[ARM] MX35: Add register definitions for the i.MX35

This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the
specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and
i.MX35, so always include mx31.h and mx35.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 329 insertions, 323 deletions

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 11f5727ea44..42e4ee37ca1 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,7 +23,9 @@
 #include <asm/sizes.h>
 
 #ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
 #endif
 
 #ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index de026654b00..0b06941b613 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,360 +1,45 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * F8000000	1FFC0000	16K	IRAM
- * F9000000	30000000	256M	L2CC
- * FC000000	43F00000	1M	AIPS 1
- * FC100000	50000000	1M	SPBA
- * FC200000	53F00000	1M	AIPS 2
- * FC500000	60000000	128M	ROMPATCH
- * FC400000	68000000	128M	AVIC
- *         	70000000	256M	IPU (MAX M2)
- *         	80000000	256M	CSD0 SDRAM/DDR
- *         	90000000	256M	CSD1 SDRAM/DDR
- *         	A0000000	128M	CS0 Flash
- *         	A8000000	128M	CS1 Flash
- *         	B0000000	32M	CS2
- *         	B2000000	32M	CS3
- * F4000000	B4000000	32M	CS4
- *         	B6000000	32M	CS5
- * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
- *         	C0000000	64M	PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*
  * IRAM
  */
-#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
-#define IRAM_BASE_ADDR_VIRT	0xF8000000
-#define IRAM_SIZE		SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_BASE_ADDR_VIRT	0xF9000000
-#define L2CC_SIZE		SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
+#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_SIZE			SZ_16K
 
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
 #define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
 
 #define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
 #define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
 #define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
 #define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
 
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
 #define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
 #define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
 #define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
 #define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
 #define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
-
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
 
-#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
 
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __iomem *) \
-	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
-	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
-	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
-	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
-	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
-	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
-	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x)  \
-	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x)  \
-	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x)  \
-	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x)  \
-	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x)  \
-	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)  \
-	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843	0
-#define MXC_INT_RESV1		1
-#define MXC_INT_CS8900A		2
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
 #define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_RTIC		6
 #define MXC_INT_FIRI		7
-#define MXC_INT_MMC_SDHC2	8
+#define MX31_INT_MMC_SDHC2	8
 #define MXC_INT_MMC_SDHC1	9
-#define MXC_INT_I2C		10
-#define MXC_INT_SSI2		11
-#define MXC_INT_SSI1		12
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
+#define MX31_INT_SSI2		11
+#define MX31_INT_SSI1		12
 #define MXC_INT_MBX		16
 #define MXC_INT_CSPI3		17
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
 #define MXC_INT_SIM2		20
 #define MXC_INT_SIM1		21
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_RESV30		30
-#define MXC_INT_RESV31		31
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
+#define MXC_INT_CCM_DVFS	31
 #define MXC_INT_USB1		35
 #define MXC_INT_USB2		36
 #define MXC_INT_USB3		37
 #define MXC_INT_USB4		38
-#define MXC_INT_MSHC1		39
 #define MXC_INT_MSHC2		40
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_RESV43		43
-#define MXC_INT_RESV44		44
-#define MXC_INT_UART1		45
 #define MXC_INT_UART4		46
 #define MXC_INT_UART5		47
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
 #define MXC_INT_CCM		53
 #define MXC_INT_PCMCIA		54
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_RESV57		57
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31()		(1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
-	return system_rev;
-}
-#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
new file mode 100644
index 00000000000..6465fefb42e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -0,0 +1,29 @@
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
+#define MX35_IRAM_SIZE		SZ_128K
+
+#define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_NFC_BASE_ADDR	0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE		2
+#define MX35_INT_MMC_SDHC1	7
+#define MXC_INT_MMC_SDHC2	8
+#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_SSI1		11
+#define MX35_INT_SSI2		12
+#define MXC_INT_GPU2D		16
+#define MXC_INT_ASRC		17
+#define MXC_INT_USBHS		35
+#define MXC_INT_USBOTG		37
+#define MXC_INT_ESAI		40
+#define MXC_INT_CAN1		43
+#define MXC_INT_CAN2		44
+#define MXC_INT_MLB		46
+#define MXC_INT_SPDIF		47
+#define MXC_INT_FEC		57
+
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
new file mode 100644
index 00000000000..83a172b51b0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FC000000	43F00000	1M	AIPS 1
+ * FC100000	50000000	1M	SPBA
+ * FC200000	53F00000	1M	AIPS 2
+ * FC500000	60000000	128M	ROMPATCH
+ * FC400000	68000000	128M	AVIC
+ *         	70000000	256M	IPU (MAX M2)
+ *         	80000000	256M	CSD0 SDRAM/DDR
+ *         	90000000	256M	CSD1 SDRAM/DDR
+ *         	A0000000	128M	CS0 Flash
+ *         	A8000000	128M	CS1 Flash
+ *         	B0000000	32M	CS2
+ *         	B2000000	32M	CS3
+ * F4000000	B4000000	32M	CS4
+ *         	B6000000	32M	CS5
+ * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *         	C0000000	64M	PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2CC_SIZE		SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR		0x43F00000
+#define AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define AIPS1_SIZE		SZ_1M
+
+#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+#define SPBA0_BASE_ADDR_VIRT	0xFC100000
+#define SPBA0_SIZE		SZ_1M
+
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR		0x53F00000
+#define AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define AIPS2_SIZE		SZ_1M
+#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR		0x60000000
+#define ROMP_BASE_ADDR_VIRT	0xFC500000
+#define ROMP_SIZE		SZ_1M
+
+#define AVIC_BASE_ADDR		0x68000000
+#define AVIC_BASE_ADDR_VIRT	0xFC400000
+#define AVIC_SIZE		SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR	0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
+#define X_MEMC_SIZE		SZ_64K
+
+#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(void __iomem *) \
+	(((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x)  \
+	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3		3
+#define MXC_INT_I2C2		4
+#define MXC_INT_RTIC		6
+#define MXC_INT_I2C		10
+#define MXC_INT_CSPI2		13
+#define MXC_INT_CSPI1		14
+#define MXC_INT_ATA		15
+#define MXC_INT_UART3		18
+#define MXC_INT_IIM		19
+#define MXC_INT_RNGA		22
+#define MXC_INT_EVTMON		23
+#define MXC_INT_KPP		24
+#define MXC_INT_RTC		25
+#define MXC_INT_PWM		26
+#define MXC_INT_EPIT2		27
+#define MXC_INT_EPIT1		28
+#define MXC_INT_GPT		29
+#define MXC_INT_POWER_FAIL	30
+#define MXC_INT_UART2		32
+#define MXC_INT_NANDFC		33
+#define MXC_INT_SDMA		34
+#define MXC_INT_MSHC1		39
+#define MXC_INT_IPU_ERR		41
+#define MXC_INT_IPU_SYN		42
+#define MXC_INT_UART1		45
+#define MXC_INT_ECT		48
+#define MXC_INT_SCC_SCM		49
+#define MXC_INT_SCC_SMN		50
+#define MXC_INT_GPIO2		51
+#define MXC_INT_GPIO1		52
+#define MXC_INT_WDOG		55
+#define MXC_INT_GPIO3		56
+#define MXC_INT_EXT_POWER	58
+#define MXC_INT_EXT_TEMPER	59
+#define MXC_INT_EXT_SENSOR60	60
+#define MXC_INT_EXT_SENSOR61	61
+#define MXC_INT_EXT_WDOG	62
+#define MXC_INT_EXT_TV		63
+
+#define PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_1_1		0x11
+#define CHIP_REV_1_2		0x12
+#define CHIP_REV_1_3		0x13
+#define CHIP_REV_2_0		0x20
+#define CHIP_REV_2_1		0x21
+#define CHIP_REV_2_2		0x22
+#define CHIP_REV_2_3		0x23
+#define CHIP_REV_3_0		0x30
+#define CHIP_REV_3_1		0x31
+#define CHIP_REV_3_2		0x32
+
+#define SYSTEM_REV_MIN		CHIP_REV_1_0
+#define SYSTEM_REV_NUM		3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x00
+#define GPIO_GDIR	 	0x04
+#define GPIO_PSR	 	0x08
+#define GPIO_ICR1	 	0x0C
+#define GPIO_ICR2	 	0x10
+#define GPIO_IMR	 	0x14
+#define GPIO_ISR	 	0x18
+#define GPIO_INT_LOW_LEV	0x0
+#define GPIO_INT_HIGH_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_FALL_EDGE	0x3
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS		96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+