ARM: imx: move iomux drivers and headers into mach-imx

The board files in mach-imx are the only users of iomux drivers and
headers.  Move them into mach-imx from plat-mxc.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 94 deletions

diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
deleted file mode 100644
index 02651a40fe2..00000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_V1_H__
-#define __MACH_IOMUX_V1_H__
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define MXC_DDIR(x)	(0x00 + ((x) << 8))
-#define MXC_OCR1(x)	(0x04 + ((x) << 8))
-#define MXC_OCR2(x)	(0x08 + ((x) << 8))
-#define MXC_ICONFA1(x)	(0x0c + ((x) << 8))
-#define MXC_ICONFA2(x)	(0x10 + ((x) << 8))
-#define MXC_ICONFB1(x)	(0x14 + ((x) << 8))
-#define MXC_ICONFB2(x)	(0x18 + ((x) << 8))
-#define MXC_DR(x)	(0x1c + ((x) << 8))
-#define MXC_GIUS(x)	(0x20 + ((x) << 8))
-#define MXC_SSR(x)	(0x24 + ((x) << 8))
-#define MXC_ICR1(x)	(0x28 + ((x) << 8))
-#define MXC_ICR2(x)	(0x2c + ((x) << 8))
-#define MXC_IMR(x)	(0x30 + ((x) << 8))
-#define MXC_ISR(x)	(0x34 + ((x) << 8))
-#define MXC_GPR(x)	(0x38 + ((x) << 8))
-#define MXC_SWR(x)	(0x3c + ((x) << 8))
-#define MXC_PUEN(x)	(0x40 + ((x) << 8))
-
-#define MX1_NUM_GPIO_PORT	4
-#define MX21_NUM_GPIO_PORT	6
-#define MX27_NUM_GPIO_PORT	6
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT	(1 << 8)
-#define GPIO_IN		(0 << 8)
-#define GPIO_PUEN	(1 << 9)
-
-#define GPIO_PF		(1 << 10)
-#define GPIO_AF		(1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT	14
-#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT	16
-#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
-
-extern int mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label);
-
-extern int imx_iomuxv1_init(void __iomem *base, int numports);
-
-#endif /* __MACH_IOMUX_V1_H__ */