ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl

Aurora Cache Controller was designed to be compatible with the ARM L2
Cache Controller. It comes with some difference or improvement such
as:
- no cache id part number available through hardware (need to get it
  by the DT).
- always write through mode available.
- two flavors of the controller outer cache and system cache (meaning
  maintenance operations on L1 are broadcasted to the L2 and L2
  performs the same operation).
- in outer cache mode, the cache maintenance operations are improved and
  can be done on a range inside a page and are not limited to a cache
  line.

Tested-and-Reviewed-by: Lior Amsalem <alior@marvell.com>

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 55 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h
new file mode 100644
index 00000000000..c8612476983
--- /dev/null
+++ b/arch/arm/mm/cache-aurora-l2.h
@@ -0,0 +1,55 @@
+/*
+ * AURORA shared L2 cache controller support
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
+#define __ASM_ARM_HARDWARE_AURORA_L2_H
+
+#define AURORA_SYNC_REG		    0x700
+#define AURORA_RANGE_BASE_ADDR_REG  0x720
+#define AURORA_FLUSH_PHY_ADDR_REG   0x7f0
+#define AURORA_INVAL_RANGE_REG	    0x774
+#define AURORA_CLEAN_RANGE_REG	    0x7b4
+#define AURORA_FLUSH_RANGE_REG	    0x7f4
+
+#define AURORA_ACR_REPLACEMENT_OFFSET	    27
+#define AURORA_ACR_REPLACEMENT_MASK	     \
+	(0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR    \
+	(0 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_LFSR     \
+	(1 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \
+	(3 << AURORA_ACR_REPLACEMENT_OFFSET)
+
+#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET	0
+#define AURORA_ACR_FORCE_WRITE_POLICY_MASK	\
+	(0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_POLICY_DIS	\
+	(0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_BACK_POLICY	\
+	(1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_THRO_POLICY	\
+	(2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+
+#define MAX_RANGE_SIZE		1024
+
+#define AURORA_WAY_SIZE_SHIFT	2
+
+#define AURORA_CTRL_FW		0x100
+
+/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make
+ * the distinction between a number coming from hardware and a number
+ * coming from the device tree */
+#define AURORA_CACHE_ID	       0x100
+
+#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */