 
 /* Reserved event lines for memcpy only */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index b6ba26a1367..d93d6dbef25 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -30,6 +30,8 @@
 #include <mach/db8500-regs.h>
 #include <mach/db5500-regs.h>
 
+#define MSP_TX_RX_REG_OFFSET	0
+
 #ifndef __ASSEMBLY__
 
 #include <mach/id.h>
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 9db68d264c5..c23a6b5f0c4 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -43,7 +43,7 @@
 /* This will be overridden by board-specific irq headers */
 #define IRQ_BOARD_END		IRQ_BOARD_START
 
-#ifdef CONFIG_MACH_U8500
+#ifdef CONFIG_MACH_MOP500
 #include <mach/irqs-board-mop500.h>
 #endif