ARM: omap: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the omap include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: linux-omap@vger.kernel.org

9 files changed, 0 insertions, 392 deletions

diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
deleted file mode 100644
index 5927709b190..00000000000
--- a/arch/arm/plat-omap/include/plat/dsp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __OMAP_DSP_H__
-#define __OMAP_DSP_H__
-
-#include <linux/types.h>
-
-struct omap_dsp_platform_data {
-	void (*dsp_set_min_opp) (u8 opp_id);
-	u8 (*dsp_get_opp) (void);
-	void (*cpu_set_freq) (unsigned long f);
-	unsigned long (*cpu_get_freq) (void);
-	unsigned long mpu_speed[6];
-
-	/* functions to write and read PRCM registers */
-	void (*dsp_prm_write)(u32, s16 , u16);
-	u32 (*dsp_prm_read)(s16 , u16);
-	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
-	void (*dsp_cm_write)(u32, s16 , u16);
-	u32 (*dsp_cm_read)(s16 , u16);
-	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
-
-	void (*set_bootaddr)(u32);
-	void (*set_bootmode)(u8);
-
-	phys_addr_t phys_mempool_base;
-	phys_addr_t phys_mempool_size;
-};
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-extern void omap_dsp_reserve_sdram_memblock(void);
-#else
-static inline void omap_dsp_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
deleted file mode 100644
index a6b21eddb21..00000000000
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-#ifndef CONFIG_ARCH_OMAP1
-#warning Please update the board to use matrix-keypad driver
-#define omap_readw(reg)		0
-#define omap_writew(val, reg)	do {} while (0)
-#endif
-#include <linux/input/matrix_keypad.h>
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	const struct matrix_keymap_data *keymap_data;
-	bool rep;
-	unsigned long delay;
-	bool dbounce;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. Two free bits, not used by neither row/col nor keynum,
- * must be available for use as group bits. The below GROUP_SHIFT
- * macro definition is based on some prior knowledge of the
- * matrix_keypad defined KEY() macro internals.
- */
-#define GROUP_SHIFT	14
-#define GROUP_0		(0 << GROUP_SHIFT)
-#define GROUP_1		(1 << GROUP_SHIFT)
-#define GROUP_2		(2 << GROUP_SHIFT)
-#define GROUP_3		(3 << GROUP_SHIFT)
-#define GROUP_MASK	GROUP_3
-#if KEY_MAX & GROUP_MASK
-#error Group bits in conflict with keynum bits
-#endif
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
deleted file mode 100644
index 8e52c657228..00000000000
--- a/arch/arm/plat-omap/include/plat/lcd_mipid.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
-	MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
-	MIPID_TEST_SUCCESS,
-	MIPID_TEST_INVALID,
-	MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
-	int	nreset_gpio;
-	int	data_lines;
-
-	void	(*shutdown)(struct mipid_platform_data *pdata);
-	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
-				     int level);
-	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
-	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
deleted file mode 100644
index 18814127809..00000000000
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	struct omap_mcbsp_ops *ops;
-	u16 buffer_size;
-	u8 reg_size;
-	u8 reg_step;
-
-	/* McBSP platform and instance specific features */
-	bool has_wakeup; /* Wakeup capability */
-	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
-	int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
-	int (*mux_signal)(struct device *dev, const char *signal, const char *src);
-};
-
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
deleted file mode 100644
index a357eb26bd2..00000000000
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
-struct omap2_mcspi_platform_config {
-	unsigned short	num_cs;
-	unsigned int regs_offset;
-};
-
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
-struct omap2_mcspi_device_config {
-	unsigned turbo_mode:1;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
deleted file mode 100644
index 1a68c1e5fe5..00000000000
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/gpmc.h>
-#include <linux/mtd/partitions.h>
-
-enum nand_io {
-	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
-	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
-	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
-	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
-};
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
-	int			nr_parts;
-	bool			dev_ready;
-	enum nand_io		xfer_type;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-	struct gpmc_nand_regs	reg;
-};
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
-#endif
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
deleted file mode 100644
index 2858667d2e4..00000000000
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define ONENAND_SYNC_READ	(1 << 0)
-#define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
-	int			dma_channel;
-	u8			flags;
-	u8			regulator_can_sleep;
-	u8			skip_initial_unlocking;
-};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h
deleted file mode 100644
index b10eac89e2e..00000000000
--- a/arch/arm/plat-omap/include/plat/remoteproc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- */
-struct omap_rproc_pdata {
-	const char *name;
-	const char *oh_name;
-	const char *oh_name_opt;
-	const char *firmware;
-	const char *mbox_name;
-	const struct rproc_ops *ops;
-	int (*device_enable) (struct platform_device *pdev);
-	int (*device_shutdown) (struct platform_device *pdev);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 5be4d5def42..00000000000
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Copyright (C) 2011, Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
-#define __ARCH_ARM_OMAP_VOLTAGE_H
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-struct voltagedomain;
-
-struct voltagedomain *voltdm_lookup(const char *name);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-		unsigned long volt);
-#endif