Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.33

1 files changed, 178 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
new file mode 100644
index 00000000000..abb17b604f8
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -0,0 +1,178 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
+#endif