Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

1 files changed, 43 insertions, 2 deletions

diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 5a37c5e45c4..086038cd86a 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -513,11 +513,49 @@ ENTRY(cpu_xscale_set_pte_ext)
 	xscale_set_pte_ext_epilogue
 	mov	pc, lr
 
-
 	.ltorg
-
 	.align
 
+.globl	cpu_xscale_suspend_size
+.equ	cpu_xscale_suspend_size, 4 * 7
+#ifdef CONFIG_PM
+ENTRY(cpu_xscale_do_suspend)
+	stmfd	sp!, {r4 - r10, lr}
+	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
+	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
+	mrc	p15, 0, r6, c13, c0, 0	@ PID
+	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
+	mrc	p15, 0, r8, c2, c0, 0	@ translation table base addr
+	mrc	p15, 0, r9, c1, c1, 0	@ auxiliary control reg
+	mrc	p15, 0, r10, c1, c0, 0	@ control reg
+	bic	r4, r4, #2		@ clear frequency change bit
+	stmia	r0, {r4 - r10}		@ store cp regs
+	ldmfd	sp!, {r4 - r10, pc}
+ENDPROC(cpu_xscale_do_suspend)
+
+ENTRY(cpu_xscale_do_resume)
+	ldmia	r0, {r4 - r10}		@ load cp regs
+	mov	ip, #0
+	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
+	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
+	mcr	p14, 0, r4, c6, c0, 0	@ clock configuration, turbo mode.
+	mcr	p15, 0, r5, c15, c1, 0	@ CP access reg
+	mcr	p15, 0, r6, c13, c0, 0	@ PID
+	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
+	mcr	p15, 0, r8, c2, c0, 0	@ translation table base addr
+	mcr	p15, 0, r9, c1, c1, 0	@ auxiliary control reg
+	mov	r0, r10			@ control register
+	mov	r2, r8, lsr #14		@ get TTB0 base
+	mov	r2, r2, lsl #14
+	ldr	r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+		     PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+	b	cpu_resume_mmu
+ENDPROC(cpu_xscale_do_resume)
+#else
+#define cpu_xscale_do_suspend	0
+#define cpu_xscale_do_resume	0
+#endif
+
 	__CPUINIT
 
 	.type	__xscale_setup, #function
@@ -565,6 +603,9 @@ ENTRY(xscale_processor_functions)
 	.word	cpu_xscale_dcache_clean_area
 	.word	cpu_xscale_switch_mm
 	.word	cpu_xscale_set_pte_ext
+	.word	cpu_xscale_suspend_size
+	.word	cpu_xscale_do_suspend
+	.word	cpu_xscale_do_resume
 	.size	xscale_processor_functions, . - xscale_processor_functions
 
 	.section ".rodata"