Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...

1 files changed, 17 insertions, 17 deletions

diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index d19b1cfcad9..23259f104c6 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -118,7 +118,7 @@ ENTRY(cpu_xscale_proc_init)
 	mrc	p15, 0, r1, c1, c0, 1
 	bic	r1, r1, #1
 	mcr	p15, 0, r1, c1, c0, 1
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_xscale_proc_fin()
@@ -128,7 +128,7 @@ ENTRY(cpu_xscale_proc_fin)
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_xscale_reset(loc)
@@ -160,7 +160,7 @@ ENTRY(cpu_xscale_reset)
 	@ CAUTION: MMU turned off from this point. We count on the pipeline
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	mov	pc, r0
+	ret	r0
 ENDPROC(cpu_xscale_reset)
 	.popsection
 
@@ -179,7 +179,7 @@ ENDPROC(cpu_xscale_reset)
 ENTRY(cpu_xscale_do_idle)
 	mov	r0, #1
 	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
-	mov	pc, lr
+	ret	lr
 
 /* ================================= CACHE ================================ */
 
@@ -191,7 +191,7 @@ ENTRY(cpu_xscale_do_idle)
 ENTRY(xscale_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
+	ret	lr
 ENDPROC(xscale_flush_icache_all)
 
 /*
@@ -216,7 +216,7 @@ __flush_whole_cache:
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_user_cache_range(start, end, vm_flags)
@@ -245,7 +245,7 @@ ENTRY(xscale_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	coherent_kern_range(start, end)
@@ -269,7 +269,7 @@ ENTRY(xscale_coherent_kern_range)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	coherent_user_range(start, end)
@@ -291,7 +291,7 @@ ENTRY(xscale_coherent_user_range)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 6		@ Invalidate BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -312,7 +312,7 @@ ENTRY(xscale_flush_kern_dcache_area)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_inv_range(start, end)
@@ -336,7 +336,7 @@ xscale_dma_inv_range:
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_clean_range(start, end)
@@ -353,7 +353,7 @@ xscale_dma_clean_range:
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_flush_range(start, end)
@@ -371,7 +371,7 @@ ENTRY(xscale_dma_flush_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_map_area(start, size, dir)
@@ -407,7 +407,7 @@ ENDPROC(xscale_80200_A0_A1_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(xscale_dma_unmap_area)
-	mov	pc, lr
+	ret	lr
 ENDPROC(xscale_dma_unmap_area)
 
 	.globl	xscale_flush_kern_cache_louis
@@ -458,7 +458,7 @@ ENTRY(cpu_xscale_dcache_clean_area)
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
-	mov	pc, lr
+	ret	lr
 
 /* =============================== PageTable ============================== */
 
@@ -521,7 +521,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 	orr	r2, r2, ip
 
 	xscale_set_pte_ext_epilogue
-	mov	pc, lr
+	ret	lr
 
 	.ltorg
 	.align
@@ -572,7 +572,7 @@ __xscale_setup:
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
 	bic	r0, r0, r5
 	orr	r0, r0, r6
-	mov	pc, lr
+	ret	lr
 	.size	__xscale_setup, . - __xscale_setup
 
 	/*