OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHz

According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the
DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC
clock frequency from 83MHz to 166MHz.  CDP code unconditionally
unlocked the DLL whenever shifting to a lower SDRC speed, but this
seems unnecessary and error-prone, as the DLL is no longer able to
compensate for process, voltage, and temperature variations.  Instead,
only unlock the DLL when the SDRC clock rate would be less than 83MHz.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 4 insertions, 3 deletions

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 38353386e91..876f5a7ecaf 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -365,16 +365,17 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2);
+					      u32 m2, u32 unlock_dll);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
 {
 	if (!_omap3_sram_configure_core_dpll)
 		omap_sram_error();
 
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2);
+					       sdrc_actim_ctrlb, m2,
+					       unlock_dll);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */