Merge branch 'master' into for-next

Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.

13 files changed, 112 insertions, 32 deletions

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 0074b8dba79..88633fe01a5 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -821,7 +821,8 @@ config CACHE_L2X0
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
+		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
+		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S
index 52162d59407..2cbf68ef0e8 100644
--- a/arch/arm/mm/abort-macro.S
+++ b/arch/arm/mm/abort-macro.S
@@ -17,7 +17,7 @@
 	cmp	\tmp, # 0x5600			@ Is it ldrsb?
 	orreq	\tmp, \tmp, #1 << 11		@ Set L-bit if yes
 	tst	\tmp, #1 << 11			@ L = 0 -> write
-	orreq	\psr, \psr, #1 << 11		@ yes.
+	orreq	\fsr, \fsr, #1 << 11		@ yes.
 	b	do_DataAbort
 not_thumb:
 	.endm
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index be7c638b648..cfbcf8b9559 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -22,6 +22,7 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 
+#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "fault.h"
@@ -95,6 +96,33 @@ static const char *usermode_action[] = {
 	"signal+warn"
 };
 
+/* Return true if and only if the ARMv6 unaligned access model is in use. */
+static bool cpu_is_v6_unaligned(void)
+{
+	return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U);
+}
+
+static int safe_usermode(int new_usermode, bool warn)
+{
+	/*
+	 * ARMv6 and later CPUs can perform unaligned accesses for
+	 * most single load and store instructions up to word size.
+	 * LDM, STM, LDRD and STRD still need to be handled.
+	 *
+	 * Ignoring the alignment fault is not an option on these
+	 * CPUs since we spin re-faulting the instruction without
+	 * making any progress.
+	 */
+	if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) {
+		new_usermode |= UM_FIXUP;
+
+		if (warn)
+			printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.\n");
+	}
+
+	return new_usermode;
+}
+
 static int alignment_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "User:\t\t%lu\n", ai_user);
@@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer
 		if (get_user(mode, buffer))
 			return -EFAULT;
 		if (mode >= '0' && mode <= '5')
-			ai_usermode = mode - '0';
+			ai_usermode = safe_usermode(mode - '0', true);
 	}
 	return count;
 }
@@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (ai_usermode & UM_FIXUP)
 		goto fixup;
 
-	if (ai_usermode & UM_SIGNAL)
-		force_sig(SIGBUS, current);
-	else {
+	if (ai_usermode & UM_SIGNAL) {
+		siginfo_t si;
+
+		si.si_signo = SIGBUS;
+		si.si_errno = 0;
+		si.si_code = BUS_ADRALN;
+		si.si_addr = (void __user *)addr;
+
+		force_sig_info(si.si_signo, &si, current);
+	} else {
 		/*
 		 * We're about to disable the alignment trap and return to
 		 * user space.  But if an interrupt occurs before actually
@@ -926,20 +961,11 @@ static int __init alignment_init(void)
 		return -ENOMEM;
 #endif
 
-	/*
-	 * ARMv6 and later CPUs can perform unaligned accesses for
-	 * most single load and store instructions up to word size.
-	 * LDM, STM, LDRD and STRD still need to be handled.
-	 *
-	 * Ignoring the alignment fault is not an option on these
-	 * CPUs since we spin re-faulting the instruction without
-	 * making any progress.
-	 */
-	if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+	if (cpu_is_v6_unaligned()) {
 		cr_alignment &= ~CR_A;
 		cr_no_alignment &= ~CR_A;
 		set_cr(cr_alignment);
-		ai_usermode = UM_FIXUP;
+		ai_usermode = safe_usermode(ai_usermode, false);
 	}
 
 	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 44c086710d2..9ecfdb51195 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -277,6 +277,25 @@ static void l2x0_disable(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
+static void __init l2x0_unlock(__u32 cache_id)
+{
+	int lockregs;
+	int i;
+
+	if (cache_id == L2X0_CACHE_ID_PART_L310)
+		lockregs = 8;
+	else
+		/* L210 and unknown types */
+		lockregs = 1;
+
+	for (i = 0; i < lockregs; i++) {
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+	}
+}
+
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 {
 	__u32 aux;
@@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	 * accessing the below registers will fault.
 	 */
 	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+		/* Make sure that I&D is not locked down when starting */
+		l2x0_unlock(cache_id);
 
 		/* l2x0 controller is disabled */
 		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2fee782077c..cc7e2d8be9a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
-	return memblock_is_memory(pfn << PAGE_SHIFT);
+	return memblock_is_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
@@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 static inline void poison_init_mem(void *s, size_t count)
 {
 	u32 *p = (u32 *)s;
-	while ((count = count - 4))
+	for (; count != 0; count -= 4)
 		*p++ = 0xe7fddef0;
 }
 
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
index ffad039cbb7..430df1a5978 100644
--- a/arch/arm/mm/iomap.c
+++ b/arch/arm/mm/iomap.c
@@ -9,6 +9,9 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 
+unsigned long vga_base;
+EXPORT_SYMBOL(vga_base);
+
 #ifdef __io
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
@@ -23,6 +26,15 @@ EXPORT_SYMBOL(ioport_unmap);
 #endif
 
 #ifdef CONFIG_PCI
+unsigned long pcibios_min_io = 0x1000;
+EXPORT_SYMBOL(pcibios_min_io);
+
+unsigned long pcibios_min_mem = 0x01000000;
+EXPORT_SYMBOL(pcibios_min_mem);
+
+unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC;
+EXPORT_SYMBOL(pci_flags);
+
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {
 	resource_size_t start = pci_resource_start(dev, bar);
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 92bd102e398..2e6849b41f6 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
-.equ	cpu_arm920_suspend_size, 4 * 3
+.equ	cpu_arm920_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 2bbcf053dff..cd8f79c3a28 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
-.equ	cpu_arm926_suspend_size, 4 * 3
+.equ	cpu_arm926_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index f8f7ea34bfc..683af3a182b 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -410,6 +410,7 @@ __arm946_proc_info:
 	.long	0x41009460
 	.long	0xff00fff0
 	.long	0
+	.long	0
 	b	__arm946_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -418,6 +419,6 @@ __arm946_proc_info:
 	.long	arm946_processor_functions
 	.long	0
 	.long	0
-	.long	arm940_cache_fns
+	.long	arm946_cache_fns
 	.size	__arm946_proc_info, . - __arm946_proc_info
 
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 07219c2ae11..69e7f2ef738 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend)
 
 ENTRY(cpu_sa1100_do_resume)
 	ldmia	r0, {r4 - r7}			@ load cp regs
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@ flush I+D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@ flush I&D cache
-	mcr	p15, 0, r1, c9, c0, 0		@ invalidate RB
-	mcr	p15, 0, r1, c9, c0, 5		@ allow user space to use RB
+	mov	ip, #0
+	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
+	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
+	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
+	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
 
 	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
 	mcr	p15, 0, r5, c2, c0, 0		@ translation table base addr
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 219138d2f15..a923aa0fd00 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -223,6 +223,22 @@ __v6_setup:
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+#ifdef CONFIG_ARM_ERRATA_364296
+	/*
+	 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
+	 * corruption with hit-under-miss enabled). The conditional code below
+	 * (setting the undocumented bit 31 in the auxiliary control register
+	 * and the FI bit in the control register) disables hit-under-miss
+	 * without putting the processor into full low interrupt latency mode.
+	 */
+	ldr	r6, =0x4107b362			@ id for ARM1136 r0p2
+	mrc	p15, 0, r5, c0, c0, 0		@ get processor id
+	teq	r5, r6				@ check for the faulty core
+	mrceq	p15, 0, r5, c1, c0, 1		@ load aux control reg
+	orreq	r5, r5, #(1 << 31)		@ set the undocumented bit 31
+	mcreq	p15, 0, r5, c1, c0, 1		@ write aux control reg
+	orreq	r0, r0, #(1 << 21)		@ low interrupt latency configuration
+#endif
 	mov	pc, lr				@ return to head.S:__ret
 
 	/*
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a30e78542cc..9049c0764db 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin)
 ENTRY(cpu_v7_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
+ THUMB(	bic	r1, r1, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	isb
 	mov	pc, r0
@@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
+	teq	r4, r10			@ Is it already set?
+	mcrne	p15, 0, r10, c1, c0, 1	@ No, so write it
 	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
 	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
 	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
 	isb
+	dsb
 	mov	r0, r9			@ control register
 	mov	r2, r7, lsr #14		@ get TTB0 base
 	mov	r2, r2, lsl #14
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 64f1fc7edf0..755e1bf2268 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
-#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -407,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	.align
 
 .globl	cpu_xsc3_suspend_size
-.equ	cpu_xsc3_suspend_size, 4 * 8
+.equ	cpu_xsc3_suspend_size, 4 * 7
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
@@ -419,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ auxiliary control reg
 	mrc 	p15, 0, r10, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
-	stmia	r0, {r1, r4 - r10}	@ store v:p offset + cp regs
+	stmia	r0, {r4 - r10}		@ store cp regs
 	ldmia	sp!, {r4 - r10, pc}
 ENDPROC(cpu_xsc3_do_suspend)
 
 ENTRY(cpu_xsc3_do_resume)
-	ldmia	r0, {r1, r4 - r10}	@ load v:p offset + cp regs
+	ldmia	r0, {r4 - r10}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
 	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer