Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

2 files changed, 55 insertions, 39 deletions

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index d8b65b51f2a..f79f78a1c0e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -512,12 +512,16 @@ enum iomux_pins {
 #define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__SFS		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__SCK		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__STXDA		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__SRXDA	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
@@ -721,6 +725,7 @@ enum iomux_pins {
 #define MX31_PIN_KEY_ROW2_KEY_ROW2	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW3_KEY_ROW3	IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW4_KEY_ROW4	IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW4_GPIO		IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_KEY_ROW5_KEY_ROW5	IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW6_KEY_ROW6	IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW7_KEY_ROW7	IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 8397a2dd19f..a8b93c5f29b 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -34,91 +34,98 @@
 		.global imx_ssi_fiq_rx_buffer
 		.global imx_ssi_fiq_tx_buffer
 
+/*
+ * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol
+ * using ENDPROC().  imx_ssi_fiq_start and imx_ssi_fiq_end are used to
+ * mark the function body so that it can be copied to the FIQ vector in
+ * the vectors page.  imx_ssi_fiq_start should only be called as the result
+ * of an FIQ: calling it directly will not work.
+ */
 imx_ssi_fiq_start:
-		ldr r12, imx_ssi_fiq_base
+		ldr r12, .L_imx_ssi_fiq_base
 
 		/* TX */
-		ldr r11, imx_ssi_fiq_tx_buffer
+		ldr r13, .L_imx_ssi_fiq_tx_buffer
 
 		/* shall we send? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_TFE0_EN
+		ldr r11, [r12, #SSI_SIER]
+		tst r11, #SSI_SIER_TFE0_EN
 		beq 1f
 
 		/* TX FIFO empty? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_TFE0
+		ldr r11, [r12, #SSI_SISR]
+		tst r11, #SSI_SISR_TFE0
 		beq 1f
 
 		mov r10, #0x10000
 		sub r10, #1
 		and r10, r10, r8	/* r10: current buffer offset */
 
-		add r11, r11, r10
+		add r13, r13, r10
 
-		ldrh r13, [r11]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #2]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #2]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #4]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #4]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #6]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #6]
+		strh r11, [r12, #SSI_STX0]
 
 		add r10, #8
-		lsr r13, r8, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r8, r13, #16
+		lsr r11, r8, #16	/* r11: buffer size */
+		cmp r10, r11
+		lslgt r8, r11, #16
 		addle r8, #8
 1:
 		/* RX */
 
 		/* shall we receive? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_RFF0_EN
+		ldr r11, [r12, #SSI_SIER]
+		tst r11, #SSI_SIER_RFF0_EN
 		beq 1f
 
 		/* RX FIFO full? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_RFF0
+		ldr r11, [r12, #SSI_SISR]
+		tst r11, #SSI_SISR_RFF0
 		beq 1f
 
-		ldr r11, imx_ssi_fiq_rx_buffer
+		ldr r13, .L_imx_ssi_fiq_rx_buffer
 
 		mov r10, #0x10000
 		sub r10, #1
 		and r10, r10, r9	/* r10: current buffer offset */
 
-		add r11, r11, r10
+		add r13, r13, r10
 
-		ldr r13, [r12, #SSI_SACNT]
-		tst r13, #SSI_SACNT_AC97EN
+		ldr r11, [r12, #SSI_SACNT]
+		tst r11, #SSI_SACNT_AC97EN
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #2]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #2]
 
 		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
+		ldrne r11, [r12, #SSI_SRX0]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #4]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #4]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #6]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #6]
 
 		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
+		ldrne r11, [r12, #SSI_SRX0]
 
 		add r10, #8
-		lsr r13, r9, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r9, r13, #16
+		lsr r11, r9, #16	/* r11: buffer size */
+		cmp r10, r11
+		lslgt r9, r11, #16
 		addle r9, #8
 
 1:
@@ -126,11 +133,15 @@ imx_ssi_fiq_start:
 		subs	pc, lr, #4
 
 		.align
+.L_imx_ssi_fiq_base:
 imx_ssi_fiq_base:
 		.word 0x0
+.L_imx_ssi_fiq_rx_buffer:
 imx_ssi_fiq_rx_buffer:
 		.word 0x0
+.L_imx_ssi_fiq_tx_buffer:
 imx_ssi_fiq_tx_buffer:
 		.word 0x0
+.L_imx_ssi_fiq_end:
 imx_ssi_fiq_end: