ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 676 deletions

diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
deleted file mode 100644
index b3349f7b1a2..00000000000
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * omap_hwmod macros, structures
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * Created in collaboration with (alphabetical order): Benoît Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These headers and macros are used to define OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- * Copious documentation and references can also be found in the
- * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
- * writing).
- *
- * To do:
- * - add interconnect error log structures
- * - add pinmuxing
- * - init_conn_id_bit (CONNID_BIT_VECTOR)
- * - implement default hwmod SMS/SDRC flags?
- * - move Linux-specific data ("non-ROM data") out
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <plat/cpu.h>
-
-struct omap_device;
-
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
- * with the original PRCM protocol defined for OMAP2420
- */
-#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
-#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
-#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
-#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
-#define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
-#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
- * with the new PRCM protocol defined for new OMAP4 IPs.
- */
-#define SYSC_TYPE2_SOFTRESET_SHIFT	0
-#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
-#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
-#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
-#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
-#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
-#define SYSC_TYPE2_DMADISABLE_SHIFT	16
-#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE3.
- * This is applicable for some IPs present in AM33XX
- */
-#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
-#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
-#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
-#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
-
-/* OCP SYSSTATUS bit shifts/masks */
-#define SYSS_RESETDONE_SHIFT		0
-#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-
-/* Master standby/slave idle mode flags */
-#define HWMOD_IDLEMODE_FORCE		(1 << 0)
-#define HWMOD_IDLEMODE_NO		(1 << 1)
-#define HWMOD_IDLEMODE_SMART		(1 << 2)
-#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
-
-/* modulemode control type (SW or HW) */
-#define MODULEMODE_HWCTRL		1
-#define MODULEMODE_SWCTRL		2
-
-
-/**
- * struct omap_hwmod_mux_info - hwmod specific mux configuration
- * @pads:              array of omap_device_pad entries
- * @nr_pads:           number of omap_device_pad entries
- *
- * Note that this is currently built during init as needed.
- */
-struct omap_hwmod_mux_info {
-	int				nr_pads;
-	struct omap_device_pad		*pads;
-	int				nr_pads_dynamic;
-	struct omap_device_pad		**pads_dynamic;
-	int				*irqs;
-	bool				enabled;
-};
-
-/**
- * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
- * @name: name of the IRQ channel (module local name)
- * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_irq_info {
-	const char	*name;
-	s16		irq;
-};
-
-/**
- * struct omap_hwmod_dma_info - DMA channels used by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	s16		dma_req;
-};
-
-/**
- * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
- * @name: name of the reset line (module local name)
- * @rst_shift: Offset of the reset bit
- * @st_shift: Offset of the reset status bit (OMAP2/3 only)
- *
- * @name should be something short, e.g., "cpu0" or "rst". It is defined
- * locally to the hwmod.
- */
-struct omap_hwmod_rst_info {
-	const char	*name;
-	u8		rst_shift;
-	u8		st_shift;
-};
-
-/**
- * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
- * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clk: opt clock: OMAP clock name
- * @_clk: pointer to the struct clk (filled in at runtime)
- *
- * The module's interface clock and main functional clock should not
- * be added as optional clocks.
- */
-struct omap_hwmod_opt_clk {
-	const char	*role;
-	const char	*clk;
-	struct clk	*_clk;
-};
-
-
-/* omap_hwmod_omap2_firewall.flags bits */
-#define OMAP_FIREWALL_L3		(1 << 0)
-#define OMAP_FIREWALL_L4		(1 << 1)
-
-/**
- * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
- * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
- * @l4_fw_region: L4 firewall region ID
- * @l4_prot_group: L4 protection group ID
- * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
- */
-struct omap_hwmod_omap2_firewall {
-	u8 l3_perm_bit;
-	u8 l4_fw_region;
-	u8 l4_prot_group;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - address space handled by the hwmod
- * @name: name of the address space
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	const char *name;
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
- * interface to interact with the hwmod.  Used to add sleep dependencies
- * when the module is enabled or disabled.
- */
-#define OCP_USER_MPU			(1 << 0)
-#define OCP_USER_SDMA			(1 << 1)
-#define OCP_USER_DSP			(1 << 2)
-#define OCP_USER_IVA			(1 << 3)
-
-/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_SWSUP_IDLE		(1 << 0)
-#define OCPIF_CAN_BURST			(1 << 1)
-
-/* omap_hwmod_ocp_if._int_flags possibilities */
-#define _OCPIF_INT_FLAGS_REGISTERED	(1 << 0)
-
-
-/**
- * struct omap_hwmod_ocp_if - OCP interface data
- * @master: struct omap_hwmod that initiates OCP transactions on this link
- * @slave: struct omap_hwmod that responds to OCP transactions on this link
- * @addr: address space associated with this link
- * @clk: interface clock: OMAP clock name
- * @_clk: pointer to the interface struct clk (filled in at runtime)
- * @fw: interface firewall data
- * @width: OCP data width
- * @user: initiators using this interface (see OCP_USER_* macros above)
- * @flags: OCP interface flags (see OCPIF_* macros above)
- * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
- *
- * It may also be useful to add a tag_cnt field for OCP2.x devices.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod_ocp_if {
-	struct omap_hwmod		*master;
-	struct omap_hwmod		*slave;
-	struct omap_hwmod_addr_space	*addr;
-	const char			*clk;
-	struct clk			*_clk;
-	union {
-		struct omap_hwmod_omap2_firewall omap2;
-	}				fw;
-	u8				width;
-	u8				user;
-	u8				flags;
-	u8				_int_flags;
-};
-
-
-/* Macros for use in struct omap_hwmod_sysconfig */
-
-/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	4
-#define SLAVE_IDLE_SHIFT	0
-#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
-#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
-#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
-
-/* omap_hwmod_sysconfig.sysc_flags capability flags */
-#define SYSC_HAS_AUTOIDLE	(1 << 0)
-#define SYSC_HAS_SOFTRESET	(1 << 1)
-#define SYSC_HAS_ENAWAKEUP	(1 << 2)
-#define SYSC_HAS_EMUFREE	(1 << 3)
-#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
-#define SYSC_HAS_SIDLEMODE	(1 << 5)
-#define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_HAS_RESET_STATUS	(1 << 7)
-#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
-#define SYSC_HAS_RESET_STATUS	(1 << 9)
-#define SYSC_HAS_DMADISABLE	(1 << 10)
-
-/* omap_hwmod_sysconfig.clockact flags */
-#define CLOCKACT_TEST_BOTH	0x0
-#define CLOCKACT_TEST_MAIN	0x1
-#define CLOCKACT_TEST_ICLK	0x2
-#define CLOCKACT_TEST_NONE	0x3
-
-/**
- * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
- * @midle_shift: Offset of the midle bit
- * @clkact_shift: Offset of the clockactivity bit
- * @sidle_shift: Offset of the sidle bit
- * @enwkup_shift: Offset of the enawakeup bit
- * @srst_shift: Offset of the softreset bit
- * @autoidle_shift: Offset of the autoidle bit
- * @dmadisable_shift: Offset of the dmadisable bit
- */
-struct omap_hwmod_sysc_fields {
-	u8 midle_shift;
-	u8 clkact_shift;
-	u8 sidle_shift;
-	u8 enwkup_shift;
-	u8 srst_shift;
-	u8 autoidle_shift;
-	u8 dmadisable_shift;
-};
-
-/**
- * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
- * @rev_offs: IP block revision register offset (from module base addr)
- * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
- * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
- * @srst_udelay: Delay needed after doing a softreset in usecs
- * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
- * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
- * @clockact: the default value of the module CLOCKACTIVITY bits
- *
- * @clockact describes to the module which clocks are likely to be
- * disabled when the PRCM issues its idle request to the module.  Some
- * modules have separate clockdomains for the interface clock and main
- * functional clock, and can check whether they should acknowledge the
- * idle request based on the internal module functionality that has
- * been associated with the clocks marked in @clockact.  This field is
- * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
- *
- * @sysc_fields: structure containing the offset positions of various bits in
- * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
- * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
- * whether the device ip is compliant with the original PRCM protocol
- * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
- * If the device follows a different scheme for the sysconfig register ,
- * then this field has to be populated with the correct offset structure.
- */
-struct omap_hwmod_class_sysconfig {
-	u32 rev_offs;
-	u32 sysc_offs;
-	u32 syss_offs;
-	u16 sysc_flags;
-	struct omap_hwmod_sysc_fields *sysc_fields;
-	u8 srst_udelay;
-	u8 idlemodes;
-	u8 clockact;
-};
-
-/**
- * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM
- * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
- * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
- * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
- * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
- * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
- *
- * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
- * WKEN, GRPSEL registers.  In an ideal world, no extra information
- * would be needed for IDLEST information, but alas, there are some
- * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
- * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
- */
-struct omap_hwmod_omap2_prcm {
-	s16 module_offs;
-	u8 prcm_reg_id;
-	u8 module_bit;
-	u8 idlest_reg_id;
-	u8 idlest_idle_bit;
-	u8 idlest_stdby_bit;
-};
-
-/*
- * Possible values for struct omap_hwmod_omap4_prcm.flags
- *
- * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
- *     module-level context loss register associated with them; this
- *     flag bit should be set in those cases
- */
-#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
-
-/**
- * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
- * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
- * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
- * @submodule_wkdep_bit: bit shift of the WKDEP range
- * @flags: PRCM register capabilities for this IP block
- *
- * If @lostcontext_mask is not defined, context loss check code uses
- * whole register without masking. @lostcontext_mask should only be
- * defined in cases where @context_offs register is shared by two or
- * more hwmods.
- */
-struct omap_hwmod_omap4_prcm {
-	u16		clkctrl_offs;
-	u16		rstctrl_offs;
-	u16		rstst_offs;
-	u16		context_offs;
-	u32		lostcontext_mask;
-	u8		submodule_wkdep_bit;
-	u8		modulemode;
-	u8		flags;
-};
-
-
-/*
- * omap_hwmod.flags definitions
- *
- * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
- *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
- * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_RESET
- * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_IDLE
- * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
- *     when module is enabled, rather than the default, which is to
- *     enable autoidle
- * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
- *     only for few initiator modules on OMAP2 & 3.
- * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
- *     This is needed for devices like DSS that require optional clocks enabled
- *     in order to complete the reset. Optional clocks will be disabled
- *     again after the reset.
- * HWMOD_16BIT_REG: Module has 16bit registers
- */
-#define HWMOD_SWSUP_SIDLE			(1 << 0)
-#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
-#define HWMOD_INIT_NO_RESET			(1 << 2)
-#define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
-#define HWMOD_NO_IDLEST				(1 << 6)
-#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
-#define HWMOD_16BIT_REG				(1 << 8)
-
-/*
- * omap_hwmod._int_flags definitions
- * These are for internal use only and are managed by the omap_hwmod code.
- *
- * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
- * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
- * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
- *     causes the first call to _enable() to only update the pinmux
- */
-#define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
-
-/*
- * omap_hwmod._state definitions
- *
- * INITIALIZED: reset (optionally), initialized, enabled, disabled
- *              (optionally)
- *
- *
- */
-#define _HWMOD_STATE_UNKNOWN			0
-#define _HWMOD_STATE_REGISTERED			1
-#define _HWMOD_STATE_CLKS_INITED		2
-#define _HWMOD_STATE_INITIALIZED		3
-#define _HWMOD_STATE_ENABLED			4
-#define _HWMOD_STATE_IDLE			5
-#define _HWMOD_STATE_DISABLED			6
-
-/**
- * struct omap_hwmod_class - the type of an IP block
- * @name: name of the hwmod_class
- * @sysc: device SYSCONFIG/SYSSTATUS register data
- * @rev: revision of the IP class
- * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
- * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- *
- * Represent the class of a OMAP hardware "modules" (e.g. timer,
- * smartreflex, gpio, uart...)
- *
- * @pre_shutdown is a function that will be run immediately before
- * hwmod clocks are disabled, etc.  It is intended for use for hwmods
- * like the MPU watchdog, which cannot be disabled with the standard
- * omap_hwmod_shutdown().  The function should return 0 upon success,
- * or some negative error upon failure.  Returning an error will cause
- * omap_hwmod_shutdown() to abort the device shutdown and return an
- * error.
- *
- * If @reset is defined, then the function it points to will be
- * executed in place of the standard hwmod _reset() code in
- * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
- * unusual reset sequences - usually processor IP blocks like the IVA.
- */
-struct omap_hwmod_class {
-	const char				*name;
-	struct omap_hwmod_class_sysconfig	*sysc;
-	u32					rev;
-	int					(*pre_shutdown)(struct omap_hwmod *oh);
-	int					(*reset)(struct omap_hwmod *oh);
-};
-
-/**
- * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
- * @ocp_if: OCP interface structure record pointer
- * @node: list_head pointing to next struct omap_hwmod_link in a list
- */
-struct omap_hwmod_link {
-	struct omap_hwmod_ocp_if	*ocp_if;
-	struct list_head		node;
-};
-
-/**
- * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
- * @name: name of the hwmod
- * @class: struct omap_hwmod_class * to the class of this hwmod
- * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs
- * @sdma_reqs: ptr to an array of System DMA request IDs
- * @prcm: PRCM data pertaining to this hwmod
- * @main_clk: main clock: OMAP clock name
- * @_clk: pointer to the main struct clk (filled in at runtime)
- * @opt_clks: other device clocks that drivers can request (0..*)
- * @voltdm: pointer to voltage domain (filled in at runtime)
- * @dev_attr: arbitrary device attributes that can be passed to the driver
- * @_sysc_cache: internal-use hwmod flags
- * @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port: cached MPU register target slave (internal use)
- * @opt_clks_cnt: number of @opt_clks
- * @master_cnt: number of @master entries
- * @slaves_cnt: number of @slave entries
- * @response_lat: device OCP response latency (in interface clock cycles)
- * @_int_flags: internal-use hwmod flags
- * @_state: internal-use hwmod state
- * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
- * @flags: hwmod flags (documented below)
- * @_lock: spinlock serializing operations on this hwmod
- * @node: list node for hwmod list (internal use)
- *
- * @main_clk refers to this module's "main clock," which for our
- * purposes is defined as "the functional clock needed for register
- * accesses to complete."  Modules may not have a main clock if the
- * interface clock also serves as a main clock.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- *
- * @masters and @slaves are now deprecated.
- */
-struct omap_hwmod {
-	const char			*name;
-	struct omap_hwmod_class		*class;
-	struct omap_device		*od;
-	struct omap_hwmod_mux_info	*mux;
-	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_reqs;
-	struct omap_hwmod_rst_info	*rst_lines;
-	union {
-		struct omap_hwmod_omap2_prcm omap2;
-		struct omap_hwmod_omap4_prcm omap4;
-	}				prcm;
-	const char			*main_clk;
-	struct clk			*_clk;
-	struct omap_hwmod_opt_clk	*opt_clks;
-	char				*clkdm_name;
-	struct clockdomain		*clkdm;
-	struct list_head		master_ports; /* connect to *_IA */
-	struct list_head		slave_ports; /* connect to *_TA */
-	void				*dev_attr;
-	u32				_sysc_cache;
-	void __iomem			*_mpu_rt_va;
-	spinlock_t			_lock;
-	struct list_head		node;
-	struct omap_hwmod_ocp_if	*_mpu_port;
-	u16				flags;
-	u8				response_lat;
-	u8				rst_lines_cnt;
-	u8				opt_clks_cnt;
-	u8				masters_cnt;
-	u8				slaves_cnt;
-	u8				hwmods_cnt;
-	u8				_int_flags;
-	u8				_state;
-	u8				_postsetup_state;
-};
-
-struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
-			void *data);
-
-int __init omap_hwmod_setup_one(const char *name);
-
-int omap_hwmod_enable(struct omap_hwmod *oh);
-int omap_hwmod_idle(struct omap_hwmod *oh);
-int omap_hwmod_shutdown(struct omap_hwmod *oh);
-
-int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
-
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
-int omap_hwmod_reset(struct omap_hwmod *oh);
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
-
-void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
-int omap_hwmod_softreset(struct omap_hwmod *oh);
-
-int omap_hwmod_count_resources(struct omap_hwmod *oh);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
-				   const char *name, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
-void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
-
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
-int omap_hwmod_for_each_by_class(const char *classname,
-				 int (*fn)(struct omap_hwmod *oh,
-					   void *user),
-				 void *user);
-
-int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
-
-int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
-
-int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
-
-extern void __init omap_hwmod_init(void);
-
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
-
-/*
- * Chip variant-specific hwmod init routines - XXX should be converted
- * to use initcalls once the initial boot ordering is straightened out
- */
-extern int omap2420_hwmod_init(void);
-extern int omap2430_hwmod_init(void);
-extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-extern int am33xx_hwmod_init(void);
-
-extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
-
-#endif