OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h

There's no reason for this header file to be in
plat-omap/include/plat/smartreflex.h.  The hardware devices are in
OMAP2+ SoCs only.  Leaving this header file in plat-omap causes
problems due to cross-dependencies with other header files that should
live in mach-omap2/.

Thanks to Benoît Cousson <b-cousson@ti.com> for suggesting the removal
of the smartreflex.h include from the OMAP3xxx hwmod data.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>

1 files changed, 0 insertions, 245 deletions

diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
deleted file mode 100644
index 6568c885f37..00000000000
--- a/arch/arm/plat-omap/include/plat/smartreflex.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-#include <plat/voltage.h>
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1	1
-#define SR_TYPE_V2	2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG		0x00
-#define SRSTATUS		0x04
-#define SENVAL			0x08
-#define SENMIN			0x0C
-#define SENMAX			0x10
-#define SENAVG			0x14
-#define AVGWEIGHT		0x18
-#define NVALUERECIPROCAL	0x1c
-#define SENERROR_V1		0x20
-#define ERRCONFIG_V1		0x24
-#define IRQ_EOI			0x20
-#define IRQSTATUS_RAW		0x24
-#define IRQSTATUS		0x28
-#define IRQENABLE_SET		0x2C
-#define IRQENABLE_CLR		0x30
-#define SENERROR_V2		0x34
-#define ERRCONFIG_V2		0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT	22
-#define SRCONFIG_SRCLKLENGTH_SHIFT	12
-#define SRCONFIG_SENNENABLE_V1_SHIFT	5
-#define SRCONFIG_SENPENABLE_V1_SHIFT	3
-#define SRCONFIG_SENNENABLE_V2_SHIFT	1
-#define SRCONFIG_SENPENABLE_V2_SHIFT	0
-#define SRCONFIG_CLKCTRL_SHIFT		0
-
-#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
-
-#define SRCONFIG_SRENABLE		BIT(11)
-#define SRCONFIG_SENENABLE		BIT(10)
-#define SRCONFIG_ERRGEN_EN		BIT(9)
-#define SRCONFIG_MINMAXAVG_EN		BIT(8)
-#define SRCONFIG_DELAYCTRL		BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
-#define NVALUERECIPROCAL_RNSENP_SHIFT	8
-#define NVALUERECIPROCAL_RNSENN_SHIFT	0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT	16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
-
-#define SR_ERRWEIGHT_MASK		(0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
-#define SR_ERRMINLIMIT_MASK		(0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
-#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
-#define ERRCONFIG_MCUACCUMINTST		BIT(28)
-#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
-#define ERRCONFIG_MCUVALIDINTST		BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
-#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
-#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
-#define ERRCONFIG_MCUDISACKINTST	BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
-					ERRCONFIG_MCUACCUMINTST | \
-					ERRCONFIG_MCUVALIDINTST | \
-					ERRCONFIG_MCUBOUNDINTST | \
-					ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT		BIT(3)
-#define IRQSTATUS_MCVALIDINT		BIT(2)
-#define IRQSTATUS_MCBOUNDSINT		BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT		BIT(3)
-#define IRQENABLE_MCUVALIDINT		BIT(2)
-#define IRQENABLE_MCUBOUNDSINT		BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA		0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
-
-#define OMAP3430_SR_ERRWEIGHT		0x04
-#define OMAP3430_SR_ERRMAXLIMIT		0x02
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- *				pmic specific info to smartreflex driver
- *
- * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
-	void (*sr_pmic_init) (void);
-};
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1	0x1
-#define SR_CLASS2	0x2
-#define SR_CLASS3	0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable:		API to enable a particular class smaartreflex.
- * @disable:		API to disable a particular class smartreflex.
- * @configure:		API to configure a particular class smartreflex.
- * @notify:		API to notify the class driver about an event in SR.
- *			Not needed for class3.
- * @notify_flags:	specify the events to be notified to the class driver
- * @class_type:		specify which smartreflex class.
- *			Can be used by the SR driver to take any class
- *			based decisions.
- */
-struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
-	u8 notify_flags;
-	u8 class_type;
-};
-
-/**
- * struct omap_sr_nvalue_table	- Smartreflex n-target value info
- *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
- */
-struct omap_sr_nvalue_table {
-	u32 efuse_offs;
-	u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type:		Smartreflex IP type.
- * @senp_mod:		SENPENABLE value for the sr
- * @senn_mod:		SENNENABLE value for sr
- * @nvalue_count:	Number of distinct nvalues in the nvalue table
- * @enable_on_init:	whether this sr module needs to enabled at
- *			boot up or not.
- * @nvalue_table:	table containing the  efuse offsets and nvalues
- *			corresponding to them.
- * @voltdm:		Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
-	int				ip_type;
-	u32				senp_mod;
-	u32				senn_mod;
-	int				nvalue_count;
-	bool				enable_on_init;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
-		struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
-		struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif