Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

6 files changed, 5 insertions, 193 deletions

diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d95db..9adcb9e76f5 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -4,9 +4,10 @@ config ARCH_VT8500
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_OF
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
+	select VT8500_TIMER
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index e035251cda4..92ceb2436b6 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 6f2b843115d..77611a6968d 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,7 +18,6 @@
 
 #include <linux/of.h>
 
-void __init vt8500_timer_init(void);
 int __init vt8500_irq_init(struct device_node *node,
 				struct device_node *parent);
 
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
index e6e81fdaf10..5b4f19ecb4c 100644
--- a/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -34,4 +34,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
deleted file mode 100644
index 3dd21a47881..00000000000
--- a/arch/arm/mach-vt8500/timer.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/timer.c
- *
- *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * This file is copied and modified from the original timer.c provided by
- * Alexey Charkov. Minor changes have been made for Device Tree Support.
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/delay.h>
-#include <asm/mach/time.h>
-
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#define VT8500_TIMER_OFFSET	0x0100
-#define VT8500_TIMER_HZ		3000000
-#define TIMER_MATCH_VAL		0x0000
-#define TIMER_COUNT_VAL		0x0010
-#define TIMER_STATUS_VAL	0x0014
-#define TIMER_IER_VAL		0x001c		/* interrupt enable */
-#define TIMER_CTRL_VAL		0x0020
-#define TIMER_AS_VAL		0x0024		/* access status */
-#define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
-#define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
-#define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-static void __iomem *regbase;
-
-static cycle_t vt8500_timer_read(struct clocksource *cs)
-{
-	int loops = msecs_to_loops(10);
-	writel(3, regbase + TIMER_CTRL_VAL);
-	while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
-						&& --loops)
-		cpu_relax();
-	return readl(regbase + TIMER_COUNT_VAL);
-}
-
-static struct clocksource clocksource = {
-	.name           = "vt8500_timer",
-	.rating         = 200,
-	.read           = vt8500_timer_read,
-	.mask           = CLOCKSOURCE_MASK(32),
-	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int vt8500_timer_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	int loops = msecs_to_loops(10);
-	cycle_t alarm = clocksource.read(&clocksource) + cycles;
-	while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
-						&& --loops)
-		cpu_relax();
-	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
-
-	if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
-		return -ETIME;
-
-	writel(1, regbase + TIMER_IER_VAL);
-
-	return 0;
-}
-
-static void vt8500_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel(readl(regbase + TIMER_CTRL_VAL) | 1,
-			regbase + TIMER_CTRL_VAL);
-		writel(0, regbase + TIMER_IER_VAL);
-		break;
-	}
-}
-
-static struct clock_event_device clockevent = {
-	.name           = "vt8500_timer",
-	.features       = CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_next_event = vt8500_timer_set_next_event,
-	.set_mode       = vt8500_timer_set_mode,
-};
-
-static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	writel(0xf, regbase + TIMER_STATUS_VAL);
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq = {
-	.name    = "vt8500_timer",
-	.flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = vt8500_timer_interrupt,
-	.dev_id  = &clockevent,
-};
-
-static struct of_device_id vt8500_timer_ids[] = {
-	{ .compatible = "via,vt8500-timer" },
-	{ }
-};
-
-void __init vt8500_timer_init(void)
-{
-	struct device_node *np;
-	int timer_irq;
-
-	np = of_find_matching_node(NULL, vt8500_timer_ids);
-	if (!np) {
-		pr_err("%s: Timer description missing from Device Tree\n",
-								__func__);
-		return;
-	}
-	regbase = of_iomap(np, 0);
-	if (!regbase) {
-		pr_err("%s: Missing iobase description in Device Tree\n",
-								__func__);
-		of_node_put(np);
-		return;
-	}
-	timer_irq = irq_of_parse_and_map(np, 0);
-	if (!timer_irq) {
-		pr_err("%s: Missing irq description in Device Tree\n",
-								__func__);
-		of_node_put(np);
-		return;
-	}
-
-	writel(1, regbase + TIMER_CTRL_VAL);
-	writel(0xf, regbase + TIMER_STATUS_VAL);
-	writel(~0, regbase + TIMER_MATCH_VAL);
-
-	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
-		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
-					__func__, clocksource.name);
-
-	clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
-	/* copy-pasted from mach-msm; no idea */
-	clockevent.max_delta_ns =
-		clockevent_delta2ns(0xf0000000, &clockevent);
-	clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
-	clockevent.cpumask = cpumask_of(0);
-
-	if (setup_irq(timer_irq, &irq))
-		pr_err("%s: setup_irq failed for %s\n", __func__,
-							clockevent.name);
-	clockevents_register_device(&clockevent);
-}
-
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3c66d48ea08..fe99b709f11 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 
@@ -175,10 +176,6 @@ static void __init vt8500_init_irq(void)
 	of_irq_init(vt8500_irq_match);
 };
 
-static struct sys_timer vt8500_timer = {
-	.init = vt8500_timer_init,
-};
-
 static const char * const vt8500_dt_compat[] = {
 	"via,vt8500",
 	"wm,wm8650",
@@ -189,8 +186,8 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_irq	= vt8500_init_irq,
-	.timer		= &vt8500_timer,
 	.init_machine	= vt8500_init,
+	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 	.handle_irq	= vt8500_handle_irq,
 MACHINE_END