Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 32b3558321c..d0390f4b3f1 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -36,14 +36,14 @@
 #define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
 ENTRY(cpu_v6_proc_init)
-	mov	pc, lr
+	ret	lr
 
 ENTRY(cpu_v6_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
+	ret	lr
 
 /*
  *	cpu_v6_reset(loc)
@@ -62,7 +62,7 @@ ENTRY(cpu_v6_reset)
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c5, 4		@ ISB
-	mov	pc, r0
+	ret	r0
 ENDPROC(cpu_v6_reset)
 	.popsection
 
@@ -77,14 +77,14 @@ ENTRY(cpu_v6_do_idle)
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
 	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
-	mov	pc, lr
+	ret	lr
 
 ENTRY(cpu_v6_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	subs	r1, r1, #D_CACHE_LINE_SIZE
 	bhi	1b
-	mov	pc, lr
+	ret	lr
 
 /*
  *	cpu_v6_switch_mm(pgd_phys, tsk)
@@ -113,7 +113,7 @@ ENTRY(cpu_v6_switch_mm)
 #endif
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 #endif
-	mov	pc, lr
+	ret	lr
 
 /*
  *	cpu_v6_set_pte_ext(ptep, pte, ext)
@@ -131,7 +131,7 @@ ENTRY(cpu_v6_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv6_set_pte_ext cpu_v6
 #endif
-	mov	pc, lr
+	ret	lr
 
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl	cpu_v6_suspend_size
@@ -241,7 +241,7 @@ __v6_setup:
 	mcreq	p15, 0, r5, c1, c0, 1		@ write aux control reg
 	orreq	r0, r0, #(1 << 21)		@ low interrupt latency configuration
 #endif
-	mov	pc, lr				@ return to head.S:__ret
+	ret	lr				@ return to head.S:__ret
 
 	/*
 	 *         V X F   I D LR