omap: Make uncompress code and DEBUG_LL code generic

Define arch_decomp_setup() the same way as some other
architectures do. Use arch_id to configure the debug uart
based on the machine_is by storing it into the uart
scratchpad register for DEBUG_LL code to use.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 133 insertions, 49 deletions

diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index e5723c3e341..81d9ec540fc 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,63 +19,38 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
+
+#include <asm/mach-types.h>
+
 #include <plat/serial.h>
 
-unsigned int system_rev;
+static volatile u8 *uart1_base;
+static int uart1_shift;
 
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define OMAP_ID_850		0x362C
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+static volatile u8 *uart_base;
+static int uart_shift;
 
-static void putc(int c)
+/*
+ * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * See also debug-macro.S, and serial.c for related code.
+ *
+ * Please note that we currently assume that:
+ * - UART1 clocks are enabled for register access
+ * - UART1 scratchpad register can be used
+ */
+static void set_uart1_scratchpad(unsigned char port)
 {
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-	/* Will get removed in the next patch, set to OMAP3 to compile */
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP3_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP3_UART2_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
-	uart = (volatile u8 *)(OMAP3_UART1_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
-	return;
-#else
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
-			shift = 0;
+	uart1_base[UART_SCR << uart1_shift] = port;
+}
 
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
+static void putc(int c)
+{
+	if (!uart_base)
 		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
 
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
 		barrier();
-	uart[UART_TX << shift] = c;
+	uart_base[UART_TX << uart_shift] = c;
 }
 
 static inline void flush(void)
@@ -83,7 +58,116 @@ static inline void flush(void)
 }
 
 /*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
+			dbg_uart, dbg_shft, dbg_id)			\
+	if (machine_is_##mach()) {					\
+		uart1_base = (volatile u8 *)(uart1_phys);		\
+		uart1_shift = (uart1_shft);				\
+		uart_base = (volatile u8 *)(dbg_uart);			\
+		uart_shift = (dbg_shft);				\
+		port = (dbg_id);					\
+		set_uart1_scratchpad(port);				\
+		break;							\
+	}
+
+#define DEBUG_LL_OMAP7XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
+		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	int port = 0;
+
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* omap7xx/8xx based boards using UART1 with shift 0 */
+		DEBUG_LL_OMAP7XX(1, herald);
+		DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+		/* omap15xx/16xx based boards using UART1 */
+		DEBUG_LL_OMAP1(1, ams_delta);
+		DEBUG_LL_OMAP1(1, nokia770);
+		DEBUG_LL_OMAP1(1, omap_h2);
+		DEBUG_LL_OMAP1(1, omap_h3);
+		DEBUG_LL_OMAP1(1, omap_innovator);
+		DEBUG_LL_OMAP1(1, omap_osk);
+		DEBUG_LL_OMAP1(1, omap_palmte);
+		DEBUG_LL_OMAP1(1, omap_palmz71);
+
+		/* omap15xx/16xx based boards using UART2 */
+		DEBUG_LL_OMAP1(2, omap_palmtt);
+
+		/* omap15xx/16xx based boards using UART3 */
+		DEBUG_LL_OMAP1(3, sx1);
+
+		/* omap2 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap2evm);
+		DEBUG_LL_OMAP2(1, omap_2430sdp);
+		DEBUG_LL_OMAP2(1, omap_apollon);
+		DEBUG_LL_OMAP2(1, omap_h4);
+
+		/* omap2 based boards using UART3 */
+		DEBUG_LL_OMAP2(3, nokia_n800);
+		DEBUG_LL_OMAP2(3, nokia_n810);
+		DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+		/* omap3 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap3evm);
+		DEBUG_LL_OMAP3(1, omap_3430sdp);
+		DEBUG_LL_OMAP3(1, omap_3630sdp);
+
+		/* omap3 based boards using UART3 */
+		DEBUG_LL_OMAP3(3, cm_t35);
+		DEBUG_LL_OMAP3(3, igep0020);
+		DEBUG_LL_OMAP3(3, nokia_rx51);
+		DEBUG_LL_OMAP3(3, omap3517evm);
+		DEBUG_LL_OMAP3(3, omap3_beagle);
+		DEBUG_LL_OMAP3(3, omap3_pandora);
+		DEBUG_LL_OMAP3(3, omap_ldp);
+		DEBUG_LL_OMAP3(3, overo);
+		DEBUG_LL_OMAP3(3, touchbook);
+
+		/* omap4 based boards using UART3 */
+		DEBUG_LL_OMAP4(3, omap_4430sdp);
+
+		/* zoom2/3 external uart */
+		DEBUG_LL_ZOOM(omap_zoom2);
+		DEBUG_LL_ZOOM(omap_zoom3);
+
+	} while (0);
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+/*
  * nothing to do
  */
-#define arch_decomp_setup()
 #define arch_decomp_wdog()